Shop

  • WINSMART™ TY52 SMART EXPLOSION PROOF TEMPERATURE TRANSMITTER

    • Integrated temperature transmitter with ASIC signaling transmitter
    • Explosion proof smart temperature transmitter for hazardous locations
    • -50 to 400°C (-58/752°F ) measure range
    • 0.5% accuracy
    • Simple to operate 3-push button control
    • HART® or Modbus communications available
    • Low power option available
    • Re-zero function for safe field calibration
    • 10:1 rangeability allows for installation in any application
    • 5 year warranty
    TY52 can be utilized and installed anywhere where temperature measurement is required. From Oil & Gas installations to Power Generation, this product has a rugged design and is equipped with the communication protocols to meet all your day to day requirements
  • D74 2-PIECE INDUSTRIAL SEAL

    • Two piece construction and designed to withstand even the most severe process applications
    • “Continuous use” seals – backing plate will prevent diaphragm from rupturing if pressure sensing instrument fails. Pressure will be held until instrument is replaced
    • Diaphragm is separable for servicing and is available with a 1/4” NPT flushing connection for removing any material which may clog the process connection
    • Standard diaphragm is constructed of AISI 316 stainless steel and welded to the upper chamber of the seal
    • ASME B40.100 compliant
    • 5 year warranty
    Where the media is low in pressure and the process fluid is corrosive or viscous and would clog instrument internals/solidify within the pressure gauge, switch or transmitter
  • BBV DOUBLE BLOCK & BLEED VALVE

    • Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
    • Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal of replacement instruments
    • The 1/4″ NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
    • Available in Hard Seat (10,000 psi)
    • All stems are 316 stainless steel
    • CRN registered
    • 5 year warranty
    Ideally suited for severe duty oil and gas installations including refineries and processing plants as well as water treatment plants, power plants and hydraulic applications
  • WINSMART™ LY36 SMART EXPLOSION PROOF DIFFERENTIAL PRESSURE TRANSMITTER

    • Monosilicone-based high performing transmitter
    • Explosion-proof smart differential pressure transmitter for hazardous locations
    • Sour gas NACE0175 compliant
    • Built-in temperature sensor
    • 0.075% or 0.05% accuracy
    • Simple to operate 3-push button control
    • HART® or Modbus communications are available
    • Low power option available
    • Re-zero function for safe field calibration
    • 10:1 rangeability allows for installation in any application
    • CRN Registered
    • 5-year warranty
    • Differential pressure transmitters are useful instruments for measuring the difference between two pressures. If you’re looking for a differential pressure transmitter, look no further! Our LY36 smart differential pressure transmitter is one of the top-performing differential pressure transmitters in the market.
    Differential pressure monitoring for oil and gas installations, well head process control, petrochemical installations, power generation equipment and all hazardous locations
  • WINSMART™ LY16 SMART EXPLOSION PROOF PRESSURE TRANSMITTER

    • Microprocessor-based high performing transmitter
    • Explosion-proof smart pressure transmitter for hazardous locations
    • Sour gas NACE0175 compliant,Built-in temperature sensor
    • 0.2% standard; 0.5%, 0.1%, 0.075% or 0.05% optional
    • Simple to operate 3-push button control,HART® or Modbus communications are available
    • Low power option available,Re-zero function for safe field calibration,10:1 rangeability allows for installation in any application,
    • CRN Registered,5-year warranty
    Pressure monitoring for oil and gas, well head process control, petrochemical installations, power generation equipment and all hazardous locations.
  • 2WPS GENERAL PURPOSE AND ADJUSTABLE DEADBAND PRESSURE SWITCH

    • General Purpose, watertight pressure switch
    • Low pressure to 4,000 psi
    • High current ratings for 1 x SPDT or 2 x SPDT switches
    • Fixed or adjustable deadband options
    • Die cast aluminum construction with welded seal
    • 1% accuracy
    • NEMA 4, 4X & IP66 rated
    • cRU recognized (switch only)
    • CRN registration pending
    • 5 year warranty
    Suitable for pump and compressor monitoring, HVAC systems and general industrial
    applications.
      Download Product Overview Catalog Download Electronics Product Catalog
  • PPC PROCESS PRESSURE GAUGE

