Conoflow's GFH45 Series Airpak® Filter-Regulators are widely used to provide clean, regulated air pressure to instruments and controls,
automatic machinery and other pneumatic devices.
-
Conoflow's FR95 Series Airpak®, Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers and other pneumatic control devices. This units design provides high flow capability, durable materials of construction and bubble tight shut-off. -
140K Diaphragm Seals for Threaded Off-Line Process Connections All welded - Gasketless Design Process Connection Sizes 1/4inch NPTF or 1/2 inch NPTF Maximum Working Pressure 2000 PSIG (13.80Mpa) @ 100F (38C) Standard 5000 Psig (34.50Mpa) @ 100ºF (38ºC Optional)Download Datasheet
-
Exceptional self-priming capabilities make the 2001HK Series an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers.
A wide range of flow outputs can be obtained by simply changing the tubing size. One size pumphead accepts six standard tubing sizes. The sealed, spring-loaded pumphead rollers provide extended tubing life and automatically compensate for minor variations in pump tube wall thickness.
The 2001HK Series pump system also allows you to mount the controller on the wall, away from the harsh environment.
All 2001 Series pumps feature a unique sealed peristaltic pumphead, with optional leak detection, which protects against corrosive and dangerous chemical spills.
Features:
- Flows to 51.4 GPH, Pressures to 100 psi.*
- Rugged industrial drive uses NEMA TEFC motors
- Seal-less pumping technology
- Self-priming – suction lifts to 30 ft.
- No check valves – few moving parts
- Compact or Remote wall-mount K4 Series Digital AC Variable Frequency Drive with LED digital display & integral keypad
- Dry run capability
- User selectable manual or automatic control
- Various long life chemical resistant tubing options available
- Automatic control available via 0-10VDC or 4-20mA
-
The F110 flow transmitter is the most popular model in our range of flow rate indicators / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration.The display shows flow rate, total and accumulated total. On-screen engineering units are easily configured from a comprehensive selection.Advantages
- Robust IP66, IP67 (NEMA Type4X) field enclosure. It is so rugged, you can even stand on it!
- Intrinsically Safe available - ATEX and IECEx approval for gas and dust applications
- Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
- Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors
Features
- Analog and pulse outputs
- Displays total and flow rate simultaneously
- Large digit selection for flow rate or total
- Flow rate: seven 17mm (0.67") or 8mm (0.31") digits
- Total - resettable: seven 17mm (0.67") digits
- Accumulated total - not resettable: eleven 8mm (0.31") digits
- Separate engineering units for flow rate and total on the display
- Remote control input to reset total or to lock the "clear total" button
- LED backlight
- Auto backup of settings and running totals in EEPROM memory
- Ambient temperature: -40°C to +80°C (-40°F to 176°F)
- Various accessories are available for this product
- The F-Series is so rugged, even a truck can stand on it!
Applications
- The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).
- Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required. Alternative basic model: F070. Alternative basic models: F010, F011, F012, F014. Alternative advanced models: F112, F113, F118 or the D-Series basic DIN panel mount indicators.
-
The MV110 converter is mainly designed for application in water and HVAC markets or in other industrial markets where basic measurement requirements or output protocols are needed. Accuracy: ± 0,8% of the read value (on request ± 0,4% of the read value). Repeatability: ± 0,2% Programming through key pad on front plate or via PC connected through mini USB cable adapter Flexible mounting so that display can be seen from the top or form the front Galvanic separation: all inputs and outputs are separated one each other and with the power supply. Housing material: Nylon reinforced with 15% of fiber glass, or Aluminum Protection rate: IP 67 (on request IP68) Available functions: low flow rate cut-off, bidirectional measurement, peak cut-off, empty pipe detection, alarm limit etc. Available accessories: rechargeable backup battery (assures the measurement in case of power loss), 4 GB data logger, built-in Verificator (BIV) for electric characteristic of the sensor. It can be used in combination with any flanged or wafer Isomag® flow sensor. -
The JP-450 is a magnetically actuated “no bleed” pneumatic point level switch for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps the switch isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly. Two JP-450’s can be coupled with a JPLR latching relay to give plug-and-play dump/fill valve control.
Features:
- No process piping or valves required (except customer pneumatic lines)
- Retrofit onto existing MLG installations
- “Snap-action” design maintains state in high-vibration environments
- Accepts filtered air or gas supply
- Field configurable (High/Low level)
- 316 Stainless Steel enclosure
-
The JS-10 (1 amp) and JS-30 (3 amp) switches are magnetically actuated point level switches for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps these switches isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly.
