2020/2120 SERIES 2-VALVE LIQUID LEVEL MANIFOLD VALVES
NOSHOK 2-VALVE LIQUID LEVEL MANIFOLD VALVES are designed for use with differential pressure transmitters in liquid level applications. These valves are available in either single flange or double flange connection for direct installation. The soft seat design features a replaceable Delrin® seat with straight through porting for bi-directional flow and easy roddable cleaning. -
2020/2120 SERIES 2-VALVE LIQUID LEVEL MANIFOLD VALVES
NOSHOK 2-VALVE LIQUID LEVEL MANIFOLD VALVES are designed for use with differential pressure transmitters in liquid level applications. These valves are available in either single flange or double flange connection for direct installation. The soft seat design features a replaceable Delrin® seat with straight through porting for bi-directional flow and easy roddable cleaning. -
2070/2170 SERIES BLOCK & BLEED 2-VALVE NEEDLE VALVES
NOSHOK BLOCK & BLEED 2-VALVE NEEDLE VALVES combine isolating and venting in a single valve, eliminating the need for tubing and fittings. The block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation. The 1/4" NPT vent plug may be removed and replaced with exhaust piping to direct the fluids to a safe location. The metal-tometal hard seat design is pressure rated to 10,000 psi @ 200 °F and the soft seat design, with a replaceable Delrin® seat, is rated to 6,000 psi @ 200 °F. The all 316 stainless steel blow out proof stem provides greater service life and a secondary stem seal in the full open position. The standard stem seal is below the threads and protects against galling and corrosion. -
2180 SERIES 2-VALVE STATIC PRESSURE NATURAL GAS METER MANIFOLDS
NOSHOK 2-VALVE STATIC PRESSURE NATURAL GAS METER MANIFOLDS are designed for use with orifice meters. These manifolds feature a replaceable Delrin® seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning. A blow-out proof stem provides a secondary stem seal in the full open position, and all stem threads are rolled for strength and ease of operation. These valves feature a one-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads, and a slotted spring pin to prevent accidental loosening. Vinyl dust caps are included for bonnets and stems (non-packing). -
2200 SERIES DUAL DISPLAY DIGITAL INDICATORS
NOSHOK DUAL DISPLAY DIGITAL INDICATORS accept a wide variety of input signals including thermocouples or RTDs, current, voltage, resistance & process signals, and feature a dual display with tri-color and variable intensity digits. The NOSHOK 2200 Series Dual Display Digital Indicator has a universal power input accepting either AC or DC voltage, along with a 24 Vdc sensor excitation, as well as a built-in USB port for configuring with a computer. Plug-in option cards are available for field upgrading. Interface sotware available on requsest. -
225P NEMA 4 & 13 Pressure Switch/Tamper Proof A sealed piston sensor with an efficient Nega-Rate® Belleville disc spring makes this switch well suited for high impulse hydraulic applications. Specifications • Deadband (Differential): The deadband can be selected anywhere from the minimum tabulated to a maximum of 45% of the set point • Electrical: Snap action electrical switch recognized by Underwriters’ Laboratories, Inc. and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18" long leads
• Pressure Connection: 1/4 NPT Female
• Temperature Range*:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +300°F (-40°C to +149°C)
*Temperature limits change with O-Ring selection
• Shipping Weight: Approximately 10 ounces -
232P NEMA 4X, 7, 9 & 13 Pressure Switch/Internal Adjustment
Compact, adjustable pressure switch for high pressure hydraulic process applications. Efficient Nega-Rate® Belleville disc spring for set point stability and vibration resistance. Stainless steel wetted materials and hermetically sealed, explosion proof electricals make this switch ideally suited for hazardous and corrosive media or environments.
