Shop

  •

    330B Diaphragm Seals for Threaded Off-Line Process Connections

    Standard Features:

    • 2" (50.80mm) and Larger
    • Process Connection Sizes 2" through 3" ASME/ANSI  Flange Rating up to 2500lb
    • Maximum Working Pressure Conforms to Flange Pressure-Temperature Ratings  per ASME/ANSI B16.5
    • Flange Faces (125-250Ra Spiral Finish is standard)
    • Raised Face , Flat Face , Ring Type Joint and Special Flange Faces are available
    Download Datasheet
    Details

  • 330A Diaphragm Seals for Threaded Off-Line Process Connections

    Standard Features:

    • Standard Pressure Rating with Metal Lower Housing
    • Process Connection Sizes 1/4 " NPTF through 1 1/2" NPTF
    • Maximum Pressure Rating 1250, 2500 PSIG (8.63, 17.25Mpa) @ 100ºF (38ºC)
    Download Datasheet
    Details

  • 300S Diaphragm Seals for Socket Welded Off-Line Process Connections

    Standard Features:

    • Standard Pressure Rating with Metal Lower 1/4 inches through 1 inch
    • All Pipe Schedules per ASME/ANSI B36.10 or B36.19
    • Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
    Download Datasheet
    Details

  • 300L Diaphragm Seals for Butt Welded In-Line Process Connections

    Standard Features:

    • Standard Pressure Rating with Metal Lower Housing 1/4 inches through 1 inch
    • All Pipe Schedules per ASME/ANSI B36.10 or B36.19
    • Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
    Download Datasheet
    Details

  • 300BX Diaphragm Seals for Flanged Off-Line Process Connections

     

    Standard Features:

    • 1 1/2 inch (25.40mm) through 8 inch
    • ASME/ANSI Flange Ratings up to 2,500lb
    • Maximum Working Pressure Conforms to Flange Pressure-Temperature Rating per ASME/ANSI B16.5
    • Flange Faces  (125-250Ra Spiral Finish is standard)
    • Raised Face, Flat Face , Ring Type Joint and Special Flange Faces are available
    Download Datasheet
    Details

  • 300J3 Diaphragm Seals for Saddle Weld Process Connection

    Standard Features:

    • Standard Pressure Rating with Metal Lower Housing 3 inches and larger
    • All Pipe Schedules per ASME/ANSI B16.10 or B36.19
    • Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
    Download Datasheet
    Details

  • 190K Diaphragm Seals for Threaded Off-Line Process Connections

    All Welded - Gasketless Design

    Standard Features and Options:

    • This threaded connection, off-line seal is an all welded , gasketless design.
    • The displacement capacity of this series of diaphragm seal is 0.35 cubic inches utilizing a 1.9 inch (48.26mm) diameter diaphragm.
    • Due to the limited displacement capability of this series , gauges with dial sizes no larger than 4 1/2 inches (114.30mm) having bourdon tube ranges  no lower than 30 inches Hg/ 30 PSIG (0.207 Mpa) are applicable to this series of seal.
    • The standard pressure rating is 1,000 PSIG (6.90 Mpa)
    • Process Connection Sizes 1/4 inch NPTF through 1 inch NPTF
    Download Datasheet
    Details

  • 100J3 Diaphragm Seals for Saddle Weld Process Connections

    100J3 Diaphragm Seals for Saddle Weld Process Connections Standard Pressure Rating with Metal Lower Housings Complete with Clean-Out Option Process Connection Sizes 3inch (80mm) and larger All Pipe Schedules per ASME/ANSI B36.10 or B36.19 Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME B31.1 Equation "4"@ 100ºF (38ºC) Download Datasheet
    Details

  • 100B Diaphragm Seals for Flanged Off-Line Process Connections

    Standard Features:

    • 1 inch (25.4mm) and larger
    • Process Connections sizes 1 inch through 3 inch (25.4mm to 80mm)
    • ASME/ANSI Flange Ratings up to 2500lb Maximum Working Pressure
    Download Datasheet
    Details

  • 100AC Diaphragm Seals Complete With Clean-Out Option

    Standard Pressure Ratings with Metal Lower Housings Process Connection Sizes 1/4 NPTF  through 1 1/2 NPT Maximum Working Pressure 1000, 2000 psig ( 6.9 , 13.80 Mpa) @ 100ºF (38ºC)
    Download Datasheet
    Details