    Solid phenolic front and polypropylene pressure relief back safety case Field liquid-fillable (bottom connection only) ±0.5% accuracy Stainless steel full rotary movement for longer life Micrometer adjustable pointer for ease in calibration Under and overload stops 316L stainless steel, brass or Monel® wetted parts Restricted orifice standard on dual scale (optional on single scale) ASME B40.100 compliant RoHS compliant (SS and Monel® internals only) CRN registered 5 year warranty  
    Used where operator safety is a must, Ideally suited for process, chemical and petroleum industries, Highly corrosive media.
  • isoil_logo_200_85 The MS 2500 flanged sensor are well suited for all application and flow ranges. The MS2500 is available in the widest range of diameters. Features; • Accuracy to +/-0.2% of rate from 1 to 33 ft/sec. • Nineteen sizes from 1" to 48" Pipe Diameters. • Flow ranges from 2.37 to 179,400 GPM. • Pressures to 5600 PSI. • Volumetric flow rate measurement independent of fluid viscosity, density and temperature. • No moving parts for zero maintenance. • Bi-directional flow measurement. • No pressure drop through sensor. • Optional Integral ground electrode eliminates grounding rings with plastic piping systems. • Minimal straight pipe run required. • Every sensor is factory wet-calibrated.
  • COVID-19 and VTScada Remote Interactive Training

    For the safety of our customers and staff, we have canceled all in-person training courses until further notice. To ensure access to the training, we are pleased to offer Remote Interactive Training Courses. These are the same as in-person courses, except the instructor is on your screen instead of in the room. See a list of available courses below. A Remote Interactive Training Course includes:
    • A live instructor, not a recording.
    • Interaction with the instructor, just like they were in the room; ask questions whenever you want.
    • The opportunity for one-on-one instruction in the form of breakout rooms during the course. 
    • If you get stuck, you can share your screen with the instructor without worrying about who else is watching. The instructor can even take control for a few minutes to help guide you back on track.
    • At the end of the course, you’ll have access to a recording of the entire session. Review any bits that you missed or need a refresher on. (Breakout rooms and one-on-one sessions are not recorded.)
    • The pace, timing, material, and exercises are all the same as if you were present in a classroom.

    Upcoming Training Courses

    Courses listed below will be updated on demand.  

    Courses listed below will be updated on demand. 

    DATES COURSE TYPE LOCATION STATUS
    Sep 21 – Sep 24, 2020 Advanced Configuration Remote Interactive Training Open Please call 905-760-9399 to register
    Dec 7 – Dec 10, 2020 Operation & Configuration Remote Interactive Training Open Please call 905-760-9399 to register
       

    Courses Descriptions and Materials

    LEVEL I – Operation & Configuration Course

    Operators and developers will learn about the many features of the VTScada monitoring and control software by creating a working, full-featured application from start to finish. This course will explain how to use the native display screens, connect to hardware, build new displays, work with alarms, configure security and much more.  

    LEVEL 2 – Advanced Configuration

      Experienced VTScada developers will learn advanced configuration techniques that allow them to go beyond the standard tools for building their applications. Knowledge of the topics covered in the Operation and Configuration course is recommended for anyone considering this advanced course.

    Request a Course at Your Location

    Contact Larry McLean to request an onsite customized training course.

    Student Course Requirements

     

    For In-Class Courses

    • A Windows 10® laptop is required. Let us know if you need us to provide one – numbers are limited. See the OS & PC requirements.
    • Travel and lodging arrangements are the responsibility of attendees.
    • Spaces are limited, so please respond as soon as possible.

    For Remote Interactive Training Courses

    • A computer, on which you can install and run VTScada.
    • A reasonably fast internet connection.
    • A workspace where you can focus on the course.
    • A working webcam. (Usually built into your laptop or tablet.) This will make you part of the class, not just a disembodied connection in a list.
    • Headphones or a headset. These are not needed if you’re in a quiet space, or away from co-workers who don’t want to listen to the course broadcast from your computer speakers.
    • A working microphone, either as part of your computer, headset, or webcam.
    • Optional:  A second screen, whether that’s a second monitor, a second laptop or a tablet. This allows you to have the course workbook file and the Remote Interactive Training session open on one screen while doing your exercises on another.
    • If co-workers are attending the class with you, consider using a projector and sharing one set of speakers and a microphone, rather than having everyone run a separate copy of the virtual classroom. This will avoid audio feedback and reduce the load on your network connection. A webcam pointing back at the group is recommended.
    • Ensure that any Bluetooth devices you are using are fully charged.

    Continuing Education Credits

    VTSCADA Operation & Configuration Course is approved for Continuing Ed Credits in the states of Florida, South Carolina, Louisiana, Tennessee, as well as the provinces of Nova Scotia, New Brunswick, Newfoundland & Labrador, and Prince Edward Island.

    Video Tutorials

    Get started using VTScada by checking out Video Tutorials.

