Shop

  •  

    ProPulse Series All Plastic Mini Turbine Flow Meter

    No Programming Required Excellent Chemical Resistance Perfect for Dosing / Pulsating Flows

    Features:

    • Universal Body 5 Different Flow Ranges(Flow Jets Are Field Replaceable)
    • Excellent Chemical Resistance
    • All Plastic PVDF Body, Rotor, Sapphire Bearings
    • Ultra Low Flow Ranges from 50 ml/min (.013 GPM)
    • Pressure Rating 10 bar (150 psi)
    • Pulse Output Hall Effect Sensor which converts the rotation into a square wave NPN pulse output
    • Compact - Lightweight
    • Temperature Rating -40 -120°C (-40 -248°F)
    • Barbed Hose Inlet/Outlet Connection   5/16 and 1/2 inch. 8mm, 12mm, or 3/8” Pipe Connector
    • High Accuracy & Repeatability
    • NPN Frequency Pulse Output
  •  

    PROSCAN SERIES - PP, PTFE LEVEL RADAR TRANSMITTER

    The ProScan Series transmitter measures the liquid level inside the tank or sump by using an all plastic (PP or PTFE) antenna or horn that sends and receives  low energy radar pulses.  The sensor is mounted to the top of the tank and the pulsed signal is reflected off the liquid surface, the echo (returned signal) is then picked up or received by the transmitters antenna. The time it takes is compared to known laws of physics (speed of light), once this is done the distance can be determined, and very accurately measured. Distance = (Speed of Light x Time Delay) / 2 The ProScan Series does not contact the process liquid and therefore is an excellent choice for applications that may be corrosive, coating, dirty, or crystallizing. The are temperature compensated over the entire range (-40260°F) and can be used on to measure liquid under pressure or vacuum. The ProScan Series is both reliable and accurate; there is no requirement for re-calibration, and virtually zero maintenance as there are no moving parts. The ProScan Series utilizes a special microprocessor technology and mapping software that allows it to be used where other non-contact level sensing products fail or go lost i.e. Ultrasonics on Foam, Vapor, Condensate or Turbulence.

    Excellent Chemical Resistance High Accuracy Suitable for Foam / Vapor

    Features:

    • All Plastic PTFE Teflon Design
    • Small Dead Band 12”
    • PP, PTFE Antenna (Horn)
    • Low Profile
    • Simple Programming
    • Suitable for Dense Foam, Vapor
    • Excellent Chemical Resistance
    • Fail Safe Diagnostics
    • Simple Configuration
    • Push Button
    • IP67 Housing
    • Epoxy Coated
    • Loop Powered/ 2 Wire
    • Visual Display Window
  • moore_logo_200_85 Moore Industries’ universal PSD PC-Programmable Loop Display features a large integral display that shows real-time process status in mA, percent, or any designated 5-character Engineering units (EGU). Superior Accuracy–The loop-powered PSD reads any 4-20mA signal and displays the information with phenomenal accuracy of ±0.012% of input scale. And because it requires less than 2.3 Volts, it won’t burden most loops. Simple and Versatile PC Setup Program– Using the PC software, the PSD can either be custom scaled to display in a percent or scaled directly into engineering units for indicating process measurements such as pressure, temperature, level, or fl ow. Span, zero, input range, display range, and fi ltering frequency can also be easily programmed. Our software will even capture the input range limits of the loop to provide you with the most accurate display available
  • moore_logo_200_85 Moore Industries’ AC Power Transducers continuously track the amount of power being consumed by an electric device or a system. Available models accept an AC input from a “load” device such as a motor, pump or heater. They provide a proportional milliamp output for determining equipment power use and operating efficiency. They can also be used to trip automatic power control equipment to initiate energy conservation measures. Moore Industries’ AC power transducers are available in 1, 1-1/2, 2, 2-1/2, and 3 element versions. They may be either self- or externally-powered.
  • moore_logo_200_85 The R-BOX accommodates transmitters, meters, indicators, analyzers, integrators, and many other rail-mounted instruments. The variety of available R-BOX sizes means that we have an R-BOX that will fi t your process needs. Choose from standard internal widths of 3, 6, 9, and 12 inches. Designed to meet Type 4X and IP66 ratings, the R-BOX is resistant to ultraviolet rays and chemicals. Its high-impact structure protects instruments even in harsh fi eld conditions.
  • moore_logo_200_85 The ROUTE-MASTER™ RM100 Series is an intrinsically-safe fieldbus power supply system providing galvanically-isolated and fieldbusconditioned power for FOUNDATION Fieldbus or PROFIBUS PA segments. Fieldbus devices may be connected into these segments only through RMA100 or RMA100C Device Couplers, and any intrinsicallysafe segment may only contain intrinsically-safe devices, that are approved for the appropriate Zone/Division of use and the appropriate Gas hazard.
  •  

