ICON Process Controls Archives - Page 2 of 4

LSS Series PP Body Plastic Paddle Wheel Flowmeter

LSS Series PP Body Plastic Paddle Wheel Flow Meter

Features:

Up to 24" Pipe Size
- Zirconium Ceramic Rotor / Bearings
- Accuracy ±0.75% of Full Scale
- Retrofits Into Signet® Type Fittings
Large Display Changes from Green to Red when in Alarm State
Accuracy ± 0.75% Of Full Scale
Pipe Size (1/2 -24 Inch)
Heavy Duty Industrial Design
Sensor Body Material Natural PVDF / PP
Rotor Material PFA Teflon
Shaft and Bearing Material Zirconium Ceramic (Zr02)
Display Housing Material Polymide 66 +PBT + 15% Glass Filled (UL94V-0)
Flow Rate + Totalizer (Resettable)
Memory Mode Non-Volatile EPROM
Flow Velocity Range (0.33 to 26 Ft/S) (0.1 To 8 M/S)
Measuring Viscosity Range 0.5 to 20 cts
Maximum Particle Size <0.5mm2 (Max particle size)
Maximum Operating Pressure 200psig at -30C
Maximum Temperature 36 psi at 90C
Eprom Memory-Totalizer Value Will Not Be Lost
Nema 4X (IP66) Protection • Bright LED Display Flow Units-- Litre, USGPM, M3, Ton
4-20mA + Two (7) Amp Relays Output (Standard)
Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
Pulse Output Transistor NPN Open-collector (Max. DC 60V/100ma)
Supply Voltage 14 to 28Vdc
Communication RS-485 Modbus RTU Mode
Protection Class IP65/ NEMA 4X
Corrosion Resistant All Plastic Wetted Parts-PVDF/PP Body Zirconium Ceramic Shaft-PFA Teflon Paddle
Simple Installation

Details

MLD-35 Series Teflon® Capacitance Level Sensor

MLD-35 Series Continuous Level Sensors are intended for level measurement of liquid and bulk solids in tanks, vessels sumps or silos, hoppers, etc. They are comprised of a housing with electronic module and a electrode that converts a capacitance signal to a current signal of 4-20mA or voltage signal (0-10V) output. The MLD series incorporates a Teflon® encapsulated measuring electrode making it suitable for corrosive chemicals and sticky polymers.

Features:

Continuous Level Measurement of Liquids or Bulk Solids up to 10 feet
4-20mA Loop Powered
Supply Voltage 12-34 VDC
Output Current 4-20mA (2-wire) / 0-10 VDC (3-wire)
Teflon® Coated Electrode
Excellent Chemical Resistance
Visual indication of Function and Status of Level via two LED Lights located on housing
Wide Selection of Electrical Connections
Heavy Duty Design
IP67 / IP68
Temperature -40°C to 200°C

Details

MLR-70 Series Guided Wave Radar Level Transmitter

Teflon® Coated Guided Wave Radar

Continuous Liquid Level Meter

The MLR radar level meters are compact level measurement device that include a transmitter that emits microwave pulses along a rod or wire rope electrode. The pulse propagates along the electrode in the form of electromagnetic wave toward the level surface, where it is reflected and the signal wave component is returned to the receiving module of the electronic housing. The on-board circuitry measures the time of flight of electromagnetic wave and the distance to the surface level is calculated. According to the level height, the level meter output is set and the measured value is shown on the display. Radar level meters are resistant against changes in the atmosphere (pressure, temperature, dust, steam) and to changes in medium parameters (change in dielectric constant and conductivity).

