105P/105PP NEMA 1 & 2 Pressure Switch/Miniature Tamper Proof
All-purpose miniature tamper proof switch, extremely light weight and durable construction. Has efficient Nega-Rate® Belleville disc spring sensing mechanism. Small size improves vibration and shock resistance.
Specifications
• Deadband (Differential): The deadband can be selected anywhere from the minimum indicated to a maximum of 45% of the set point.
• Electrical Connection: PVC insulated 18 AWG leads 18" long
• Pressure Connection: 1/4 NPT Male
• Temperature Range*
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +300°F (-40°C to +149°C)
• *Temperature limits change with O-Ring selection
• Shipping Weight: Approximately 3 ounces -
105P/105PP NEMA 1 & 2 Pressure Switch/Miniature Tamper Proof
All-purpose miniature tamper proof switch, extremely light weight and durable construction. Has efficient Nega-Rate® Belleville disc spring sensing mechanism. Small size improves vibration and shock resistance.
Specifications
• Deadband (Differential): The deadband can be selected anywhere from the minimum indicated to a maximum of 45% of the set point.
• Electrical Connection: PVC insulated 18 AWG leads 18" long
• Pressure Connection: 1/4 NPT Male
• Temperature Range*
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +300°F (-40°C to +149°C)
• *Temperature limits change with O-Ring selection
• Shipping Weight: Approximately 3 ounces -
Jogler Direct-Reading Level Gauges are the simplest, most reliable way to determine the level of liquid in a tank or vessel because they give you a direct view without compromising the integrity of your process system. Jogler level gauges are installed so that the liquid level in the transparent sight tube is always the same as the liquid level inside the tank or vessel.
Simple, reliable and maintenance-free Jogler level gauges are simple: the only components (not including mounting hardware) are the armored shield, the sight tubing and two self-sealing Super-Seal inserts. These products are maintenance-free because only the Teflon SuperSeal inserts and the borosilicate sight tubing are exposed to process fluids. Once the gauges are installed, they do not have to be removed and disassembled for inspection or cleaning. Standard shields are epoxy-coated carbon steel.
SuperSeal inserts for permanent, stress-free sealing All Jogler level gauges incorporate patented PTFE Teflon Super-Seal inserts, which seal on the outside diameter, not the ends, of the sight tube. Since Super-Seal inserts allow sight tube movement without leaking, stresses caused by differential expansion between the sight tube and the housing are eliminated. There are no elastomer seals or o-rings to inspect and replace: Super-Seal inserts last the life of the sight tubing -
Model ILT-6000 (Patented) Magnetostrictive Level Transmitter
Direct Insertion for Tanks or Vessels
Jogler’s ILT-6000 series level transmitter is the latest in Magnetostrictive level sensing technology designed for direct tank insertion. The ILT-6000 contains a low provile waveguide that is inserted into an isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator.
The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment. The isolation well and float are available in a variety of materials including 316SS , CPVC, Alloy 20, Titanium , Hastelloy , PP or PVDF. -
Jogler Sight Flow Indicators have exclusive, patented features for maximum safety and zero maintenance.
Jogler Sight Flow Indicators are the simplest, most reliable way to observe liquid or solids flow without compromising the integrity of your piping system. All models are available in either armored styles for protection in exposed locations or lantern styles for 360-degree viewing. Jogler flow indicators are simple: the only components (not including mounting hardware) are the armored shield or lantern cage, the sight tubing and two self-sealing Super-Seal inserts -
Jogler’s Specific Gravity Analyzers (SGAs) are a dependable and accurate method for measuring and sampling process liquid levels in virtually any application: – Acids – Caustics – Co-generation – Light Hydrocarbons – Beverages, etc.
Specific Gravity Analyzers are engineered for ease of installation and high reliability
SGAs present accurate visual verification of liquid density, can be cross-checked against temperature and are compatible with most requirements. Also, they require only small amounts of product for specific gravity measurement. SGAs are available in two standard configurations and two materials.