    More Information

    • Larry McLean: Email or phone: 866.342.5222 Ext. 236
  • fluidwell_200_85 The F490 is a versatile, loop powered Multi Purpose Indicator which displays the actual process value, range and loop current. Besides the focus on level, temperature and pressure applications, the F490 can also work with other measuring units, such as %, mA, RPM and more. Therefore, the F490 is a versatile indicator that suits many applications. At the F490, the input circuit is separated from the backlight circuit. It is designed in such way that it does not influence the intrinsically safe circuit to which it is connected. The F490 accepts 4 - 20mA input signals from a wide range of process instruments, including flow (linear or square root), level, pressure and temperature transmitters. All these process parameters can be displayed in their own engineering units. Thanks to its ruggedness, the F490 withstands extreme weather conditions such as rain, snow, sun, sandy deserts, salty atmospheres and temperatures between -40°C/-40°F and +80°C/+178°F without the need for expensive protective cabinets. Moreover, all products in the F-series are robust by design: even a truck can stand on them.

    Hazardous area information

    The F490 is certified according ATEX, IECEx and CSA for use in Intrinsically Safe applications with an ambient temperature of -40°C to +70°C (-40°F to +158°F). ATEX markings: Gas: II 1 G Ex ia IIC T4 Ga Dust: II 1 D Ex ia IIIC T100°C Da IECEx markings: Gas: Ex ia IIC T4 Ga Dust: Ex ia IIIC T100°C Da CSA c-us markings: IS Class I/II/III, Division 1, Groups A to G. Ex ia IIC / Class 1 Zone 0 AEx ia IIC T4.  
  • Instantly Intuitive HMI and SCADA Software

    VTScada provides you with a refreshingly intuitive platform for creating highly-customized industrial monitoring and control applications that end users can trust and use with ease. A wide variety of industries around the world use VTScada for mission-critical applications of every size.

    More than HMI and SCADA Software

    VTScada also natively includes components not commonly found in HMI or SCADA software platforms such as polling management, historian, trends viewer, report generation, application version control, alarm notification, and system backup. You install everything at once in just a few minutes.

    Fully Integrated SCADA Features

    VTScada uses a unique architecture that integrates all core HMI SCADA software features into a single, easy-to-use package. This includes optional components which can be unlocked by simply updating the VTScada software license key. In addition to reducing development time, this ensures that critical SCADA software features like Alarm Notification remains tightly integrated over the entire life of your system. VTScada allows you to easily grow from a few hundred tags on a single laptop all the way up to a multi-million tag system spanning distributed synchronized servers. VTScada Datasheet
  • Precision Digital Precision Digital's ConsoliDator+ is a multi-channel controller that is both easy to use and satisfies a wide variety of process display, alarm and control applications. It accepts 4-20 mA inputs, flow meter pulse inputs, digital inputs, and Modbus RTU inputs and displays them both in numeric and bargraph format on a large, 5.7" color display. It can be equipped with multiple relays with user-definable actions, 4-20 mA outputs, digital outputs, Modbus RTU, and Ethernet Modbus TCP/IP protocol communication capabilities. Additionally, the controller is equipped with up to 32 timers that can be used to control many processes or events. All this functionality is easily programmed using free software or via the front panel pushbuttons. Choose the model that best suits your application, from monitoring only to fully loaded controllers with an extensive combination of inputs, outputs and communication protocols. The standard product offering is listed in the ordering guide and other models are available for special order.  

    Features

    • NEMA 4X Panel or Field Mount Multi-Channel Controller
    • Convenient Display, Control, & Alarm of Multiple 4-20 mA & Pulse Inputs
    • Numeric & Bargraph Color Display (320 x 240 pixels) 5.7" (145 mm)
    • Sunlight Readable Display, White Backlight
    • Isolated 24 VDC Transmitter Supplies 200 mA / Analog Input; 1,600 mA Max
    • 99 Channels, 32 Totalizers, 32 Timers, & 199 Modbus Slave Inputs
    • 64 High & Low Alarms assigned to up to 25 Relays with AND/OR Logic
    • Modular Design for Input & Output Flexibility
    • Up to (28) 4-20 mA Isolated Inputs or Pulse Inputs
    • Up to (25) 10 Amp Form C Relays (With Eight Analog or Pulse Inputs)
    • Up to (25) Isolated 4-20 mA Outputs (With Eight Analog or Pulse Inputs)
    • Pulse, Analog, & Modbus Input Flow Rate / Total / Grand Total Capability
    • 50-Point Linearization, Square Root, and Exponent for Open Channel Flow
    • Round Horizontal Tank Volume Calculation; Just Enter Diameter & Length
    • Multi-Pump Alternation Control or Simple On / Off Control
    • Programmable Displays, Function Keys & Digital Inputs
    • Math Functions: Sum, Diff, Average, Multiply, Divide, % Efficiency, & More
    • Display Direct Modbus PV Inputs – Slave Mode
    • RS-485 Modbus RTU Standard & Ethernet Modbus TCP/IP Optional
    • Free ConsoliDator+ Configuration Software
  • isoil_logo_200_85 The MV110 converter is mainly designed for application in water and HVAC markets or in other industrial markets where basic measurement requirements or output protocols are needed. Accuracy: ± 0,8% of the read value (on request ± 0,4% of the read value). Repeatability: ± 0,2% Programming through key pad on front plate or via PC connected through mini USB cable adapter Flexible mounting so that display can be seen from the top or form the front Galvanic separation: all inputs and outputs are separated one each other and with the power supply. Housing material: Nylon reinforced with 15% of fiber glass, or Aluminum Protection rate: IP 67 (on request IP68) Available functions: low flow rate cut-off, bidirectional measurement, peak cut-off, empty pipe detection, alarm limit etc. Available accessories: rechargeable backup battery (assures the measurement in case of power loss), 4 GB data logger, built-in Verificator (BIV) for electric characteristic of the sensor. It can be used in combination with any flanged or wafer Isomag® flow sensor.
  •  