Specifications
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18" long leads
• Pressure Connection: 1/4 NPT Female
• Temperature Range*
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +250°F (-40°C to +121°C)
• Adjustment: Internal, slotted adjustment nut with range scale
• Shipping Weight: Approximately 20 ounces -
2530 SERIES LARGE BORE, 90° ANGLE NATURAL GAS MANIFOLD VALVES
NOSHOK LARGE BORE, 90° ANGLE NATURAL GAS MANIFOLD VALVES incorporate two isolation valves for natural gas applications. These valves feature a double flange 90° angle connection for remote or direct installation. The soft seat design features a replaceable Delrin® seat with straight through porting for bi-directional flow and easy roddable cleaning. -
2WPS GENERAL PURPOSE AND ADJUSTABLE DEADBAND PRESSURE SWITCH
- General Purpose, watertight pressure switch
- Low pressure to 4,000 psi
- High current ratings for 1 x SPDT or 2 x SPDT switches
- Fixed or adjustable deadband options
- Die cast aluminum construction with welded seal
- 1% accuracy
- NEMA 4, 4X & IP66 rated
- cRU recognized (switch only)
- CRN registration pending
- 5 year warranty
APPLICATIONS
Download Product Overview Catalog Download Electronics Product CatalogSuitable for pump and compressor monitoring, HVAC systems and general industrialapplications. -
300 SERIES GAUGE WITH MIP 25-300
MAXIMUM INDICATING POINTERS (MIP) are an invaluable tool for identifying pressure spikes in a system. They are very helpful during system start up and trouble shooting. MIPs add an additional ±1% error to the gauge because of the increased load on the Bourdon tube. On ranges of 60 psi and lower, MIPs may double the allowed error of the gauge. SET POINTERS (SP) are used to identify an operating minimum or maximum pressure or vacuum value. Set pointers are available on most 100 Series gauges. -
300 SERIES NOSHOK BRASS CASE LIQUID FILLED GAUGES are high quality, heavy-duty liquid filled gauges. Their one piece die cast brass case and heavy-duty bourdon tube and movement enables them to stand up to shock and vibration encountered on the most demanding applications, including automotive, construction, hydraulics & pneumatics, mining, stamping & forming presses, and transportation.
-
300 SERIES COMPACT OEM PRESSURE TRANSDUCERS NOSHOK 300 SERIES COMPACT OEM PRESSURE TRANSDUCERS rugged, compact design delivers solid durability and long term stability during operation. Engineered for use in general industrial applications, it features technical specifications exceeding those of competitors’ transducers costing much more. A wide variety of electrical and mechanical connections are available for easy installation into most applications, along with most popular analog output signals. All electrical components carry a high degree of EMC protection compliant with EN 61326, which makes it ideal for areas where RFI, EMI or ESD signals are present. Its high quality stainless steel construction is compatible with chemically aggressive media. -
- Highest quality thermometers available on the market
- Easy to calibrate with 1/16" Allen key
- Corrosion-resistant 304 Stainless Steel case and bezel provide a hermetic seal to prevent lens fogging and moisture damage
- Single °F, single °C, and dual scale options available
- Accuracy: ±1% full scale, Grade A, ASME B40.3
- 2", 3" and 5" sizes - center back and bottom connections
- 2" Dial Size - 1/4" NPT; 3" & 5 " Dial Sizes - 1/2" NPT
- Standard stem lengths 2-1/2" through 42"
- Minimum or maximum indicating pointers are available in 3" and 5" sizes
- Highly sensitive bimetallic helix coil is heat-treated for stress relief, and silicone-coated to minimize pointer vibration and maximize heat transfer and response time
- 360° groove around stem is a visual reference to show minimum immersion point
- Made in the U.S.A.
-
300 SERIES NOSHOK MECHANICAL COMPACT SPDT PRESSURE SWITCHES WITH ADJUSTABLE HYSTERESIS are constructed with a rugged zinc-plated steel housing and process connection, and provide adjustable hysteresis. Utilizing a proven diaphragm or piston type sensing technology, it provides excellent reliability, repeatability, and affordability for use in many applications. The micro switch contacts are silver plated for extended service life and exceptional dependability. Switching functions are field adjustable, while under pressure, and it features an SPDT single changeover contact configuration. These switches are RoHs compliant. -
300/400/600/700/900 SERIES VAPOR ACTUATED REMOTE THERMOMETERS
NOSHOK VAPOR ACTUATED REMOTE THERMOMETERS operate using a temperature actuated liquid in the sensing element and a highly accurate, high quality pressure gauge to indicate media temperature. As the media temperature increases the capillary fill fluid vaporizes, causing an increase of pressure within the Bourdon tube, and activates the movement and pointer for proper indication. Dial scale graduations are non linear, therefore, the highest degree of accuracy and readability is found in the upper half of the scale. -
3000 SERIES 80 CM2 NOMINAL DIAMETER HYDRAULIC LOAD CELLS
NOSHOK 80 CM2 NOMINAL DIAMETER HYDRAULIC LOAD CELLS are constructed from a high grade, corrosion resistant stainless steel and joined with a high quality NOSHOK pressure gauge or transducer to measure axial loads and bearing forces in turning and drilling machines, extruders and other compression force measurement applications. Accuracy levels range from ±0.125% full scale (BFSL) to ±1.5% full scale depending on the measuring instrument with measuring ranges from 360 lbf through 70,000 lbf. -
Our Pepperl+Fuchs Bebco EPS 3000 series, Type Y or Z / Ex pz purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. The system reduces the classification within the protected enclosure from a Zone 2 to non-hazardous area.
