ICON Process Controls

  •

    PROSCAN SERIES – PP, PTFE LEVEL RADAR TRANSMITTER

     

    PROSCAN SERIES - PP, PTFE LEVEL RADAR TRANSMITTER

    The ProScan Series transmitter measures the liquid level inside the tank or sump by using an all plastic (PP or PTFE) antenna or horn that sends and receives  low energy radar pulses.  The sensor is mounted to the top of the tank and the pulsed signal is reflected off the liquid surface, the echo (returned signal) is then picked up or received by the transmitters antenna. The time it takes is compared to known laws of physics (speed of light), once this is done the distance can be determined, and very accurately measured. Distance = (Speed of Light x Time Delay) / 2 The ProScan Series does not contact the process liquid and therefore is an excellent choice for applications that may be corrosive, coating, dirty, or crystallizing. The are temperature compensated over the entire range (-40260°F) and can be used on to measure liquid under pressure or vacuum. The ProScan Series is both reliable and accurate; there is no requirement for re-calibration, and virtually zero maintenance as there are no moving parts. The ProScan Series utilizes a special microprocessor technology and mapping software that allows it to be used where other non-contact level sensing products fail or go lost i.e. Ultrasonics on Foam, Vapor, Condensate or Turbulence.

    Excellent Chemical Resistance High Accuracy Suitable for Foam / Vapor

    Features:

    • All Plastic PTFE Teflon Design
    • Small Dead Band 12”
    • PP, PTFE Antenna (Horn)
    • Low Profile
    • Simple Programming
    • Suitable for Dense Foam, Vapor
    • Excellent Chemical Resistance
    • Fail Safe Diagnostics
    • Simple Configuration
    • Push Button
    • IP67 Housing
    • Epoxy Coated
    • Loop Powered/ 2 Wire
    • Visual Display Window
    Details

  • ProPulse Series All Plastic Mini Turbine Flowmeter

     

    ProPulse Series All Plastic Mini Turbine Flow Meter

    No Programming Required Excellent Chemical Resistance Perfect for Dosing / Pulsating Flows

    Features:

    • Universal Body 5 Different Flow Ranges(Flow Jets Are Field Replaceable)
    • Excellent Chemical Resistance
    • All Plastic PVDF Body, Rotor, Sapphire Bearings
    • Ultra Low Flow Ranges from 50 ml/min (.013 GPM)
    • Pressure Rating 10 bar (150 psi)
    • Pulse Output Hall Effect Sensor which converts the rotation into a square wave NPN pulse output
    • Compact - Lightweight
    • Temperature Rating -40 -120°C (-40 -248°F)
    • Barbed Hose Inlet/Outlet Connection   5/16 and 1/2 inch. 8mm, 12mm, or 3/8” Pipe Connector
    • High Accuracy & Repeatability
    • NPN Frequency Pulse Output
    Details

  • PLS Series Plastic Level Switches / Vertical / Horizontal

     

    The Levelpro PLS Series compact level switches combine low cost and reliability with fast, simple installation. The all plastic level switches contain an hermetically sealed reed switch that is actuated by magnets that are permanently bonded inside the float. They can be easily adapted to open or close a circuit based on the rising or falling of the liquid level. The switch action can be reversed by removing the float, rotating it end-for-end and replacing it on the stem. Vertical models mount internally, oriented within 45° of vertical, or select optional fittings for external mounting. Switch ratings are suitable for many solidstate control systems and small monitors or alarms. Simple relay interfaces can be used for higher current applications such as pumps and on-off valve actuators

    Areas of Applications:

    Machines / Tanks / Boilers / Corrosive Liquids / Chemical Skids / Sumps / Solvent Recovery Systems / OEM Applications

    Working Principle:

    As a direct result of rising or falling liquid a magnetic field is moved into the proximity of a reed switch causing its actuation.