The hydrometer sleeve and sight tube are made of heavy wall borosilicate and the sight chamber is sealed with Teflon Super seals. The Jogler SGAs are equipped with 0.25” FNPT valves for flow control and sampling and the hydrometer is high-visibility and accurate. Installation and maintenance are engineered for simplicity and ease of use. -
Micro-DCI 53MC5000 Process Control Station
High performance multi-loop controller for any process application, from simple PID to the most complex control strategy—that’s the hallmark of the 53MC5000 controller. As the foundation of the Micro-DCI product family, it’s designed for real-time control, supervision, and process management.Integration into plantwide systems can be achieved with the E-Port Ethernet Gateway, allowing you to connect 53MC5000 Controllers to MicroMod and third-party HMI software.The 53MC5000 controller forms the basis of MicroMod’s WaterPAK series of pre-engineered packages.Features:
- A choice of one, two, or four-loop versions with expandable I/O up tp 16 DI/DO for advanced control functionality
- Easier operation of any process, with a high-visibility graphic display accommodating standard or custom operating screens
- Superior versatility—a library of standard configurations, easily modified from the front panel, can be expanded to accommodate custom control strategies
- PLC/Printer option for direct communication with most popular PLCs and serial printers
- Micro-Tools configuration software — allowing creation of user programs in a high-level language for batch and advanced control
- Standard serial communications and optional high-speed, peer-to-peer redundant networks for seamless integration into virtually any plant-monitoring system—including MicroMod’s Micro-PWC software
-
MicroMod’s SteamPAK series of pre-engineered boiler-control packages are available for steam and hot water, gas and/or oil, and single or dual fuel boilers. These ready-to-install solutions offer pre-programmed controllers and application-specific installation, startup, and operation manuals. And, now, our “plug-and-play” performance has been further enhanced for even greater simplicity and flexibility -
V100 MultiPurpose Industrial Variable Speed Drives. The V100 is available in 0.55 to 90 kW (0.75 - 125 HP) 230V and 1.1-160 kW (1.5 - 200 HP) 500V. The wall-mountable drive modules are easy to install and operate, with IP21/UL Type1 provided as standard. Options include IP54/UL Type12 and flange mounting. Standard features include built-in I/O with 3 option slots, integrated RS-485 and Ethernet-based communications, conformal coating and robust motor control features for reliability. -
MicroTorque’s adaptive control algorithms and electric braking feature allow it to quickly hit the set point with out overshoot, increasing accuracy and reducing hunting which leads to better process control, less wear and less maintenance. The patented control circuitry allows our actuator to bridge the gap between the larger high priced actuators on the market and less accurate economy models. The Duty Cycle Protection feature prevents thermal overload while providing excellent torque and response time. -
K-System isolated barriers offer an extensive range of intrinsic safety interface modules for many signals and applications – from simple isolators to highly functional modules. Furthermore, the signal conditioners are the perfect choice for general-purpose. Both types of modules can be mounted on the same Power Rail. They are clearly differentiated by color as signal conditioners have grey front labels. K-System modules are available in a variety of housing widths so they easily fit into any cabinet or enclosure. Whether one chooses the 12.5 mm KC-modules or the 20mm and 40mm KF-modules, the electrical and mechanical characteristics of the K-System are maintained. -
Z-system zener barriers are available with high density up to 2 channels / 12,5 mm width. Variants with field replaceable fuses provide a convenient means of disconnecting or open-circuiting the instrument loop without interfering with the wiring, making commissioning and maintenance operations much easier. -
The K-system comprises signal conditioners for signal transfer between control system and safe area as well as isolated barriers for communication with field devices in hazardous areas. They are preferred for these kinds of mixed applications. Wide range of isolated barriers and signal conditioners for mixed applications
Modules for universal power supply
Reduced wiring by Power Rail
Removable terminals
Many modules with marine approvals and SIL assessment -
VisuNet industrial monitors and panel PCs are constructed for process control. Each and every industrial monitor is manufactured to meet rigid safety and mechanical tolerances.
Download Data Sheet -
Glass fiber reinforced polyester (GRP) enclosure, Ex e and Ex tb certified, 110 mm x 110 mm x 65 mm, Customizable configuration of cable gland types as per specification, Installation in Zone 1, Zone 2, Zone 21 and Zone 22 -
Limit value switches signal whether the medium being monitored has reached, risen above, or fallen below, a set level (VDI/VDE Directive 3519) based on its installation height.