- DEMKO, ATEX, UL,cUL & FM classified
- Conforms to NFPA 496 and ISA 12.4 EN 50016, and ATEX standards
- For Type Y, Type Z, and Type pz applications
- Enclosure volumes to 250 cu. ft.(7.08 cu. m)
Type Ex pz purge system models - 3000 series
3003: Class I Enclosure Volumes ≤ 90 ft33004: Class I Enclosure Volumes ≤ 250 ft3 -
The Pepperl+Fuchs Bebco EPS 3000 series, Type Y purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. The system reduces the classification within the protected enclosure from a Division 1 to a Division 2 area.
- UL, cUL & FM classified
- Conforms to NFPA 496 and ISA 12.4 standards
- For Type Y or Type Z applications
- Enclosure volumes to 250 cu. ft.(7.08 cu. m)
Type Y purge system models - 3000 series
3003: Class I Enclosure Volumes ≤ 90 ft3 3004: Class I Enclosure Volumes ≤ 250 ft3 -
The Pepperl+Fuchs 3000 series Type Z purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. Suitable for Class 1, Division 2 to non-hazardous and Zone 2 to non-hazardous.
- DEMKO, ATEX, UL, cUL & FM classified
- Conforms to NFPA 496 and ISA 12.4 EN 50016, and ATEX standards
- For Type Y, Type Z, and Type nP applications
- Enclosure volumes to 250 cu. ft.(7.08 cu. m)
Type Z purge system models - 3000 series
3003: Class I Enclosure Volumes ≤ 90 ft33004: Class I Enclosure Volumes ≤ 250 ft3 -
Download DatasheetStandard Features:
- Standard Pressure Rating with Metal Lower Housing
- Process Connection Sizes 1/4 inch NPT through 1 1/2 inch NPT
- Maximum Working Pressure 1,250 to 2,500 PSIG (8.63 to 17.25 Mpa) @ 100ºF (38ºC)
-
Download DatasheetStandard Features:
- 1 inch (25.40mm) and Larger
- Process Connect Sizes 1, 2 and 3 inches
- ASME/ANSI Flange Ratings up to 2,500lb
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Rating per ASME/ANSI B16.5
- Flange Faces (125-250Ra Spiral Finish is standard)
- Raised Face, Flat Face, Ring Type Joint and Special Flange Faces are available
-
Standard Features:
- 3" (76.20mm) 150# and 3" (76.20mm) 300lb
- Process Connection Sizes 3" ASME/ANSI Flange Ratings 150# and 300# ... other flange ratings available
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Ratings per ASME/ANSI B16.5
- Flange Faces, Raised Face and Flat Face
Download Datasheet
-
Standard Features:
- 1 1/2 inch (25.40mm) through 8 inch
- ASME/ANSI Flange Ratings up to 2,500lb
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Rating per ASME/ANSI B16.5
- Flange Faces (125-250Ra Spiral Finish is standard)
- Raised Face, Flat Face , Ring Type Joint and Special Flange Faces are available
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing 3 inches and larger
- All Pipe Schedules per ASME/ANSI B16.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
Download Datasheet
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing 4 inches and larger
- All Pipe Schedules per ASME/ANSI B16.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
Download Datasheet
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing 1/4 inches through 1 inch
- All Pipe Schedules per ASME/ANSI B36.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
Download Datasheet
-
Download Datasheet
Standard Features:
- Standard Pressure Rating with Metal Lower 1/4 inches through 1 inch
- All Pipe Schedules per ASME/ANSI B36.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
-
3010/3110 SERIES 3-VALVE DIFFERENTIAL PRESSURE MANIFOLD VALVES
NOSHOK 3-VALVE DIFFERENTIAL PRESSURE MANIFOLD VALVES are designed for use with differential pressure transmitters incorporating two isolation valves and an equalizing valve in differential pressure measurement. These valves are available in block, single flange or double flange connection for remote or direct installation. The soft seat design features a replaceable Delrin® seat with straight through porting for bi-directional flow and easy roddable cleaning. -
Standard Features:
- Standard Pressure Rating with Metal Lower Housing
- Process Connection Sizes 1/4 " NPTF through 1 1/2" NPTF
- Maximum Pressure Rating 1250, 2500 PSIG (8.63, 17.25Mpa) @ 100ºF (38ºC)
Download Datasheet
-
Standard Features:
- 2" (50.80mm) and Larger
- Process Connection Sizes 2" through 3" ASME/ANSI Flange Rating up to 2500lb
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Ratings per ASME/ANSI B16.5
- Flange Faces (125-250Ra Spiral Finish is standard)
- Raised Face , Flat Face , Ring Type Joint and Special Flange Faces are available
Download Datasheet
-
Replaces Siemens/Moore 352 and 353 controllers Upgrade to latest technology without changing form factor Lower support & re-engineering costs Easier, more informed operation