  • 100A Diaphragm Seals for Threaded Off-Line Process Connections

    Standard Pressure Ratings with Metal Lower Housings Process Connection Sizes 1/4" NPTF  through 1 1/2" NPT Maximum Working Pressure 1000,2000 psig ( 6.9 , 13.80 Mpa) @ 100ºF (38ºC) Download Datasheet
    Details

  • 700C Sanitary Diaphragm Seals for Sanitary Piping Systems

    Standard Features:

    • Instrument Connection Sizes 1/4"  NPTF OR 1/2" NPTF
    • Maximum Working Pressure Determined by Piping System Clamp Rating
    Download Datasheet
    Details

  • 300J4 Diaphragm Seals for Saddle Weld Process Connection

    Standard Features:

    •  Standard Pressure Rating with Metal Lower Housing 4 inches and larger
    • All Pipe Schedules per ASME/ANSI B16.10 or B36.19
    • Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
    Download Datasheet
    Details

  • 300B Diaphragm Seals for Flanged Off-Line Process Connections

    Standard Features:

    •  1 inch (25.40mm) and Larger
    • Process Connect Sizes 1, 2 and 3 inches
    • ASME/ANSI Flange Ratings up to 2,500lb
    • Maximum Working Pressure Conforms to Flange Pressure-Temperature Rating per ASME/ANSI B16.5
    • Flange Faces  (125-250Ra Spiral Finish is standard)
    • Raised Face, Flat Face, Ring Type Joint and Special Flange Faces are available
    Download Datasheet
    Details

  • 300A Diaphragm Seal for Threaded Off-Line Process Connections

    Standard Features:

    • Standard Pressure Rating with Metal Lower Housing
    • Process Connection Sizes 1/4 inch NPT through 1 1/2 inch NPT
    • Maximum Working Pressure 1,250 to 2,500 PSIG (8.63 to 17.25 Mpa) @ 100ºF (38ºC)
    Download Datasheet
    Details

  • GT_8 Series Milliampere Explosion-Proof Transducers

    Conoflow's GT_8 Series Transducers are explosionproof approved by Factory Mutual (FM), Canadian Standards Association (CSA) and CENELEC. These units incorporate the same high-quality standards as our other I/P Transducer lines and are backed by Conoflow's years of experience as a leading manufacturer of instrumentation.
    These units accept a variety of electrical input signals and convert them to proportional output signals of 3-15, 3-27 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa). Other output signals are also available. Consult the factory for details.

    Specifications:

    • Input Range: 4-20 mA DC | 10-50 mA DC
    • Nominal Input Impedance: 145 ohms | 60 ohms
    • Linearity: ± 1%
    • Temperature Effect: 0.2%FS/10°F (-12°C) for a 30°F (-1°C) change in 15 minutes
    • Ambient Temperature Range: 0° to +140°F (-18° to +60°C)
    • Approx. Shipping Weight: 13 lbs. (5.9 Kg)
    Details

  • GT_8 Series Milliampere Electro-Pneumatic Transducers

    Conoflow’s Electro-pneumatic Transducers accept a variety of electrical input signals and convert them to proportional output signals of 3-15, 3-27 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa).
    The GT_8 Series Transducers incorporate low impedance circuitry and a range selector jumper switch which can be positioned to accept 4-20 or 10-50 mA DC current inputs. The selector feature permits stocking only one unit that can be used in various locations throughout the plant. For easy field adjustment these units are equipped with an external zero setting and a built-in potentiometer on the circuit board for span adjustment.
    Optional input signal of 0-20 mA is available on the GT_8 Series.

    Specifications:

    • Input Range: 4-20 mA DC | 10-50 mA DC
    • Nominal Input Impedance: 145 ohms | 60 ohms
    • Linearity: ± 1%
    • Temperature Effect: 0.2%FS/10°F (-12°C) change for a 2°F/minute rate of change (2)
    • Ambient Temperature Range: 0° to +150°F (-18° to +66°C)
    • Approx. Shipping Weight: 7 lbs. (0.77 Kg)
    Details

  • GT210 Series Electro-Pneumatic Transducers

    Conoflow’s Electropneumatic Transducers accept a variety of electrical input signals and convert them to proportional pneumatic output signals. The miniature transducer is available with two different circuit boards. One board accepts current inputs of 4-20/10-50 mA DC and the other accepts inputs of 0-5/ 1-9 VDC. Each board utilizes a range selector jumper switch which can be positioned to accept a 4-20 or 10-50 mA DC input or a 0-5 or 1-9 VDC input, respectively.