Examples:
Overflow / dry-run protection
Minimum-maximum control
Overspill protection -
What sets the Helios apart from other large display meters is its dual line display with super bright LEDs that can be read even in bright sunlight and up to 100 feet away. Based on Precision Digital's popular line of ProVu® digital panel meters, the Helios can satisfy a wide variety of level, flow, temperature, pressure, & weight applications. It is available with models that accept 4-20 mA, thermocouple, RTD, pulse, strain gauge, AC and DC volts and current, and even Modbus -
By combining low-cost wireless sensing with high-speed automated analytics, iTracking® Systems provide Cities, Utilities and Consulting Engineering firms with all the necessary tools for:
Inflow & Infiltration Micro Detection
Early-Warning Overflow and Backup Prevention
Dynamic Condition Assessment
Fact-Based Model Validation -
SSX/SST Safety Series Isolator & Splitter
FS Functional Safety Series, the exida® approved, SIL 3 capable 2-wire (loop powered) SSX and 4-wire (line/mains powered) SST Safety Isolators and Splitters provide isolation and signal conversion for your SIS (Safety Instrumented System) needs. These units protect and enhance loops and also pass valuable HART® data from the field transmitter to host systems and vice-versa.Isolate your SIS from your Basic Process Control System or monitoring system so disconnections or failures to these secondary systems don’t affect your safety system. FMEDA (Failure Mode Effects and Diagnostic Analysis) reports are available with the required safety data to ensure that risk reduction requirements are met.Protect your safety system from surges, spikes and transients in the field. With 1500Vrms isolating capability, the SSX/SST protects your safety I/O cards and system from the rigors of plant environments.With built-in HART pass-through technology you can rest assured that when your loops use HART transmitters that critical and valuable HART diagnostic, process, and calibration information can be read on either side of the SSX/SST. Most all other isolators block and “strip off” the HART signal.Features:
- exida certified IEC 61508:2010. exida has certified the SSX/SST for use in an SIS up to SIL 3 in monitor mode, where only the input circuit is part of the safety function. For single use mode, the SSX/SST is approved for use in an SIS up to SIL 2.
- Comprehensive FMEDA certified safety data. Upon request, exida-certified FMEDA data is provided to be used by a functional safety practitioner to determine the SST’s and SSX’s applicability in specific safety-related applications.
- Valuable HART data not lost. Both the SSX and SST pass critical HART data to asset management systems, programming devices or host systems.
- Split signals between two locations. The 4-Wire SST takes in one signal and gives you two fully isolated outputs that can be taken to two separate receiving devices. This facilitates maintenance on either output loop without losing the signal on the other output loop.
- RFI/EMI Protection. Standard 20V/m protection offered to protect against harmful effects of radio frequency and electromagnetic interference.
- Transmitter excitation. The 4-wire SST is capable of providing loop power to a 2-wire transmitter that is connected to its input.
-
Featuring a very narrow installation footprint,
miniMOORE™ Signal Isolators, Converters, Boosters
and Splitters combine multiple analog signal channels
in a rugged, easy-to-install signal conditioner.