Features:

Suited for Continuous Level Measurement of various Liquid / Bulk Solids / Viscous Materials
View Measured Values on the Display
Universal Use / Direct Mounting onto Hoppers / Silos / Tanks / Sumps
Teflon® Coated Stainless Steel Rod or Rope
Electrode Measuring Range up to 40m
Explosion Proof / ATEX (Optional)
Temperature -40C to 200C
Pressure Steel Rod (30°C/4MPa , 85°C/2MPa , 130°C/2MPa, 160°C/1,5MPa200°C/0.3 MPa) Rope (30°C/1MPa, 85°C/0.5MPa,130°C/0.1MPa)
Current Output (4-20mA) / HART® Protocol
Supply voltage 18 to 36VDC
IP67

Details

NC-15 / NC-25 SERIES Non-Intrusive Flow / Level Switch

All Plastic Design
Excellent Chemical Resistant
No Pressure Drop

Featues:

Senses Liquid through Tubing
Tubing Size ¼" to ½"
Flow / No Flow
Non-Intrusive
Air Bubble Detection
All Plastic Design
Simple to Install
Heavy Walled Tubing / Up to 0.062"
Lightweight
Very Accurate / Sensitivity Adjustment
Perfect for Dosing or Metering Pumps

Specifications:

Applicable Pipes Size 3/8 - ½" / (7 to 13 mm) Materials PolyCarbonat Wall thickness 0.62" Sensing Object Liquid Sensing methods Electrostatic Capacitive / Photoelectric Repeat Accuracy ±0.2 mm max. Power Supply 12 to 24VDC /10% max. ripple / (10.8 to 30VDC) Current Consumption 12mA max. Relay Output Load current /NPN / PNP (100mA max) Residual voltage 1V max. (Load current: 100mA Indicators Detection indicator (orange) Ambient Temperature Range Operating: 0 to 55°C (with no icing or condensation), Storage: -10 to 65°C (with no icing or condensation) Ambient Humidity Range Operating/Storage: 25% to 85% (with no condensation)

Ambient Humidity Range Operating/Storage: 25% to 85% (with no condensation) Temperature Influence ±4 mm of detection level at 23°C in the temperature Range of 0 to 55°C (with pure water or 20% saline solution) Voltage Influence ±0.5 mm of detection level at the rated voltage in rated voltage ±10% range Insulation Resistance 50 M Ohm min. (at 500VDC) between current-carrying parts and case Dielectric Strength 500VAC, 50/60 Hz for 1 min between current-carrying parts and case Vibration Resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock Resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of Protection IP66 (IEC) Connection Method Pre-wired Models (Standard cable length: 2 m) Weight (packed state) Approx. 70 g

Details

NC-30 Series Non-Contact Liquid Level / Flow Switch

The NC30 Non-Contact liquid Level / Flow Sensor has been designed using high frequency technology to sense the presence of liquid / conductive / non conductive Suitable for Non-Metalic Tubing / Tanks / Drums / Pipe

Non-Contact
Senses through wall
Relay Output
Conductive and Non-Conductive Liquids

Featues:

All Plastic PP Design
Non-Intrusive Liquid Level / Flow Detection through Plastic or Fiberglass Walls
Small Footprint / Easy to Install
LED Display
M12 Disconnect or Fixed Cable Connector
Fits on ½"- 2" Diameter Pipe / Sch 40 / 80
Senses up to 0.3" / (8mm) Wall Thickness

Specifications:

Supply voltage 6 -30VDC Supply current Output type / Pulse Max. 0.6 / 7mA (OFF / ON State) Output type / S - Relay Max. 0.6mA (OFF State) Switched current (Min / Max) Output type / Pulse 100mA Conductive liquids 0.3" (8mm) Non-conductive liquids 0.11" / (3 mm) Ambient temperature range -20 / +80°C Temperature tube/vessel surface -20 / +90°C Housing material Plastic (PP) Protection class NEMA 4X / IP67 Cable Connection PVC Weight (including 2 m cable) Approx. 60 g

Details

OBS Series Pressure Gauge and Isolator

All Plastic Design No Filling Required Excellent Chemical Resistance Pressure Range Markers

Features:

All Plastic / Gauge & Isolator / Filled
Heavy Duty Design / Simple to Install
Completely Corrosion Resistant
Designed to Act as Visual Pressure Alert for Bag / Filter Change-Out
Extra Large Color Display
Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
Highest Accuracy in Industry / ±1.5%
No Filling Required
Glycerin Fill or Silicone (Opt)
One-Piece Molded Design (No Assembly)
Suitable for Corrosive Media + Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection / ½" Housing PVC / CPVC / PP / PVDF / PTFE Teflon® Diaphragm / One Piece Molded Design Lens High Impact Polycarbonate Dial Red & Black Scale White Background, dial arc 270° Measuring Principle Bourdon Tube Diaphragm / Teflon® Movement SS316 / Brass / (Non Wetted) Gauge Red / Yellow / Green / Movable Plastic Pressure Pressure Markers Connection ½" (M) / (F) NPT / G Type / Flange Filling Glycerin or Silicone (Opt) Accuracy ±1.5% F.S. Operating Temperature PVC - 140°F / CPVC - 180°F / PP - 175°F PVDF - 225°F Pressure Range Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / bar / MPa / Other Scales (Non-Shock)

Details

OBS-2VU Series Double Sided All Plastic Gauge + Isolator

One Piece / Double-Sided Design No Filling or Assembly Required Adjustable Range Markers

Features:

Industry's First All Plastic Double Sided Gauge
Heavy Duty Rugged Design
Completely Corrosion Resistant
Designed to Act as Visual Pressure Alert
Extra Large Color Display
Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
Highest Accuracy in Industry / ±1.5%
Factory Filled / Glycerin or Silicone (Opt)
Dual Scale / psi/kPA / psi/bar (Opt)
One-Piece Molded Design
Suitable for Corrosive Media + Slurries

Specifications:

Power Supply 24VDC Output SPST(Std) or PNP/NPN (Opt) Medium Density > 0.6g/cm3 Operation Point Vertically inserted approx 1" (25mm) Oscillation Starting Time About 3mm Response Time About 1 seconds Output DC 30V /3A Hysteresis settings About 3mm Relay Delay Time 1~505 Power Consumption < 1W Process Connection ¾" NPT/G Thread Electrical Connector M20x 1.5 (Electriccoated cable: 6-8mm) Material to Contact Liquid 316 SS Coated PTFE Teflon® Electrical Connection Gland M16 x 1.5 (standard)

Details

OBS-A Series All Plastic Center Mount Gauge + Isolator

Corrosion Resistant No Filling Required High Accuracy

Features:

All Plastic Gauge & Isolator / Filled
Heavy Duty Design / Simple to Install
Completely Corrosion Resistant
Range Markers Act as Visual Pressure Alert
Extra Large Color Display
Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
Highest Accuracy in Industry / ±1.5%
Glycerin or Silicone (Opt)
No Filling Required
One-Piece Molded Design / No Assembly
Suitable for Corrosive Media / Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Panel Mount Housing PP / Teflon® Diaphragm - One Piece Molded Design / (No Assembly / Filling Required) Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 Diaphragm / PTFE Teflon® Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Pressure Range Pointers Fitted on the Bezel Connection ½" (M) / (F) NPT / G Type / Flange Filling Glycerin / Silicone (Optional) Accuracy ±1.5% F.S. Operating temperature PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / (Non-Shock

Details

OBS-DGO Series Plastic Double Sided Gauge1/4″ SST NPT

Double-Sided No Filling Required Visual Pressure Range Markers Corrosion Resistant

Features:

Heavy Duty / Double Sided
Suitable for Corrosive Environments
Dual Scales Heavy
Duty Design
3 Range Tabs / Red / Yellow / Green
Large 2½" Color Display
High Accuracy / ±0.75 %
Factory Pre-Filled
Glycerin (Std) / Silicone (Opt)
Visual Pressure Ranges
Simple to Install
Perfect Mate for Plastic Isolators

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection Housing Polypropylene Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 / Brass Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection ¼" (M) NPT / G Type / 316 SST Filling Glycerin / Silicone (Opt) Accuracy ±0.75% Operating temperature Max. Working Temp / PP - 180°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available bar / MPa - Pressures up to 1500 psi available

Details

OBS-GO Series All Plastic Gauge Only-1/4″ SST NPT

No Filling Required Suitable for Corrosive Environments High Impact Casing

Features:

Heavy Duty Design
Suitable for Corrosive Environments
Dual Scale / Red / Black
Suitable for Pulsing Applications
3 Range Tabs / Red / Yellow / Green
Extra Large Color Display
High Accuracy / ±0.75 %
Factory Pre-Filled Glycerin
High Impact Casing
Visual Pressure Ranges
Simple to Install
Perfect Mate for GI Series Isolators