    Specifications:

    • Supply Pressure Effect: 0.08 PSIG decrease for every 10 PSIG increase in supply pressure
    • Air Consumption: 0.1 SCFM (0.003 m3/min)
    • Air Delivery Rate (Max.): 4 SCFM (0.1113 m3/min)
    • Exhaust Rate (Max.): 1.5 SCFM (0.042 m3/min)
    • Linearity: ± 0.75% of Span
    • Temperature Range Ambient: 0° to +130°F (-17° to +55°C)
    • Approx. Shipping Weight: 1.7 lbs. (0.77 Kg)
    Details

  • GC31/GC34 Commandaire® Positioners

    Conoflow’s Commandaire® Positioner is a top mounted, integral positioner used with piston or spring and diaphragm actuators. Utilizing a force balance principle this unit provides proportional positioning of an actuator with stroke lengths up to 10”. The completely enclosed design eliminates exposed levers or linkages making the Commandaire® Positioner rugged and reliable.

    Specifications:

    • Supply Pressure Effect: Less than 0.15% per PSI
    • Power Amplification - (Proportional Band): Less than 5.0% deviation in signal or stroke produces full output pressure change
    • Ambient Temperature Range: -20°F to +150°F (-29°C to +66°C)
    • Flow Capacity (Dynamic): Up to 5.0 SCFM (0.14 m3/min) in either direction with a 100 PSI (690 kPa) supply
    • Air Consumption (Static): 0.3 SCFM at 40 PSI supply (0.008 m3/min at 276 kPa)
    • Air Supply: 20 PSI to 100 PSI (138 to 690 kPa)
    • Controller Signal: All standard spans and split ranges available
    • Zero Suppression: 0 to 18 PSI (0 to 124 kPa)
    • Control Actions: Direct or reverse, top or bottom loading
    • Actuator Travels: 1/4" to 10" (6.35 to 254 mm)
    • Connections: 1/4" NPT
    • Adjustment: Zero adjust is external and can be made without tools
    • Mounting: Mounted integrally to top of cylinder or spring and diaphragm actuator with 2-1/4" dimension between positioner mounting flange and actuator stem in retracted position
    • Weight: Approximate Shipping Weight: 2-3/4 lbs. (1.25 Kg)
    Details

  • GB52SC/GB53SC Series Level Actuators

    Conoflow’s Pneumatic Lever Actuators are rugged and powerful units used to automatically position dampers, louvers, variable pitch fans and to make various mechanical adjustments to process machinery. Low profile (only 18” high) requires less headroom. A sturdy ductile iron yoke with large mounting base provides rigid mounting. The steel lever arm has eight take-off positions for stroke flexibility.
    The Lever Actuator is a combination piston actuator and lever mechanism. These actuators are available in piston diameters of 6” and 8” with a maximum lever travel of 12”. Force produced is a function of the supply pressure which may be varied from 20 to 100 PSI (137 to 690 kPa) and the lever take-off position.
    The actuator assembly is completely enclosed to protect all moving parts from corrosive atmospheres and adverse weather conditions. All exterior parts are coated with a corrosion-resistant paint.
    Details

  • GB50/GB55 Series Pneumatic Piston Actuators

    Conoflow’s Pneumatic Piston Actuators are compact units designed to function in today’s high performance instrument systems. Piston diameters of 3” to 12.5” are available with standard strokes up to 10” (for stroke lengths greater than 10”, consult the factory). Integral positioners are standard for modulating service.
     