    ProPulse Series All Plastic Mini Turbine Flow Meter

    No Programming Required Excellent Chemical Resistance Perfect for Dosing / Pulsating Flows

    Features:

    • Universal Body 5 Different Flow Ranges(Flow Jets Are Field Replaceable)
    • Excellent Chemical Resistance
    • All Plastic PVDF Body, Rotor, Sapphire Bearings
    • Ultra Low Flow Ranges from 50 ml/min (.013 GPM)
    • Pressure Rating 10 bar (150 psi)
    • Pulse Output Hall Effect Sensor which converts the rotation into a square wave NPN pulse output
    • Compact - Lightweight
    • Temperature Rating -40 -120°C (-40 -248°F)
    • Barbed Hose Inlet/Outlet Connection   5/16 and 1/2 inch. 8mm, 12mm, or 3/8” Pipe Connector
    • High Accuracy & Repeatability
    • NPN Frequency Pulse Output
  •  

    UltraFlo5000 Series PVDF-PE Ultrasonic Flow Meter

    Measures Continuous / Dosing / Pulsating Flow All Plastic Ultrasonic Measurement Technolog

    Features:

    • ½", ¾", 1"NPT or Threaded Connections
    • Heavy Duty Design; Simple to Install
    • Completely Corrosion Resistant
    • Negligible Pressure Drop
    • Empty Pipe Alarm
    • Measuring Range
      • 1/2"   0.3 to 21  LPM / 0.8 to 5.5 GPM
      • 3/4"   0.9 to 36 LPM / 0.24 to 9.5 GPM
      • 1"     3.5 to 60 LPM / 0.92 to 15.8 GPM
    • Maximum Pressure
      • 1/2"   7 bar / 100 psi
      • 3/4"   7 bar / 100 psi
      • 1"     7 bar / 100 psi
    • Temperature Range -10 to 100C / -14 to 176F
    • Outputs 4-20mA  + Qty 1 Digital Pulse output or empty pipe alarm
    • Input  1 Digital usable for dosing start or zero offset
    • Communication  RS-485 (2 wire)
    • Power Supply 24Vdc / 3.6 W
    • Display Flow Rate + Totalizer
    • IP67 Enclosure NEMA 4X
    • Housing Material PE (Polyethylene) / PVDF (Polyvinylidenfluoride)
  •  

    UltraFlo4000 Series All Plastic Ultrasonic Flow Meter

    All Plastic Ultrasonic Flow Meter Measures Continuous / Dosing / Pulsating Flow Ultrasonic Measurement No Moving Parts Ultra Low Flow Applications

    Features:

    • No Moving Parts
    • PVC-CPVC True Union Ends (Option)
    • Heavy Duty Design; Simple to Install
    • Completely Corrosion Resistant
    • Measuring Range
      • 1/2"   0.3 to 21  LPM / 0.8 to 5.5 GPM
      • 3/4"   0.9 to 36 LPM / 0.24 to 9.5 GPM
      • 1"     3.5 to 60 LPM / 0.92 to 15.8 GPM
      • 1 1/4 5.0 to 240 LPM / 1.32 to 63 GPM
    • Maximum Pressure
      • 1/2"   16 bar / 232 psi
      • 3/4"   16 bar / 232 psi
      • 1"     10 bar / 145 psi
      • 1 1/4 10 bar / 145 psi
    • Temperature Range -10 to 80C / -14to 176F
    • Outputs 4-20mA  + Qty 1 Digital Pulse output or empty pipe alarm
    • Input  1 Digital usable for dosing start or zero offset
    • Communication  Data interface  (1 wire) alternative RS-485 (2 wire)
    • Power Supply 24Vdc / 3.6 W
    • Display Flow Rate + Totalizer
    • IP67 Enclosure NEMA 4X
    • Negligible Pressure Drop
    • Empty Pipe Alarm
    • Polysulfone Body Material
  •  