    Advantages:

    • Cost Effective
    • Easy to Install
    • High / Low level Indication
    • All Plastic Design
    • Excellent Chemical Resistance
    • Horizontal / Vertical Operation
    Details

  • PGS SERIES – Plastic Gauge / Mini Pulsation Dampener

     

    Mini Pulse / Surge Suppressor Perfect for Metering Pumps Economical

     

    Features:

    • All Plastic Gauge & Isolator
    • Heavy Duty Design / Simple to Install
    • Completely Corrosion Resistant
    • Bladder Diaphragm Design
    • Red Markers Designed to Indicate Optimum Operating Range
    • Extra Large Color Display
    • Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
    • High Accuracy / ±1.5%
    • Factory Filled / Glycerin
    • Excellent Chemical Resistance
    • One-Piece Molded Design / No Assembly
    • Suitable for Corrosive Media + Slurries

    Specifications:

    Dial Diameter                                             Large 2½" Face / Big Numbers / Clear Markers Mounting                                                     Direct Mount / Bottom Connection FNPT / ½" Housing                                                       One Piece Molded Design Polypropylene / No Assembly or Filling Required Lens                                                              Polycarbonate Dial                                                               Red & Black Scale White Background / dial arc 270° Measuring Principle                                 Bourdon Tube Diaphragm / FPM (Standard) Movement                                                  SS316 / Brass / (Non Wetted) Gauge                                                          Two (2) Red Adjustable Plastic Markers Pressure Range Pointers fitted on the Bezel Connection                                                 ½" FNPT Filling                                                          Glycerin Accuracy                                                     ±1.5% F.S. Operating temperature                           Max. 160°F / 80°C Pressure Range*                                       Standard Ranges / 0-60 / 0-100 / 0-160 psi Other units available / bar / MPa / Other Scales Available (Non-Shock)

    Details

  • OBS-V SERIES – Plastic Compound / Vacuum Gauge

     

    No Filling Required Suitable for Corrosive Environments Heavy Duty Design

     

    Features:

    • Fit & Forget
    • Suitable for Corrosive Environments
    • Large 2½" Red / Black Face
    • Dual Scale
    • Heavy Duty Design
    • 3 Range Tabs / Red / Yellow / Green
    • Extra Large Color Display
    • High Accuracy / ±0.75 %
    • Factory Pre-Filled
    • Glycerin (Std) / Silicone (Opt)
    • High Impact Case Housing
    • Visual Pressure Ranges

    Specifications:

    Dial Diameter                                             Large 2½" Face / Big Numbers / Clear Markers Mounting                                                     Direct Mount / Bottom Connection Housing                                                       Polypropylene Lens                                                             High Impact Polycarbonate Dial                                                               Red & Black Scale White Background / dial arc 270° Measuring Principle                                 Bourdon Tube / SS316 / Brass Movement                                                  SS316 / Brass  Gauge                                                         Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection                                                 ¼" (M) NPT / G Type / 316 SST Filling                                                          Glycerin (Std) / Silicone (Opt) Accuracy                                                     ±0.75% Operating temperature                           Max. Working Temp / PP - 180°F Pressure Range*                                       Standard Ranges / 0-30 + 30 psi (Second Scale: kPA) Other scale available - Consult Factory

    Details

  • OBS-TT SERIES – Plastic ‘Tell-Tale’ Gauge

     

    Upset Pressure Notification Registers Pressure Spikes Suitable for Corrosive Environments

     

    Features:

    • Heavy Duty Enclosure
    • Notification of Pressure Spikes
    • Suitable for Corrosive Environments
    • Records Pressure Surges
    • Heavy Duty Design
    • 3 Range Tabs / Red / Yellow / Green
    • Extra Large Color Display
    • High Accuracy / ±0.75 %
    • Resettable
    • High Impact Casing
    • Dual Scale
    • Simple to Install
    • 316 SS ¼" NPT Connection

    Specifications:

    Dial Diameter                                             Large 2½" Face / Big Numbers / Clear Markers Mounting                                                     Direct Mount / Bottom Connection / (M) NPT / ¼" Housing                                                       Polypropylene Lens                                                             High Impact Polycarbonate Dial                                                               Red & Black Scale White Background / dial arc 270° Measuring Principle                                 Bourdon Tube / SS316 / Brass Movement                                                  SS316 / Brass  Gauge                                                         Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection                                                 ¼" (M) NPT / G Type / 316 SST Filling                                                          No Fill Accuracy                                                     ±0.75% F.S. Operating temperature                           Max. Working Temp / PP - 180°F Pressure Range*                                       Standard Ranges / 0-60 / 0-100 / 0-160 psi / kPA Other units available / bar / MPa / Other Scales Available - Consult Factory

    Details

  • OBS-R 360 Rotating Gauge and Isolator

     

    Head Rotates 360 Degrees No Filling Required Excellent Chemical Resistance

     