    Force produced is a function of the supply pressure which can be varied from 20 to 100 PSI (138 to 690 kPa). Fast stroking speeds are made possible through the use of a high capacity positioner coupled with a unique cushion-loading regulator. The GB50 Series Piston Actuators are designed for use in corrosive atmospheres or adverse weather conditions.
    Details

  • HP700 High Pressure Two-Stage Regulator

    Conoflow’s HP700 Series regulator is a two-stage, high purity unit designed to provide constant outlet pressure regardless of inlet pressure fluctuations. This unit is available in either brass or stainless steel construction. Maximum supply pressure rating for either material is 3500 PSIG (24.2 MPa). To provide optimum performance in specific applications, this unit is offered with relieving, non-relieving, and tied (non-relieving) diaphragm options.
    Typical applications for the HP700 regulator are gas chromatography, calibration systems, cylinder gases, and precise regulation of corrosive and non-corrosive media. Adjustment within each of five available ranges is made with a standard large handwheel. A wrench style knob with a locking device and a “T” bar handle are available as optional adjustments. This unit is supplied with 1/4” inlet and outlet connections. Inlet and outlet gauge ports (1/4” NPT) are standard. High purity internal connections and VCR, Vacuseal and Ultra Seal welded fittings are optional. Captured bonnets for both stages are standard. This regulator is designed for reliability with an absolute minimum of maintenance.
    The characteristics are a result of Conoflow’s high standards of manufacturing and years of experience as a leading manufacturer of pneumatic instrumentation.
    Details

  • HP635 Series High Pressure Regulator

    ITT Conoflow’s HP635 Series unit is a high-flow, high-purity regulator that is designed as a purge gas regulator and may be used in high purity gas systems involving corrosive and toxic media. All wetted components are of a 316 Stainless Steel construction having a maximum 35Ra surface finish. An optional brass model (NPT port only) is available for inert gas service.
    This unit has a large main valve providing a flow capacity of Cv=1.8 at the valve. Connections are 1/2” NPT or 1/2” Tube Stubs with either style having a maximum supply pressure rating of 500 psig. Outlet pressure ranges of 0-25, 0-50, 0-100, 0-150 and 0-200 psig (0-0.173, 0-0.345, 0-0.69, 0-1.04, and 0-138 MPa) are available. The HP635 Regulator is offered with an inboard and across the seat leakage specification of 2 x 10-8 atm. cc/sec Helium. Also, there is an adjustable stop that may be set to limit pressure control settings for specific application requirements.
    Details

  • HP610 High Pressure Reducing Regulator

    ITT Conoflow’s HP610 is a high purity, self-contained, spring-loaded, pressure reducing regulator. This unit is designed for use in applications requiring high flow rates and the ability to relieve outlet media pressure. Non-relieving models are also available.
    The 316 Stainless Steel constructed unit has a maximum supply pressure rating to 250 PSIG (1.73 MPa). The convoluted 316 Stainless Steel diaphragm provides accurate and reliable regulation over a control setting range of 0 - 50 PSIG (0 - 0.35 MPa).
    The HP610 has one ¼” NPT inlet connection and two ¼” NPT outlet connections. Both outlet ports provide the same flow capacity with the central port generally being used as a gauge port.
    Details

  • HP600 High Pressure Reducing Regulator

    Conoflow’s HP600 has 1/4" NPT inlet and outlet connections. Inlet and outlet gauge ports are standard. High purity internal connections and VCR, Vacuseal and Ultra Seal welded fittings are available upon request. Line and rear mounting are standard for this regulator.
    Details

  • HP500 High Pressure Reducing Regulators

    The HP500 Regulator is a self-contained, diaphragm sensing high purity regulator. A broad offering of materials of construction and five control pressure ranges allow use of this unit in applications that include the regulating of specialty gases, gas chromatography, research labs as well as the regulation of corrosive and noncorrosive gases and liquids.
    Material options include brass, 316 stainless steel and 316L stainless steel. N.A.C.E., monel and hastelloy constructions are available upon request. The brass units are rated for a maximum supply pressure of 5,000 PSIG (34.5 MPa) and the stainless steel units are rated to 6,000 PSIG (41.4 MPa). Optional 15 Ra microinch wetted surfaces are available.
    This high purity, pressure regulator is designed to accurately control pressure ranges of 4-25, 4-50, 5-100, 6-250, and 10-500 PSIG (0-0.173, 0-0.345, 0-0.690, 0-1.73, and 0-3.45 MPa). The HP500 has 1/4" NPT inlet and outlet connections. Gauge ports are optional. To suit high purity applications, Vacuseal, VCR and Ultra Seal welded fittings are available. Adjustments within each range are made with a standard large handwheel.
    A wrench style knob with a locking device and a "T" bar handle are optional adjustments.
    Details