    UltraFlo1000 Series PFA Plastic – All Teflon Ultrasonic Flow Meter

    PFA :
    All Teflon Ultrasonic Flow Meter
    Measures Continuous / Dosing / Pulsating Flow
    All Plastic Ultrasonic Measurement Technology
    Excellent Corrosion Resistance
    High Purity Applications

    Features:

    • Flared Tubing Ends
    • Blind Display
    • Heavy Duty Design; Simple to Install
    • Completely Corrosion Resistant
    • Light Weight
    • Measuring Range (l/m)
      • 3/8"  0.02 to 0.09
      • 1/2"  0.3  to 24
      • 3/4"  0.9 to 60
      • 1"    1.2 to 120
    • Outputs 4-20mA  + Qty 2 Digital outputs , configurable as Pulse and/or alarm output
    • Input  1 Digital usable for dosing start or zero offset
    • Communication Data Interface  (1 wire) alternative RS-485 (2 wire)
    • Power Supply 24Vdc / 3.6 W
    • Low Flow Rates-.02 LPM-0.005 GPM
    • Suitable for Ultra Pure Applications
    • IP65 Enclosure
    • Negligible Pressure Drop
    • Empty Pipe Alarm
    • Ultrapure Flow Design
  •  

    TKW FLOW METER Paddle Wheel Flow Meter - Blind Display

    Features:

    • No Programming Required
    • SDR11 PP Butt Weld or NPT Thread, CPVC, PE 100 RC Ends
    • High Accuracy Less than ± 1.0% of Full Scale
    • NPN Pulse+ 4-20mA Output
    • Corrosion Resistant Materials PVC/PP/316SS
    • Low Cost Visual Indication
    • Easy Installation-No Mounting Kits
    • Compact Design • Horizontal or Vertical Installation
    • Size Range ½”- 4” (PVC, PP)
    • Low Pressure Drop
    • NEMA 4X Enclosure
    • Suitable for Corrosive Environments
    • True- Union Design ½” - 2” (Flanged 3”- 4”)
    • Light Weight
  •  

    LSS Series PP Body Plastic Paddle Wheel Flow Meter

    Features:

    • Up to 24" Pipe Size
      • Zirconium Ceramic Rotor / Bearings
      • Accuracy ±0.75% of Full Scale
      • Retrofits Into Signet® Type Fittings
    • Large Display Changes from Green to Red when in Alarm State
    • Accuracy ± 0.75% Of Full Scale
    • Pipe Size (1/2 -24 Inch)
    • Heavy Duty Industrial Design
    • Sensor Body Material Natural PVDF / PP
    • Rotor Material PFA Teflon
    • Shaft and Bearing Material Zirconium  Ceramic (Zr02)
    • Display Housing Material Polymide 66 +PBT + 15% Glass Filled (UL94V-0)
    • Flow Rate + Totalizer (Resettable)
    • Memory Mode Non-Volatile EPROM
    • Flow Velocity Range (0.33 to 26 Ft/S) (0.1 To 8 M/S)
    • Measuring Viscosity Range 0.5 to 20 cts
    • Maximum Particle Size  <0.5mm2 (Max particle size)
    • Maximum Operating Pressure 200psig at -30C
    • Maximum Temperature 36 psi at 90C
    • Eprom Memory-Totalizer Value Will Not Be Lost
    • Nema 4X (IP66) Protection • Bright LED Display Flow Units-- Litre, USGPM, M3, Ton
    • 4-20mA + Two (7) Amp Relays Output (Standard)
    • Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
    • Pulse Output Transistor NPN Open-collector (Max. DC 60V/100ma)
    • Supply Voltage 14 to 28Vdc
    • Communication  RS-485 Modbus RTU Mode
    • Protection Class IP65/ NEMA 4X
    • Corrosion Resistant All Plastic Wetted Parts-PVDF/PP Body Zirconium Ceramic Shaft-PFA Teflon Paddle
    • Simple Installation
  •  

    TKS/TKP/TKM Series PVC + PP Paddle Wheel Flow Meter

    Features:

    • High Accuracy ± 1.0% of Full Scale • Selectable Unit of Flow Measurement  (Liter/Gallon) • Corrosion Resistant Materials PVC/PP • Low Cost Visual Indication • Easy Installation – No Mounting Kits • High Flow Range (.3m/s - 10m/s ) (.98 ft/s - 32.8 ft/s) • No K Factor Programming • Large Bright LED Digital Display • Horizontal or Vertical Installation • Size Range 1/2” – 4” • Low Pressure Drop • (4-20 mA) + (Pulse) +1 Amp Relay Output Signal • NEMA 4X Enclosure • Suitable for Corrosive Environments • Password Protected Security • True - Union Design ½” - 2” (Flanged 3” - 4”) • M12 Quick Disconnect (15ft Cable Included)
  •  

    Canary Lab's Alarms

    Use TopView® to monitor your process and automation data. Generate audible alarms, send e-mail notification, SMS/text notification, voice notification and SNMP traps.