Features:
- No process piping or valves required
- Retrofit onto existing MLG installations
- Internal bias magnet maintains state in high-vibration environments
- Available in SPDT (one internal switch) or DPDT (two internal switches)
- Available with flying leads (no enclosure), Epoxy-coated Aluminum enclosure, or 316 Stainless Steel Enclosure
- Class I, Division 1, Groups B, C, D
- Class I, Division 2, Groups ABCD
- Class II and Class III, Groups EFG
- ATEX and IEC ratings (pending)
- Maintenance-free
-
Truflo GI Series Gauge Isolators allow inexpensive pressure gauges, or any other pressure instrument to be used in corrosive services. The upper chamber (gauge side)is filled with a stable fluid such as glycerin or silicone. A Teflon® diaphragm separates it from the lower chamber which receives the media under pressure. Customers can easily fill isolators and install their own gauges.
Features:
- Easy to Mount Gauges
- No Special Equipment is Required
- Perfect Mate for Truflo OBS Plastic Gauges
- Provision for Fill Port
- Housing has a Threaded Vacuum Port for Extracting any Trapped Air during the filling process
- High Chemical Resistance
- Choice of Body Materials for a Wide Range of Applications
- PTFE bonded FPM dished diaphragm for High Chemical Resistance and Sensitivity
- Heavy Duty Design for Safety
- Small Footprint
- Heavy Wall Connection Ports
Specifications:
INLET PROCESS CONNECTION : ½" (M) / (F) NPT / BSP / G / Flange INSTRUMENT CONNECTION : ¼" NPT / G DIAPHRAGM : PTFE Teflon®
-
One Piece Plastic Design Battery Operated > 3 Years Digital Combo Gauge + Isolator
Features:
- All Plastic Gauge & Isolator
- No Filling Required
- Heavy Duty Design / Simple to Install
- Completely Corrosion Resistant
- Extra Large LCD Display
- Reduces Small Pressure Surges caused by
- Water Hammer / Metering Pump Pulsations
- Highest Accuracy in Industry / ±1%
- One-Piece Molded Design / No Assembly
- Suitable for Corrosive Media + Slurries
- No Programing Required
- PTFE Diaphragm / Standard
- Replaceable Lithium Battery
- Long Life > 3 Years
Specifications:
Dial Diameter Large 2½" Face / Big Numbers Mounting Bottom Connection / ½" Housing PP / PVDF / (PTFE Teflon®) Diaphragm Lens One Piece Molded Design / No Assembly Display Liquid Crystal Display - LCD Programming Push-Button / Eprom Non-Volatile Accuracy ±1.0% F.S. Operating Temperature PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Connection ½" (M) / (F) NPT / G Type / Flange Pressure Range* 150 psi / 10 bar) * (Non-Shock)
-
Perfect for Basket Strainer / Bag Filter Notification Excellent Chemical Resistance Relay Output
Features:
- All Plastic Design / Glass Filled Ryton
- Corrosion Resistant
- NEMA 4X Rugged Enclosure
- Liquid Crystal Display
- Pressure Range / 0-225 psi
- Easy to Program Relay Set-Point
- psi or bar Pressure Scale
- Small Footprint / 2" Diameter
- Easy to Install
- Eprom Memory / Retains Set-Point / Criteria
- Low Power Detection Feature
- Actual Pressure Difference Displayed on Screen
- Manual Override Function
- Programmable Time Intervals / Relay Activation
Specifications:
Dry Relay Contact 0.5 AMP at 24VDC (N/O) Output Body Diameter 2" Operating Temperature -20 - 60°C / 4-140°F Supply Power 24VDC Accuracy ±0.5% Maximum Inlet Pressure 225 psi / 5 bar Enclosure NEMA 4X / Ryton PPS
-
Completely Corrosion Resistant Accuracy ±1% 4-20mA + 2 Relay Outputs psi / bar / MPa / Kg/cm2
Features:
- All Plastic / Gauge & Isolator
- Heavy Duty Design / Simple to Install
- Completely Corrosion Resistant
- Green LED changes to Red in Upset Condition
- Extra Large LED Display
- Reduces Pressure Surges
- Simple Push Button Programming
- High Accuracy / ±1.0%
- Visual Notification of Relay Outputs
- No Filling Required
- One-Piece Molded Design / No Assembly
- Suitable for Corrosive Media + Slurries
Specifications:
Dial Diameter Large 2½" Face / Big Numbers Mounting Direct Mount / MNPT / FNPT / ½" Housing PVC / PP / PVDF / PTFE Diaphragm One Piece Molded Design (No Assembly) Lens Polycarbonate Dial LED - Green (Normal) / Red (Relays Active) Connection ½" (M) / (F) NPT / G Type / Flange Accuracy ±1.0% Operating temperature PVC 140°F / CPVC 180°F / PP 170°F / PVDF 195°F Pressure Range* 0-150 psi / 10 bar / (Ambient Temp) *(N0n-Shock) Output 4-20mA + 2 (NPN or PNP) Relay Outputs Power Supply 10-30VDC SPECIFICATIONS