Reliable and very economical, the miniMOORE
multi-channel family includes the model MIX 2-wire
(loop) and the model MIT 4-wire (line/mains) powered
models. The complete family delivers cost-effective
solutions for an expansive range of signal interface
applications. -
PC-Programmable Temperature
Transmitters–the TRY (isolated) and TRX
(non-isolated)–combine smart digital technology
with advanced analog operation to deliver superior
reliability, accuracy and ease of use. -
The universal SPA2 Programmable Limit Alarm Trips provide on/off control, warn of unwanted process conditions, alarm on rate-of-change and provide emergency shutdown. Very versatile, they accept a signal input from transmitters, temperature sensors and a wide array of other monitoring and control instruments -
Description The HCS HART Concentrator System converts a HART digital signal to a serial (RS-485 or RS-232) MODBUS RTU communication protocol. This allows HART transmitters and valves to interface directly with MODBUS-based monitoring and control systems. -
The ROUTE-MASTER™ RM100 Series is an intrinsically-safe fieldbus power supply system providing galvanically-isolated and fieldbusconditioned power for FOUNDATION Fieldbus or PROFIBUS PA segments. Fieldbus devices may be connected into these segments only through RMA100 or RMA100C Device Couplers, and any intrinsicallysafe segment may only contain intrinsically-safe devices, that are approved for the appropriate Zone/Division of use and the appropriate Gas hazard. -
The microNCS provides a real-time signal gateway between the field or factory floor and your control strategy. Part of Moore Industries’ NCS NET Concentrator System® family of intelligent distributed I/O, the stand-alone microNCS accepts four or eight fully-isolated analog inputs and four discrete (contact closure) inputs. It “concentrates” this data onto one or multiple communication links, and transmits it long distances back to one or more host DCS, PLC or PC-based control systems. -
The high-performance IPT 2 Current-to-Pressure (I/P) Transmitter converts a current signal to a pneumatic signal so that an electronic-based system such as a DCS, PLC, or PC can control a pneumatic actuator, valve, or damper drive. Available models accept a wide range of current inputs (4-20mA, 4-12mA, and 12-20mA) and provide a proportional pneumatic signal (3-15psig, 0.2-1 Bar, 20-100kPA, etc.). -
Moore Industries’ AC Power Transducers continuously track the amount of power being consumed by an electric device or a system. Available models accept an AC input from a “load” device such as a motor, pump or heater. They provide a proportional milliamp output for determining equipment power use and operating efficiency. They can also be used to trip automatic power control equipment to initiate energy conservation measures. Moore Industries’ AC power transducers are available in 1, 1-1/2, 2, 2-1/2, and 3 element versions. They may be either self- or externally-powered. -
The universal SPD Programmable Loop Display accepts a 4-20mA input from a process transmitter or similar analog device and indicates real-time process status in mA, percent or any designated engineering unit (EGU) on its 5-digit display. Both the process value and engineering unit (up to 5 characters) are shown on the display. -
For Explosion-Proof and General Locations The BH housing provides superior explosionproof protection for fi eld-mounted units and meets standards for enclosing indoor and outdoor electronic instruments approved for use in explosion-proof, dust-ignition proof and intrinsically-safe locations. -
CX Screwplug Immersion Heater is used primarily to heat water in tanks through natural convection currents. Typical heaters have standard 1" - 2 1/2" NPT tapered plugs. Other sizes or plugs are available on special order. -
Packaged Hot Water Boilers are 100% efficient with over 98% of the energy consumed transferred directly to the water. They come in 5 different series -
Environment One's Dual Hydrogen Control Panel (DHCP) was designed specifically for monitoring GE's scavenging seal oil generators. The DHCP contains two independent analyzers that monitor the turbine-end seal drain enlargement, collector-end seal oil drain enlargement with both valving for manual or DCS operation for checking casing purity of the generator. -
2001HSP Selfpriming analyzer sample pump - Fixed speed IndustrialSample Pump. Exceptional self-priming capabilities make the 2001HSP an ideal choice for continuous sampling. Flow rates from 6.8 to 980 ml/min depending on gear ratio and tubing size. -
The Accuron CrossFire (pat. pend.) couples WinFlume computer aided Hydraulic Structure design with high accuracy Custody Transfer technology. Today, multipath transit-time flow meters are the first choice for custody transfer applications in the oil and natural gas industry. -
VANTAGE 4700
Multipath Flowmeters. Two and three path diametrical sensor configurations are recommended for applications that do not have normal upstream straight runs to produce well developed velocity profiles -
The F114 flow computer calculates the actual ratio between two separate flows. It offers the ability to set one low ratio and one high ratio alarm value. Special precautions are taken to allow start-up problems and incorrect ratio readings for a certain period of time. Based on the location of the flow meters, a selection can be made out of six different formulas.
The display shows the ratio, alarm values, flow rate A, total A and flow rate B, total B. On-screen engineering units are easily configured from a comprehensive selection. The ratio can be displayed as 1:__ or as a percentage. -
The F073 is a versatile level indicator with continuous level monitoring feature. It offers the ability to set one low level and one high level alarm value. If desired, an ignore function can be set up to allow for an incorrect level for a certain period of time. The configuration of the Span, off-set and number of decimals is done through software functions, without any sensitive DIP-switches or trimmers. The display shows the actual level, height or percentage, alarm values, alarm messages and status.
On-screen engineering units are easily configured from a comprehensive selection.