    Features:

    • Monitor ... Access to values, alarms, and alarm history
    • Notify ... Robust notification engine supporting a wide variety of devices
    • Analyze ... Built-in alarm reports can be scheduled and emailed
    • Scalable ... Monitor 100 tags or 100,000 tags
  •  

    Canary Lab's Reports

    Pull your data into Excel using our Excel Add-In. You can retrieve raw or processed data that can be used to generate reports, analyze data, and make business decisions.

    Features:

    • Ribbon ... Use buttons in the ribbon to open dialogs that will build or modify your calls to our Historian
    • Connection ... Connect to remote Historians, or connect using credentials if security is turned on
    • Raw Data ... Retrieve raw data from the historian. Choose display options for the data
    • Processed Data ... Retrieve processed data from the historian. There are a number of aggregates that can be used
  •  

    Canary Lab's Axiom

    Maximize your data historian by analyzing process data in the most advanced trending software available. Innovative, easy to use, and feature rich, Axiom will transform your ability to trend process data and gather knowledge from your data historian.

    Features:

    • Ad Hoc Trends ... Add or remove trends quickly using our browse dialog to pick which trends you want to view
    • Calculated Trends ... Use standard calculator operations to add a calculated trend based on one or more trends
    • Link Scales/Bands ... Link scales of two or more trends so their data is displayed between the same ranges. Link bands to overlap trends
    • Limit Lines ... Set limit lines for a trend. Use limits to draw a horizontal line across the screen, to fill in space between a limit and the trend, or to change the color of the trend
    • Value Cursor ... Use your cursor to hover over the chart and view the values as you move your mouse
    • Zoom ... Quickly zoom in on a range of data to examine it more closely
  •  

    Canary Lab's Data Historian

    Our process data historian writes and retrieves historical data with industry leading speed. It can store millions of tags accurately and reliably without any data management.

    Features:

    • Scalable ... capable of storing data for millions of tags
    • Fast Read/Write ... Writes up to 4,000,000 points per second
    • Data Handling ... Handles sub second data down to 100 nanoseconds
    • Data Integrity ... Lossless compression algorithms are used
    • Data Accessibility ... OPC, HDA, and ODBC compatible. We also have an API
    • Custom Views ... Custom hierarchical models of the data can be created
    • Easy Administration ... Easy data management without a database administrator
    • Limitless Storage ... No need to purge or optimize the database
    • Tag Security ... Tag security so you have complete control of data access
  • isoil_logo_200_85 FMS Series electromagnetic flow meter easily connects too many common controllers. Economical small-diameter flow sensors for reliable full-pipe flow measurement with low-cost and fast installation. FMS05 / FMS10 / FMS20 FEATURES • Accuracy to +/-2.0% • Flows from 0.5 to 951 GPH • Pressures to 145 PSI • Fluid temperatures to 140 F • Compatible with pulsating flows • Easy to install union end connections • Outputs: Pulse, Error, Alarm.
  • isoil_logo_200_85 The MS1000 Magnetic Flow Meter Features • Accuracy to +/-0.2% • Lower cost than flanged units. • Twelve sizes from 1/2" to 16" Pipe Diameters. • Flow ranges from 0.85 to 19,934 GPM. • Standard Pressure: 230 PSI. • Volumetric flow rate measurement independent of fluid viscosity, density and temperature. • No moving parts for zero maintenance. • Bi-directional flow measurement. • No pressure drop through sensor. • Optional Integral ground electrode eliminates grounding rings with plastic piping systems. • Minimal straight pipe run required. • Every sensor is factory wet-calibrated.
  •   moore_logo_200_85 The UL Approved ECT-DIN 2-Wire Isolator is now available in a narrow 15mm aluminum housing. The thinner ECT-DIN 2-Wire Isolator with 15mm width retains the same General and Hazardous area approvals as the rest of the ECT family of isolators. It also has the same RFI/EMI protection and -40°C to 85°C operating temperature range. The ECT-DIN 2-Wire Isolator can be installed in hazardous locations and does not require installation in climate-controlled environments, making it perfect for more extreme locations. The rugged narrow 15mm ECT DIN 2-Wire isolator and converter with 4-20mA, 1-5V and 0-10V inputs and 4-20mA output, permits more isolators to fit in cabinets and field enclosures where installation space is limited, saving space and money.”  The ECT DIN 15mm narrow size allows more isolators to fit in cabinets and field enclosures where installation space is a premium. This is ideal for utilizing existing field mounted cabinets. The solid metal housing stands up to the continuous, daily rigors of process control and factory automation applications. An optional externally-mounted flange provides a secure mount, which ensures secure installation in high vibration environments. The ECT is UL approved Class I, Division 2, Groups A, B, C & D T4. The rugged and reliable ECT family of isolators provides versatile choices to match the type of AC or DC power available at each location. ECT-DIN 2-wire Output-Loop powered models, ECT 2-wire Input-Loop powered models, or 4-wire (Line/Mains) Powered Isolators/Converters and Splitters are also available. The complete ECT family delivers reliable signal isolation and conversion solutions for the most demanding ambient and noisy installation conditions.     Download Data Sheet
  • etherm_logo_200_85
    eltherms’ Clean Laser Seal technology takes Mineral Insulated (MI) Trace Heater assemblies to the next level.
    Manufactured and assembled entirely from high quality stainless steel or Alloy 825, eltherm‘s revolutionary Clean Laser Seal Technology (CLS) guarantees performance and reliability in all industrial operations.
    CLS offers today‘s best possible protection from stress corrosion cracking in applications in which aggressive chemicals may be present.
    Stainless steel and Alloy 825 is the material of choice for temperature process control and ideally suited for freeze protection or viscosity control applications subject to periodic high temperature exposure.
    Our proprietary clean laser sealing process provides a 100% stable, homogeneous system, resulting in a reliable and maintenance-free assembly.
     