  • HP400 High Pressure Reducing Regulator

    Conoflow's HP400 is a piston-sensing, self-contained pressure reducing regulator. High inlet and outlet pressures allow use of this regulator in component testing, calibration systems, manufacturing processes and other applications that require an economical regulator having reliable and safe operating characteristics.
    The brass constructed HP400 Regulator has a maximum supply pressure rating of 3500 PSIG (24.2 MPa). Control setting range for this unit is 20 to 2500 PSIG (0.138 -17.25 MPa). Adjustments within the range are made with a large handwheel furnished with the standard unit. Optional adjustment devices include a wrench style knob with a locking device or a "T" bar handle.
    This unit is supplied with 1/4" NPT inlet and outlet connections. Inlet and outlet gauge ports (1/4" NPT) are standard. The regulator is non-relieving with a captured bonnet.
    Details

  • HP300 High Pressure Reducing Regulator

    The Conoflow HP300 High Pressure Regulator is designed to accurately control supply pressures up to 10,000 PSIG (69 MPa). This piston sensing, self-relieving regulator allows pressure setting reduction in a closed system by relieving downstream pressure through the regulator.
    For hazardous media applications a non-relieving piston is offered. Where noncorrosive media are present, the HP300 Regulator is offered in both brass and stainless steel constructions. N.A.C.E. models are rated for a maximum supply pressure up to 6,000 PSIG (41.4 MPa). Each unit is supplied with 1/4" inlet, outlet and two gauge ports. CGA cylinder connections are also available.
    The HP300 Regulator provides excellent sensitivity through six control setting ranges: 8-500, 9-800, 10-1500, 15-2500, 25-4000, and 30-6000 PSIG (0.06-3.45, 0.062-5.52, 0.069-10.35, 0.104-17.25, 0.173-27.60, and 0.207-41.40 MPa). All of these regulated pressure ranges can be obtained from one regulator simply by interchanging range/sensor kits. Adjustment within each range is made by a large handwheel (standard) or by an optional "T" bar handle.
    Designed for reliability with minimum maintenance, this unit is commonly used for instrument calibration, for corrosive gases, airline charging systems, cylinder gas regulation, process sampling systems, cylinder filling stations and other applications where rugged construction and accurate control of high pressure is required.
    Details

  • GH30 Series Back Pressure Regulator

    The Conoflow Series GH30 Back Pressure Regulator is used to maintain a constant upstream pressure of gas, vapor or liquid. Designed for accurate regulation under low flow conditions, these units are widely used for protection of analysis instrumentation or as a relief valve in supply pressure lines to control devices.
    Details

  • GH22 Series Ratio or Flow Boosting Relay

    The Conoflow GH22 Series Relay is used to boost, amplify or reduce the pneumatic signal of a controller or similar instrument in a predetermined ratio. Using an independent supply pressure for greater flow volume, the unit relays an instrument signal to a final control element such as a valve actuator.
    Details

  • GH21 & GDH21 Series Differental Pressure Regulators

    Conoflow’s Differential Pressure Regulators are used to maintain a constant pressure differential across a variable or fixed orifice, providing a constant flow rate regardless of variations in upstream or downstream pressure. Various forms of differential pressure regulators are available.
    Details

  • GH40VT Series (Brass) Vacuum Service Regulator

    Conoflow's Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.
    Details

  • GH40VT Series (316 Stainless Steel) Vacuum Service Regulator

    Conoflow's Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.
    Details

  • GH20VT Series (Brass) Vacuum Service Regulator

    Conoflow's Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions. Metal to metal seat (standard).
    Details

  • GH20VT Series (316 Stainless Steel) Vacuum Service Regulator

    Conoflow's Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.
    Details

  • GH40 Series (Brass) Service Pressure Reducing Regulator

    Conoflow's Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna "N" diaphragms are standard in the Brass units.
    Details

Title

Copyright 2019 CB Automation Inc | All Rights Reserved
LinkedIn
Go to Top