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection MNPT / ¼" Housing Polypropylene Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 / Brass Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection ¼" (M) NPT / G Type / 316 SST Filling Glycerin (Std) / Silicone (Opt) Accuracy ±0.75% Operating temperature Max. Working Temp / PP - 180°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) (Pressures up to 1500 psi) Other units available / bar / MPa

Details

OBS-LC SERIES – Pressure Gauge & Isolator / Battery Operated

One Piece Plastic Design Battery Operated > 3 Years Digital Combo Gauge + Isolator

Features:

All Plastic Gauge & Isolator
No Filling Required
Heavy Duty Design / Simple to Install
Completely Corrosion Resistant
Extra Large LCD Display
Reduces Small Pressure Surges caused by
Water Hammer / Metering Pump Pulsations
Highest Accuracy in Industry / ±1%
One-Piece Molded Design / No Assembly
Suitable for Corrosive Media + Slurries
No Programing Required
PTFE Diaphragm / Standard
Replaceable Lithium Battery
Long Life > 3 Years

Specifications:

Dial Diameter Large 2½" Face / Big Numbers Mounting Bottom Connection / ½" Housing PP / PVDF / (PTFE Teflon®) Diaphragm Lens One Piece Molded Design / No Assembly Display Liquid Crystal Display - LCD Programming Push-Button / Eprom Non-Volatile Accuracy ±1.0% F.S. Operating Temperature PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Connection ½" (M) / (F) NPT / G Type / Flange Pressure Range* 150 psi / 10 bar) * (Non-Shock)

Details

OBS-LE SERIES – Digital LED Pressure Gauge / Transmitter / Switch

Completely Corrosion Resistant Accuracy ±1% 4-20mA + 2 Relay Outputs psi / bar / MPa / Kg/cm2

Features:

All Plastic / Gauge & Isolator
Heavy Duty Design / Simple to Install
Completely Corrosion Resistant
Green LED changes to Red in Upset Condition
Extra Large LED Display
Reduces Pressure Surges
Simple Push Button Programming
High Accuracy / ±1.0%
Visual Notification of Relay Outputs
No Filling Required
One-Piece Molded Design / No Assembly
Suitable for Corrosive Media + Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers Mounting Direct Mount / MNPT / FNPT / ½" Housing PVC / PP / PVDF / PTFE Diaphragm One Piece Molded Design (No Assembly) Lens Polycarbonate Dial LED - Green (Normal) / Red (Relays Active) Connection ½" (M) / (F) NPT / G Type / Flange Accuracy ±1.0% Operating temperature PVC 140°F / CPVC 180°F / PP 170°F / PVDF 195°F Pressure Range* 0-150 psi / 10 bar / (Ambient Temp) *(N0n-Shock) Output 4-20mA + 2 (NPN or PNP) Relay Outputs Power Supply 10-30VDC SPECIFICATIONS

Details

ICON Process Controls

LSS Series PP Body Plastic Paddle Wheel Flow Meter

Features:

MLD-35 Series Teflon® Capacitance Level Sensor

Features:

Teflon® Coated Guided Wave Radar

Continuous Liquid Level Meter

Features:

Featues:

Specifications:

Featues:

Specifications:

All Plastic Design No Filling Required Excellent Chemical Resistance Pressure Range Markers

Features:

Specifications:

One Piece / Double-Sided Design No Filling or Assembly Required Adjustable Range Markers

Features:

Specifications:

Corrosion Resistant No Filling Required High Accuracy

Features:

Specifications:

Double-Sided No Filling Required Visual Pressure Range Markers Corrosion Resistant

Features:

Specifications:

No Filling Required Suitable for Corrosive Environments High Impact Casing

Features:

Specifications:

One Piece Plastic Design Battery Operated > 3 Years Digital Combo Gauge + Isolator

Features:

Specifications:

Completely Corrosion Resistant Accuracy ±1% 4-20mA + 2 Relay Outputs psi / bar / MPa / Kg/cm2

Features:

Specifications:

Title