    Features:

    • Factory terminated laser sealed technology
    • All components in high quality stainless steel or Alloy 825
    • High temperature resistance
    • High chemical resistance
    • High power output
    • Flexible single or twin conductor configurations
    • Moisture proof, may be immersed in fluid

    Applications in Detail: 

    • Freeze/viscosity protection in industrial processes
    • Process temperature maintain
    • Vendor skids and process modules (cookie cutter custom units)
    • Heat tracing of instrumentation and sample stations
    • Vessel and trim tracing
    • High temperature exposure
    • Aseptic manufacturing conditions
    • High watt density requirements
    • Vacuum Processes
    • Heat Treating Processes
    • Heat tracing on instrumentation
  • etherm_logo_200_85 Heated pressure hoses serve to heat media, maintain a constant temperature and transport media such as the following without heat loss: oil, grease, wax, resin, tar, paint, water, glue, plastic, casting compound, food, etc. The heated hose is mounted on movable system and machine parts in most cases. Temperature ranges: up to 250 °C standard. Advantages:
    • Operating temperature: 5 °C to 250 °C as standard
    • Nominal widths: 4 mm to 25 mm as standard
    • Voltages: 12 V to 400 V
    • Operating pressures: up to 500 bar
    • Heat output optimised for application
    • Heating cables produced in-house
    • Available for the automotive industry as silicone free / LABS-free version
      All heated hoses made by eltherm are deigned and produced specifically according to customer specification including actual lay length.
  • isoil_logo_200_85 Compact flow meter which integrates in a the same body the sensor and the converter Sensor body in galvanized zinc steel PTFE coated with SS electrodes. Available sizes DN10 – DN 15 and DN20 Threaded process connections Configuration via PC Pulse and Analogue outputs Capability to measure the process temperature Suitable for flow control where flow might need to be controlled according to the temperature such as cooling systems on tooling machines, washing systems etc. Please refer to the enclosed documentation for further information.
  • pepperl_fuches_200_85
    What characterizes milestones in technical development? These milestones make the impossible possible! Complex obstacles are overcome while freedom and flexibility increase. All these characteristics apply to THE BARRIER from Pepperl+Fuchs. This new product represents a big step forward for process automation.
    This ground-breaking device replaces several traditional modules with a single multi-functional I/O module. Pepperl+Fuchs is the only company providing flexible isolated barriers corresponding to universal input cards of control systems. As an addition to Pepperl+Fuchs’ proven H-System, THE BARRIER is an innovation which especially impacts distributed control system (DCS) manufacturers. To achieve its full functionality, the Universal Barrier only needs an input card with the appropriate flexibility.

    Benefits:

    • One barrier for all signal types
    • Self-adjusting, no settings necessary
    • Flexibility of the barrier improves project performance
    • Short-term changes are possible without any delays
    • Quick, easy, and trouble-free installation
    • Pre-assembled solutions accelerate project implementation
    • Standardized cabinets are possible, low error rate and planning effort
    • On-progress migration without unnecessary downtime or production loss
    • Reduced maintenance effort and easier storage by reduced part diversity
  • joglor_logo_200_85 JMG Magnetic Level Gauges are a safe, economical way to measure and control level through a wide range of process pressures, temperatures, and fluids. Each component of the JMG (chamber, float, and indicator) has been engineered to improve on existing designs to ensure reliable, maintenance-free operation right out of the crate. The JMG can be coupled with an MGT magnetostrictive level transmitter and/or any Jogler level switch to provide control outputs configured to specific customer needs.  