    Features:

    • 360 Degree Full Rotation
    • Filled Heavy Duty Design / Simple to Install
    • Completely Corrosion Resistant
    • Designed to Act as Visual Pressure Alert ex. Bag/Filter Change-Out
    • Extra Large Color Display
    • Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
    • High Accuracy / ±1.5%
    • Factory Pre-Filled
    • One-Piece Molded Design / No Assembly
    • Suitable for Corrosive Media + Slurries

    Specifications:

    Dial Diameter                             Large 2½" Face / Big Numbers / Clear Markers Mounting                                    Direct Mount / Bottom Connection / ½" Housing                                      PP / PTFE Teflon® Diaphragm / One Piece Molded Design (No Assembly or Filling Required) Lens                                             High Impact Polycarbonate Dial                                              Red & Black Scale White Background, dial arc 270° Measuring Principle                Bourdon Tube / SS316 Movement                                 SS316 / Brass Gauge                                         Red / Yellow / Green / Movable Plastic Pressure Range Pointers Fitted on the Bezel Connection                               ½" (M) / (F) NPT / G Type / Flange Filling                                        Glycerin (Std) or Silicone (Opt) Accuracy                                   ±1.5% F.S. Operating Temperature        PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Pressure Range*                     Standard range 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available bar / MPa * (Non-Shock)

    Details

  • OBS-LE SERIES – Digital LED Pressure Gauge / Transmitter / Switch

     

    Completely Corrosion Resistant Accuracy ±1% 4-20mA + 2 Relay Outputs psi / bar / MPa / Kg/cm2

     

    Features:

    • All Plastic / Gauge & Isolator
    • Heavy Duty Design / Simple to Install
    • Completely Corrosion Resistant
    • Green LED changes to Red in Upset Condition
    • Extra Large LED Display
    • Reduces Pressure Surges
    • Simple Push Button Programming
    • High Accuracy / ±1.0%
    • Visual Notification of Relay Outputs
    • No Filling Required
    • One-Piece Molded Design / No Assembly
    • Suitable for Corrosive Media + Slurries

    Specifications:

    Dial Diameter                                             Large 2½" Face / Big Numbers  Mounting                                                     Direct Mount / MNPT / FNPT / ½" Housing                                                       PVC / PP / PVDF / PTFE Diaphragm One Piece Molded Design (No Assembly) Lens                                                             Polycarbonate Dial LED - Green (Normal) / Red (Relays Active) Connection                                                 ½" (M) / (F) NPT / G Type / Flange Accuracy                                                     ±1.0% Operating temperature                           PVC 140°F / CPVC 180°F / PP 170°F / PVDF 195°F Pressure Range*                                       0-150 psi / 10 bar / (Ambient Temp) *(N0n-Shock) Output                                                        4-20mA + 2 (NPN or PNP) Relay Outputs Power Supply                                            10-30VDC SPECIFICATIONS

    Details

  • OBS-LC SERIES – Pressure Gauge & Isolator / Battery Operated

     

    One Piece Plastic Design Battery Operated > 3 Years Digital Combo Gauge + Isolator

     

    Features:

    • All Plastic Gauge & Isolator
    • No Filling Required
    • Heavy Duty Design / Simple to Install
    • Completely Corrosion Resistant
    • Extra Large LCD Display
    • Reduces Small Pressure Surges caused by
    • Water Hammer / Metering Pump Pulsations
    • Highest Accuracy in Industry / ±1%
    • One-Piece Molded Design / No Assembly
    • Suitable for Corrosive Media + Slurries
    • No Programing Required
    • PTFE Diaphragm / Standard
    • Replaceable Lithium Battery
    • Long Life > 3 Years

    Specifications:

    Dial                                                                Diameter Large 2½" Face / Big Numbers Mounting                                                     Bottom Connection / ½" Housing                                                       PP / PVDF / (PTFE Teflon®) Diaphragm Lens                                                              One Piece Molded Design / No Assembly Display                                                         Liquid Crystal Display - LCD Programming                                             Push-Button / Eprom Non-Volatile Accuracy                                                     ±1.0% F.S. Operating Temperature                          PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Connection                                                ½" (M) / (F) NPT / G Type / Flange Pressure Range*                                       150 psi / 10 bar) * (Non-Shock)

    Details

  • OBS-GO Series All Plastic Gauge Only-1/4″ SST NPT

     

