-
TYPE 10 STANDARD/ 10H ELEVATED PRESSURE BOLTED REPLACEABLE DIAPHRAGM SEALS NOSHOK STANDARD PRESSURE BOLTED REPLACEABLE DIAPHRAGM SEALS are designed to utilize a replaceable diaphragm clamped between the metal housings. They are rated to 2,000 psi with a displacement capability of 3.2 ml. NOSHOK ELEVATED PRESSURE BOLTED REPLACEABLE DIAPHRAGM SEALS are a threaded connection, off-line seal with a replaceable diaphragm. They are designed for high pressure applications and are rated to 5,000 psi. Displacement capability is 1.4 ml.
-
The TRUNKSAFE Fault-Tolerant Fieldbus System provides a cost-effective, yet highly reliable, strategy to maintain continuous communications between field devices and a host system in the event of any single point failure (such as any open single wire) on a FOUNDATION fieldbus™ H1 or PROFIBUS PA segment.
-
The TRUNKGUARD TPS400 Power Supply enables fast and easy implementation of fi eldbus systems by providing properly conditioned power for simplex and duplex FOUNDATION fi eldbus H1 networks. TRUNKGUARD TPS400 is FOUNDATION fi eldbus registered and fully compliant with FF831-1 (the technical specifi cation for fi eldbus power supplies).
-
THERMOWELLS NOSHOK THERMOWELLS are recommended whenever the process being measured may be under pressure, is corrosive, abrasive or may be at a high velocity. They are also recommended as protection to the operator. The correct thermowell will reduce the possibility of damage to the temperature instrument and allows an instrument to be removed and replaced without shutting down and possibly draining the process. Standard thermowells are supplied with 1/2" NPSM instrument connection. The female thread will accept the 1/2" NPT male thread without galling or seizing.
-
The X4 Series is a rugged family of variable speed AC drives, built and designed for harsh industrial environments. They come with IP66/ UL Type 4X and IP55/UL Type 3R enclosures for the ultimate protection from potential hazards such as moisture, dust or extreme temperatures. Each drive features a built-in braking resistor that not only allows the X4 to handle higher inertial loads out of the box, but allow it to warm itself even in the coldest conditions.
-
The ALP Series Industrial Hose Pump is a two roller Peristaltic pump designed to handle abrasive slurries, viscous fluids, and aggressive chemicals that are normally difficult to pump with other types of positive displacement technologies. The ALP Series is an ideal choice for metering, batching and transfer applications. Peristaltic pumps are becoming the standard for hard to handle fluids such as Sodium Hypochlorite that off-gas and vapor-lock diaphragm pumps. Self priming high capacity pump can be run dry without damage. Flow rates from 1 to 40 GPM (60 to 2400 GPH). Pressures to 60 psi.
-
The ALH Series of peristatlic pumps provide high levels of volumetric accuracy for sampling and metering applications. ALH Series pumps are available in 15 different sizes that provide flow rates up to 38,000 GPH. The low maintenance, seal-less design eliminates leaks, contamination and wear problems associated with difficult to seal products. Self priming high capacity pump can be run dry without damage. Flow rates from 0.02 to 387 GPM (1 to 23,220 GPH). Pressures to 217 psi.
-
The 330 is a process monitor with universal input that is multi-functional and microprocessor based. The 330 can function as a panel meter and trip (alarm), or as a panel meter with two trips (alarms), analog transmitter and digital transmission with the addition of the RS 485 serial communications option.
-
Device Couplers provide easy and practical mechanisms for implementing fieldbus systems. TRUNKGUARD Series 300 Device Couplers (TG300) simplify the use of fieldbus devices in Zone 1 by allowing “live” access for maintenance and eliminating the need for Exd junction boxes. The TG300 Series offers our patented Automatic Segment Termination feature and a key-operated magnetic interlock which permits one spur at a time to be de-energized and worked on without shutting down the entire segment.
-
Designed for General Purpose ,Non-Incendive and Zone 2 applications, TRUNKGUARD Series 200 Device Couplers (TG200) enable fast and easy implementation of fieldbus systems by connecting multiple devices to a main fieldbus trunk in FOUNDATION fieldbus™ H1 and PROFIBUS PA networks. TG200 Device Couplers are available in models that handle four to 20 fieldbus devices.
-
Terminal Junction Boxes Glass Fiber Reinforced Polyester (GRP) GL***.T Glass fiber reinforced polyester (GRP) enclosure Ex e, Ex ia and Ex tb certified 16 enclosure size options Customizable configuration of terminals, cable entries and cable gland types as per specification Installation in Zone 1, Zone 2, Zone 21 and Zone 22 Wide range of accessories available
-
MOD30 Process Controller Family. Formerly manufactured by Kent-Taylor and ABB, the MOD control family is now solely owned and manufactured by MicroMod Automation and Controls. Our ongoing development and enhancement program carries the legacy of quality and performance into the future with state-of-the-art components and manufacturing.
-
SWIVEL ADAPTORS NOSHOK SWIVEL ADAPTORS are used with gauges and gauge valves to adjust the line of sight. The swivel adaptor rotates 360° to allow the connected instrument to be positioned in the desired direction and has temperature ratings of 15,000 psi @ 200 °F and 3,000 psi @ 1,000 °F. The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut. They feature all 316 stainless steel construction, and are standard with 1/2" NPT male process – 1/2" NPT female instrument connections. Also available with 1/4" NPT connections.