The 353 RetroPAK provides a pain-free migration path from Siemens/Moore 352 and 353 controllers to the latest technology. It includes the features that made these controllers so popular combined with a bright, informative operator display. In addition, it offers a host of other powerful features that make RetroPAK the logical choice for replacing aging 352 and 353 controllers.Features:
- Robust, highly visible display
- Expanded operating and alarm information for better operations
- State-of-the-art surface mount technology
- Peer-to-peer, Modbus RS-485 and Ethernet Modbus/TCP communication
- Fits same panel cut-out
- 352/353 factory templates and function block library
- Portable Memory Module option
- 2-year Warranty
-
3540 SERIES TENSION AND COMPRESSION FORCE TRANSDUCERS NOSHOK TENSION AND COMPRESSION FORCE TRANSDUCERS are available in many different sizes and shapes to fit almost any application. They are available in measuring ranges as small as 0 kN to 1 kN and as high as 0 kN to 500 kN with an accuracy of ±0.2% of full scale Cn. Several outputs are available in both amplified and unamplified to interface with most electrical systems. Many versions are manufactured from stainless steel which makes them suitable for installation in harsh environments. Applications for use of this product include cable or rod tension, weight measurement, overload protection, clamping force and fill level measurement. -
400 SERIES MECHANICAL HEAVY-DUTY PRESSURE SWITCHES
NOSHOK MECHANICAL HEAVY-DUTY PRESSURE SWITCHES provide excellent repeatability and features a robust design for applications requiring maximum accuracy under extreme loads. With a switching point setting that remains stable for years, this switch converts pneumatic and hydraulic pressure into switching functions, and depending on the type of connection, it can easily be used as a N.C., N.O. or SPDT contact. The switching point is fully adjustable and includes a locking mechanism. This switch is fitted with DIN EN175301-803 Form A connectors for fast and easy installation. It is also available with a socket with an LED for easier switch point adjustment and visual status indication, or without the socket and an M12 x 1 (4-pin) electrical connection.
-
400/500 SERIES DRY AND LIQUID FILLED ALL STAINLESS STEEL GAUGES NOSHOK DRY AND LIQUID FILLED ALL STAINLESS STEEL GAUGES are corrosion-resistant fillable dry or liquid-filled gauges. They are used in corrosive service world-wide where ruggedness and reliability are critical. Typical applications include chemical processing, oil field & offshore, paper mills, agriculture plants, marine, and water & wastewater. Extreme high pressure ranges available. Ammonia gauges available in certain ranges. -
400/500 SERIES STANDARD NEEDLE VALVES NOSHOK STANDARD NEEDLE VALVES are the work horses of the industry. The 400 Series’ metal-to-metal hard seat design is pressure rated to 10,000 psi @ 200 °F and helium leak tested to 1x10-4 ml/s for guaranteed performance and reliability. The 500 Series valves are fitted with a precision molded, replaceable Delrin® soft seat which is the key to the bubble tight seal. They have a maximum pressure rating of 6,000 psi @ 200 °F with straight through porting for bi-directional, high capacity flow and easy roddable cleaning. The all 316 stainless steel blow out proof stem provides greater service life and provides a secondary stem seal in the full open position. On the 400 Series, the stem and the one piece bonnet threads are rolled for greater strength and ease of operation. Both the 400 and 500 Series feature stem seal below the threads to protect against corrosion and galling. -
4001V ANACONDA INDUSTRIAL HOSE PUMPS. Exceptional self-priming capabilities make the 4001V Series an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers.
Self priming pump can be run dry without damage. Flow rates from 1 to 330 GPH. Pressures to 100 psi. -
The Pepperl+Fuchs 5000Q series Ex pz purge is a small and compact purge system. The 5000Q operates by controlling and monitoring compressed instrument air or inert gas through the protected enclosure(s) to remove and prevent the accumulation of flammable gas, vapors, or dust. It is a powerful purge system designed to meet your Zone 2, 22 installation requirements.
The 5000Q series control unit features these main parts:
- Up to 3 PT100 RTD’s connected for temperature monitoring or control
- LCD for viewing programming and operation modes
- Field configurable through menu driven programs for most applications