    Features:

    • Wide range of materials (316/304SS, Hastelloy C, Inconel, Titanium, CPVC, others)
    • ASME B31.3/B31.1 standard design
    • ASME compliant extruded outlets available (Stainless Steel or Hastelloy only)
    • Process pressures from full vacuum to 5000 psig
    • Process temperatures from -320 to 1000F
    • Fluid SG as low as 0.25
    • Interface fluid DeltaSG as low as 0.025
    • Measuring Lengths up to 50 ft
    • Custom configurable chamber/process connection designs
    • ASME Section XI welding
    • ASME Code U and S stamped (optional)
    • PED compliance (optional)
    • Dual Chamber or Top Mount designs available (see data sheet)
  • pepperl_fuches_200_85 The 7500 series system consists of a control unit, an enclosure protection vent, and manual or automatic manifold. The control unit has a touch screen display that is menu driven and will easily guide the user in selecting pre-programmed and user-selected variables. The 7500 can be used with a digital valve/manifold system like the 5500-MAN-... unit to make a fully automatic system. The enclosure pressure and leakage can be monitored and, in the event of a loss in enclosure pressure, the solenoid valve can engage to restore the defined pressure settings and/or alarm for the pressure drop. An easy-to-see display also has 4 LEDs for system condition indication from a distance.

    Features:

    • Low cost, compact design, easy to use
    • Universal power: AC or DC
    • Touch screen display with LEDs for easy visual indication
    • Easy setup with pre-set purge programs for your application
    • Automatic pressure compensation with digital manifold
    • Rugged, corrosion-resistant housing
    • Global third-party approvals for Class I, II, Div. 2 and Zone 2/22
  • pepperl_fuches_200_85
    The SK-PC-Z1D1-UU1-10-HS USB intrinsic safety barrier enables a host device (i.e., an industrial PC) that is in a Zone 2 environment to be connected to an EXTA2/EXTA3 keyboard or similar USB device in a Zone 1/21 environment.
    The barrier enables operation of input devices, such as PC keyboards and trackballs, within Zone 1/21 and 2/22 hazardous areas. To transmit USB signals from and into hazardous areas, it converts the two USB channels into intrinsically safe circuits.
    The device is IP20 rated. It must be protected accordingly from adverse conditions, such as water spray or dirt, that exceed the conditions of pollution degree 2.
    As an associated apparatus, the SK-PC-Z1D1-UU1-10-HS barrier is certified to lead intrinsically safe circuits into Zone 1/21 hazardous areas. It is a one-to-one data connector. Data is passed through without buffering. The SK-PC-Z1D1-UU1-10-HS barrier does not provide galvanic insulation.
    • Highest quality thermometers available on the market
    • Easy to calibrate with 1/16" Allen key
    • Corrosion-resistant 304 Stainless Steel case and bezel provide a hermetic seal to prevent lens fogging and moisture damage
    • Single °F, single °C, and dual scale options available
    • Accuracy: ±1% full scale, Grade A, ASME B40.3
    • 2", 3" and 5" sizes - center back and bottom connections
    • 2" Dial Size - 1/4" NPT; 3" & 5 " Dial Sizes - 1/2" NPT
    • Standard stem lengths 2-1/2" through 42"
    • Minimum or maximum indicating pointers are available in 3" and 5" sizes
    • Highly sensitive bimetallic helix coil is heat-treated for stress relief, and silicone-coated to minimize pointer vibration and maximize heat transfer and response time
    • 360° groove around stem is a visual reference to show minimum immersion point
    • Made in the U.S.A.
     
  • noshoklogforproductpage
    The NOSHOK 822/823 Series Battery-Powered Digital Temperature Indicators are a complete solution for most industrial temperature monitoring and temperature indicating applications.Made with high quality construction, these indicators feature a large 4-digit LCD display. They are designed for optimum accuracy and performance. NOSHOK 822/823 Series Indicators are an ideal replacement for bi-metal, liquid bulb and gas thermometers. They are also a suit-able replacement for Mercury reduction programs.
     
    The NOSHOK 822/823 Series Battery-Powered Digital Temperature Indicator arrives factory calibrated to the customer’s specified temperature range. No costly field calibration is required.
    The housing, probe and fitting material is all fabricated from 316 stainless steel.
     
    The 822/823 Series Indicator is rated to NEMA 4X (IP66). Many mounting configurations are available to meet customer requirements.
     
    The 822/823 Series Indicator has a five year battery life with a low battery indication on the LCD.
     

Title

Go to Top