    No Filling Required Suitable for Corrosive Environments High Impact Casing

     

    Features:

    • Heavy Duty Design
    • Suitable for Corrosive Environments
    • Dual Scale / Red / Black
    • Suitable for Pulsing Applications
    • 3 Range Tabs / Red / Yellow / Green
    • Extra Large Color Display
    • High Accuracy / ±0.75 %
    • Factory Pre-Filled Glycerin
    • High Impact Casing
    • Visual Pressure Ranges
    • Simple to Install
    • Perfect Mate for GI Series Isolators

    Specifications:

    Dial Diameter                                             Large 2½" Face / Big Numbers / Clear Markers Mounting                                                     Direct Mount / Bottom Connection MNPT / ¼" Housing                                                       Polypropylene Lens                                                             High Impact Polycarbonate Dial                                                               Red & Black Scale White Background / dial arc 270° Measuring Principle                                 Bourdon Tube / SS316 / Brass Movement                                                  SS316 / Brass  Gauge                                                         Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection                                                 ¼" (M) NPT / G Type / 316 SST Filling                                                          Glycerin (Std) / Silicone (Opt) Accuracy                                                     ±0.75% Operating temperature                           Max. Working Temp / PP - 180°F Pressure Range*                                       Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) (Pressures up to 1500 psi) Other units available / bar / MPa

    Details

  • OBS-DGO Series Plastic Double Sided Gauge1/4″ SST NPT

     

    Double-Sided No Filling Required Visual Pressure Range Markers Corrosion Resistant

     

    Features:

    • Heavy Duty / Double Sided
    • Suitable for Corrosive Environments
    • Dual Scales Heavy
    • Duty Design
    • 3 Range Tabs / Red / Yellow / Green
    • Large 2½" Color Display
    • High Accuracy / ±0.75 %
    • Factory Pre-Filled
    • Glycerin (Std) / Silicone (Opt)
    • Visual Pressure Ranges
    • Simple to Install
    • Perfect Mate for Plastic Isolators

    Specifications:

    Dial Diameter                                             Large 2½" Face / Big Numbers / Clear Markers Mounting                                                     Direct Mount / Bottom Connection Housing                                                       Polypropylene Lens                                                             High Impact Polycarbonate Dial                                                               Red & Black Scale White Background / dial arc 270° Measuring Principle                                 Bourdon Tube / SS316 / Brass Movement                                                  SS316 / Brass  Gauge                                                         Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection                                                 ¼" (M) NPT / G Type / 316 SST Filling                                                          Glycerin / Silicone (Opt) Accuracy                                                     ±0.75% Operating temperature                           Max. Working Temp / PP - 180°F Pressure Range*                                       Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available bar / MPa - Pressures up to 1500 psi available

    Details

  • OBS-A Series All Plastic Center Mount Gauge + Isolator

     

    Corrosion Resistant No Filling Required High Accuracy

     

    Features:

    • All Plastic Gauge & Isolator / Filled
    • Heavy Duty Design / Simple to Install
    • Completely Corrosion Resistant
    • Range Markers Act as Visual Pressure Alert
    • Extra Large Color Display
    • Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
    • Highest Accuracy in Industry / ±1.5%
    • Glycerin or Silicone (Opt)
    • No Filling Required
    • One-Piece Molded Design / No Assembly
    • Suitable for Corrosive Media / Slurries

    Specifications:

    Dial Diameter                                              Large 2½" Face / Big Numbers / Clear Markers Mounting                                                     Direct Mount / Panel Mount Housing                                                       PP / Teflon® Diaphragm - One Piece Molded Design / (No Assembly / Filling Required) Lens                                                              High Impact Polycarbonate Dial                                                               Red & Black Scale White Background / dial arc 270° Measuring Principle                                 Bourdon Tube / SS316 Diaphragm / PTFE Teflon® Movement                                                  SS316 / Brass Gauge                                                          Red / Yellow / Green / Movable Plastic Pressure Range Pointers Fitted on the Bezel Connection                                                 ½" (M) / (F) NPT / G Type / Flange Filling                                                          Glycerin / Silicone (Optional) Accuracy                                                     ±1.5% F.S. Operating temperature                           PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Pressure Range*                                       Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / (Non-Shock

    Details

Title

Copyright 2019 CB Automation Inc | All Rights Reserved
LinkedIn
Go to Top