The MV110 converter is mainly designed for application in water and HVAC markets or in other industrial markets where basic measurement requirements or output protocols are needed. Accuracy: ± 0,8% of the read value (on request ± 0,4% of the read value). Repeatability: ± 0,2% Programming through key pad on front plate or via PC connected through mini USB cable adapter Flexible mounting so that display can be seen from the top or form the front Galvanic separation: all inputs and outputs are separated one each other and with the power supply. Housing material: Nylon reinforced with 15% of fiber glass, or Aluminum Protection rate: IP 67 (on request IP68) Available functions: low flow rate cut-off, bidirectional measurement, peak cut-off, empty pipe detection, alarm limit etc. Available accessories: rechargeable backup battery (assures the measurement in case of power loss), 4 GB data logger, built-in Verificator (BIV) for electric characteristic of the sensor. It can be used in combination with any flanged or wafer Isomag® flow sensor. ISOIL Industra is a manufacturer of flow measurement products.
-
The MV110 converter is mainly designed for application in water and HVAC markets or in other industrial markets where basic measurement requirements or output protocols are needed. Accuracy: ± 0,8% of the read value (on request ± 0,4% of the read value). Repeatability: ± 0,2% Programming through key pad on front plate or via PC connected through mini USB cable adapter Flexible mounting so that display can be seen from the top or form the front Galvanic separation: all inputs and outputs are separated one each other and with the power supply. Housing material: Nylon reinforced with 15% of fiber glass, or Aluminum Protection rate: IP 67 (on request IP68) Available functions: low flow rate cut-off, bidirectional measurement, peak cut-off, empty pipe detection, alarm limit etc. Available accessories: rechargeable backup battery (assures the measurement in case of power loss), 4 GB data logger, built-in Verificator (BIV) for electric characteristic of the sensor. It can be used in combination with any flanged or wafer Isomag® flow sensor. -
ML210 Millennium 3 Series Converter / Transmitter
For MS Series Electromagnetic Sensors. Programmable microprocessor design with "Empty Pipe Detection" for automatic zeroing of the output signals; EPROM data protection on power failure; system self-diagnostic included -
ISOMAG CS3795 Insertion Electromagnetic Flowmeter Combines reliable full-pipe flow measurement with low-cost, compact size and ease of installation.
Features:- Integral converter
- 18-30VDC
- Pulse or 4-20mA output
- Accuracy to +/-2%
- Three sizes for up to 80" Pipe Diameters
- Pressures to 235 PSI
- Can be removed and reinstalled in non-pressurized lines
- Volumetric flow rate measurement independent of fluid viscosity, density and temperature
- No moving parts for zero maintenance
- Bi-directional flow measurement
- Every sensor is factory wet-calibrated
-
ISOIL MS600 Magnetic Flowmeter Features • Accuracy to +/-0.4% • Low cost. • Five sizes from 1/8" to 3/4" Pipe Diameters. • Flow ranges from 0.03 to 50 GPM.
• Standard Pressure: 230 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
ISOIL MS501 MicroFlow Magnetic Flowmeter
Features
• Accuracy to +/-0.2%
• Lower cost than flanged units.
• Six sizes from .125" to .75" Pipe Diameters.
• Flow ranges from 0.034 to 49.84 GPM.
• Standard Pressure: 230 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Wide range of process connection types; threaded, flanged, tri-clamp or compression.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
ISOIL MS501 Magnetic Flowmeter with ML4-F1 Signal Converter for demanding rapid-filling , batching and dispensing applications
Features
• High sampling rate (400 samples/second) for short duration flows.
• Accuracy to +/-0.2%.
• Lower cost than flanged units.
• Six sizes from .125" to .75" Pipe Diameters.
• Flow ranges from 0.34 to 49.84 GPM.
• Standard Pressure: 230 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Wide range of process connection types; threaded, flanged, tri-clamp or compression.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
The MS5000 Magnetic Flow Meter Features • Low Cost • Accuracy to +/-1% • Three sizes for 1", 2" and 3" Pipe Diameters. • Flow ranges from 2.4 to 800 GPM. • Standard pressure: 90 PSI. • Fast clamp-on installation.
• Integral o-rings.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
ISOIL MS3810 Hot-Tap Insertion Magnetic Flowmeter
Combines reliable full-pipe flow measurement with high accuracy, and ease of installation, even in pressurized lines.
Features
• Accuracy to +/-2.5%
• Six sizes: 6, 12, 20, 28, 40 or 80"
• For pipe sizes 3 - 300".
• Pressures to 360 PSI.
• Can be removed and reinstalled under pressure (when equipped with ball valve).
• "Push-in" type insertion/retractor assembly for quick profiling.
• Ideal for temporary measuring needs, monitoring and leak detection purposes.
• Optional pressure transducer.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• Every sensor is factory wet-calibrated. -
ISOIL MS3770 Insertion Magnetic Flowmeter
Combines reliable full-pipe flow measurement with high accuracy, low-cost and ease of installation.
FEATURES
• Accuracy to +/-2.5%
• Three sizes for 3" to 80" Pipe Diameters.
• Flow ranges from 24.3 to 498,359 GPM.
• Pressures to 235 PSI.
• Can be removed and reinstalled in non-pressurized lines.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• Every sensor is factory wet-calibrated. -
The MS 2500 flanged sensor are well suited for all application and flow ranges. The MS2500 is available in the widest range of diameters.
Features;
• Accuracy to +/-0.2% of rate from 1 to 33 ft/sec.
• Nineteen sizes from 1" to 48" Pipe Diameters.
• Flow ranges from 2.37 to 179,400 GPM.
• Pressures to 5600 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Optional Integral ground electrode eliminates grounding rings with plastic piping systems.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
The MS 2500 flanged sensor are well suited for all application and flow ranges. The MS2500 is available in the widest range of diameters.
Features;
• Accuracy to +/-0.2% of rate from 1 to 33 ft/sec.
• Nineteen sizes from 1" to 48" Pipe Diameters.
• Flow ranges from 2.37 to 179,400 GPM.
• Pressures to 5600 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Optional Integral ground electrode eliminates grounding rings with plastic piping systems.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
ISOIL MS2410 Magnetic Flowmeter
Reliable, High Accuracy Flowmeter for Food, Beverage and Pharmaceutical Applications.
Features
• Accuracy to +/-0.2%
• Ten sizes from 1/8" to 4" pipe diameters.
• Flow ranges from 0.034 to 1246 GPM.
• Standard Pressure: 230 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• Bi-directional flow measurement.
• No moving parts for zero maintenance.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated.
• Rated for 3A sanitary approval.
• Suitable for vacuum service applications.