VANTAGE 4700
Multipath Flowmeters. Two and three path diametrical sensor configurations are recommended for applications that do not have normal upstream straight runs to produce well developed velocity profiles -
VANTAGE 4700
Multipath Flowmeters. Two and three path diametrical sensor configurations are recommended for applications that do not have normal upstream straight runs to produce well developed velocity profiles -
OMNI pioneered flow computing based on maintaining a fixed calculation cycle time rather than task loading. Today’s OMNI flow computer still maintains a measurement calculation cycle time of 500ms that exceeds any industry requirements.
Calculations are carried out in double precision (64-bit), floating point format for greatest accuracy. Totalization integrity is assured through the well established industry practice of
triplicated (Tri-reg) storage and checking routines.
OMNI Features:
With its fast one second power-up recovery, field proven reliability, longevity, and usability, OMNI has the lowest cost of ownership in the business. The result of continuous end user requirement development, the OMNI track record stands alone protecting the interest of both buyer and seller in Custody Transfer measurements.
- One second power up
- Three year Limited Warranty
- Crude Oil, Refined Products, LPGs, Anhydrous Ammonia, Ethylene, Chemical, Natural Gas, NGLs, Specialty Gases, Water and Steam Product selection
- Stream, Batch and Station totalization
- Multiple Products with individual product totalizers
- Multiple Batch Consolidation
- Batch recalculation
- Batch Stack – Product Scheduling
- Automatic prove sequence control
- All Meter Types: DP, PD, Turbine, Coriolis, Ultrasonic
- K-Factor and Meter-Factor Linearization
- Viscosity Linearization
- All Prover types
- Multiple I/O types, 4-20mA, 1-5V, HART, Honeywell DE, Rosemount MV, Coriolis MVS
- Meter run and Station densitometer
- Redundant Gas Chromatograph interface
- Run Switching
- Premium Billing
- Maintenance Mode
- Multiple Modbus/TCP and Modbus over Ethernet (Multiple socket) as well as conventional RS232/485 connections
- AC or DC powered
- Configure from Keypad or PC
- Multiple Metrological Approvals
- Broad ambient temperature range
- Calculations performed to 64 bit double precision accuracy
- PID control loop with Primary and secondary control parameters
- Virtual inputs for system simulation and testing
- Unique on-board Help
- Simple firmware upgrades
-
Featuring a very narrow installation footprint,
miniMOORE™ Signal Isolators, Converters, Boosters
and Splitters combine multiple analog signal channels
in a rugged, easy-to-install signal conditioner.
Reliable and very economical, the miniMOORE
multi-channel family includes the model MIX 2-wire
(loop) and the model MIT 4-wire (line/mains) powered
models. The complete family delivers cost-effective
solutions for an expansive range of signal interface
applications. -
The JS-10 (1 amp) and JS-30 (3 amp) switches are magnetically actuated point level switches for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps these switches isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly.
Features:
- No process piping or valves required
- Retrofit onto existing MLG installations
- Internal bias magnet maintains state in high-vibration environments
- Available in SPDT (one internal switch) or DPDT (two internal switches)
- Available with flying leads (no enclosure), Epoxy-coated Aluminum enclosure, or 316 Stainless Steel Enclosure
- Class I, Division 1, Groups B, C, D
- Class I, Division 2, Groups ABCD
- Class II and Class III, Groups EFG
- ATEX and IEC ratings (pending)
- Maintenance-free
-
The JP-450 is a magnetically actuated “no bleed” pneumatic point level switch for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps the switch isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly. Two JP-450’s can be coupled with a JPLR latching relay to give plug-and-play dump/fill valve control.
Features:
- No process piping or valves required (except customer pneumatic lines)
- Retrofit onto existing MLG installations
- “Snap-action” design maintains state in high-vibration environments
- Accepts filtered air or gas supply
- Field configurable (High/Low level)
- 316 Stainless Steel enclosure
-
The microNCS provides a real-time signal gateway between the field or factory floor and your control strategy. Part of Moore Industries’ NCS NET Concentrator System® family of intelligent distributed I/O, the stand-alone microNCS accepts four or eight fully-isolated analog inputs and four discrete (contact closure) inputs. It “concentrates” this data onto one or multiple communication links, and transmits it long distances back to one or more host DCS, PLC or PC-based control systems. -
Teflon® Coated Guided Wave Radar
Continuous Liquid Level Meter
The MLR radar level meters are compact level measurement device that include a transmitter that emits microwave pulses along a rod or wire rope electrode. The pulse propagates along the electrode in the form of electromagnetic wave toward the level surface, where it is reflected and the signal wave component is returned to the receiving module of the electronic housing. The on-board circuitry measures the time of flight of electromagnetic wave and the distance to the surface level is calculated. According to the level height, the level meter output is set and the measured value is shown on the display. Radar level meters are resistant against changes in the atmosphere (pressure, temperature, dust, steam) and to changes in medium parameters (change in dielectric constant and conductivity).Features:
- Suited for Continuous Level Measurement of various Liquid / Bulk Solids / Viscous Materials
- View Measured Values on the Display
- Universal Use / Direct Mounting onto Hoppers / Silos / Tanks / Sumps
- Teflon® Coated Stainless Steel Rod or Rope
- Electrode Measuring Range up to 40m
- Explosion Proof / ATEX (Optional)
- Temperature -40C to 200C
- Pressure Steel Rod (30°C/4MPa , 85°C/2MPa , 130°C/2MPa, 160°C/1,5MPa200°C/0.3 MPa) Rope (30°C/1MPa, 85°C/0.5MPa,130°C/0.1MPa)
- Current Output (4-20mA) / HART® Protocol
- Supply voltage 18 to 36VDC
- IP67
-
MLD-35 Series Teflon® Capacitance Level Sensor
MLD-35 Series Continuous Level Sensors are intended for level measurement of liquid and bulk solids in tanks, vessels sumps or silos, hoppers, etc. They are comprised of a housing with electronic module and a electrode that converts a capacitance signal to a current signal of 4-20mA or voltage signal (0-10V) output. The MLD series incorporates a Teflon® encapsulated measuring electrode making it suitable for corrosive chemicals and sticky polymers.Features:
- Continuous Level Measurement of Liquids or Bulk Solids up to 10 feet
- 4-20mA Loop Powered
- Supply Voltage 12-34 VDC
- Output Current 4-20mA (2-wire) / 0-10 VDC (3-wire)
- Teflon® Coated Electrode
- Excellent Chemical Resistance
- Visual indication of Function and Status of Level via two LED Lights located on housing
- Wide Selection of Electrical Connections
- Heavy Duty Design
- IP67 / IP68
- Temperature -40°C to 200°C
-
ML210 Millennium 3 Series Converter / Transmitter
For MS Series Electromagnetic Sensors. Programmable microprocessor design with "Empty Pipe Detection" for automatic zeroing of the output signals; EPROM data protection on power failure; system self-diagnostic included -
The LT330 Series is designed to measure liquid level in a wide variety of applications.
The compact, loop-powered LT330 provides continuous, non-contacting level measurement. Up to 33ft (10m) range.
The large LCD display, 4 status lights and 5 button keypad make setup and operation quick and easy.
Features:
- 33ft (10m) range
- Accuracy of 0.2% with 1mm resolution
- Easy to install 2” NPT fitting
- Loop powered 4-20mA (max 750 Ω)
- 5 digit numeric LCD display
- Integral 5 button keypad
- 4 status lights
- Built-in temperature compensation sensor
- Bulk Chemical Storage
- Pump Stations
- Clarifiers
- Filtration Levels
- River Level Monitoring
- Trash Rack Level Monitoring
- Waste Sump
- Tanker Truck Filling
- Water Storage Towers
- Reactors
-
The LT260 Series is designed to measure liquid level in a wide variety of applications.
The compact, loop-powered LT260 provides continuous, non-contacting level measurement. With a measuring range of 26ft (8m) the LT260 will accommodate a wide range of applications.
The large LCD display, 4 status lights and 5 button keypad make setup and operation quick and easy.
Features:
- Low Cost
- High Accuracy
- Non-Contact Measurement
- No Moving Parts
- Compact, Lightweight Design
- Corrosion Resistant Materials
- Built-in Temperature Compensation
- Programmable 4-20mA Output
- Selectable Transducer Power Level
- Adjustable Damping
- Displays Level, Distance or Space
- Loss of Echo Indicator
- Interface this level sensor with the FLOMOTION DR5000 Chart Recorder
- Bulk Chemical Storage
- Pump Stations
- Clarifiers
- Filtration Levels
- River Level Monitoring
- Trash Rack Level Monitoring
- Waste Sump
- Tanker Truck Filling
- Water Storage Towers
- Reactors
-
LSS Series PP Body Plastic Paddle Wheel Flow Meter
Features:
- Up to 24" Pipe Size
- Zirconium Ceramic Rotor / Bearings
- Accuracy ±0.75% of Full Scale
- Retrofits Into Signet® Type Fittings
- Large Display Changes from Green to Red when in Alarm State
- Accuracy ± 0.75% Of Full Scale
- Pipe Size (1/2 -24 Inch)
- Heavy Duty Industrial Design
- Sensor Body Material Natural PVDF / PP
- Rotor Material PFA Teflon
- Shaft and Bearing Material Zirconium Ceramic (Zr02)
- Display Housing Material Polymide 66 +PBT + 15% Glass Filled (UL94V-0)
- Flow Rate + Totalizer (Resettable)
- Memory Mode Non-Volatile EPROM
- Flow Velocity Range (0.33 to 26 Ft/S) (0.1 To 8 M/S)
- Measuring Viscosity Range 0.5 to 20 cts
- Maximum Particle Size <0.5mm2 (Max particle size)
- Maximum Operating Pressure 200psig at -30C
- Maximum Temperature 36 psi at 90C
- Eprom Memory-Totalizer Value Will Not Be Lost
- Nema 4X (IP66) Protection • Bright LED Display Flow Units-- Litre, USGPM, M3, Ton
- 4-20mA + Two (7) Amp Relays Output (Standard)
- Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
- Pulse Output Transistor NPN Open-collector (Max. DC 60V/100ma)
- Supply Voltage 14 to 28Vdc
- Communication RS-485 Modbus RTU Mode
- Protection Class IP65/ NEMA 4X
- Corrosion Resistant All Plastic Wetted Parts-PVDF/PP Body Zirconium Ceramic Shaft-PFA Teflon Paddle
- Simple Installation
- Up to 24" Pipe Size