    Ideal for Plastic Piping Quick Visual Indication Low Cost Simple Installation No Guide Rods

    Features:

    • Quick & Clear Visual Indication
    • True Union Design for Easy Installation / Removal
    • Flow Ranges / 0.02 - 880 GPM
    • Ideal for Plastic Piping Systems
    • Low Pressure Drop
    • PVC End Connections
    • Optional Limit Switches
    • Low Cost
  •   moore_logo_200_85 The UL Approved ECT-DIN 2-Wire Isolator is now available in a narrow 15mm aluminum housing. The thinner ECT-DIN 2-Wire Isolator with 15mm width retains the same General and Hazardous area approvals as the rest of the ECT family of isolators. It also has the same RFI/EMI protection and -40°C to 85°C operating temperature range. The ECT-DIN 2-Wire Isolator can be installed in hazardous locations and does not require installation in climate-controlled environments, making it perfect for more extreme locations. The rugged narrow 15mm ECT DIN 2-Wire isolator and converter with 4-20mA, 1-5V and 0-10V inputs and 4-20mA output, permits more isolators to fit in cabinets and field enclosures where installation space is limited, saving space and money.”  The ECT DIN 15mm narrow size allows more isolators to fit in cabinets and field enclosures where installation space is a premium. This is ideal for utilizing existing field mounted cabinets. The solid metal housing stands up to the continuous, daily rigors of process control and factory automation applications. An optional externally-mounted flange provides a secure mount, which ensures secure installation in high vibration environments. The ECT is UL approved Class I, Division 2, Groups A, B, C & D T4. The rugged and reliable ECT family of isolators provides versatile choices to match the type of AC or DC power available at each location. ECT-DIN 2-wire Output-Loop powered models, ECT 2-wire Input-Loop powered models, or 4-wire (Line/Mains) Powered Isolators/Converters and Splitters are also available. The complete ECT family delivers reliable signal isolation and conversion solutions for the most demanding ambient and noisy installation conditions.     Download Data Sheet
  • moore_logo_200_85 The versatile construction of the SB stainless steel enclosure makes it ideal for use with any manufacturer’s hockey-puck units. It protects all Moore Industries’ hockey-puck instruments.
  •     CX Screwplug Immersion Heater is used primarily to heat water in tanks through natural convection currents. Typical heaters have standard 1" - 2 1/2" NPT tapered plugs. Other sizes or plugs are available on special order.
  • etherm_logo_200_85 Self-regulating heating cables consist of two parallel bus wires embedded in a networked plastic heating element, doped with surrounding carbon particles. If the temperature increases during operation, the plastic expands due to molecular expansion and the distance between the carbon particles increases. Resistance increases and output drops. When it cools down, this process is reversed and output increases. This physical property provides several benefits, including the ability to overlap the self-regulating cable and installation without the requirement of a temperature cut-out device. Benefits:
    • Self-regulating with adaptable output
    • Various temperature range applications
    • High chemical resistance
    • No temperature regulation or   limiting required
    • Easy to lay and to install
    • Can be cut to length off the roll
  •  

    SENTINEL SERIES TELEMETRY TANK LEVEL MONITORING

    The Sentinel is a Cellular Tank or Sump Level Monitoring system that delivers reliable daily measurements that are both scheduled and event driven. Remote monitoring with the Sentinel is exceptionally flexible, eliminating the hassles of network infrastructures and Internet service. Instead, the Sentinel connects via a wireless signal to local cellular networks and transmits Alarms, Inventory, Battery Status and GSM Signal Strength, all of which are available through the Sentinel Cloud Based Website. The Sentinel online provides you with important data readily at your fingertips on your Computer, Tablet or Smart phone.

    Features:

    • Battery Operated - No Programming - One Button Only
    • Remote Monitoring through Cellular Networks
    • Wireless Communication  GSM or Digital Wireless Radio
    • Frequency Bands  GSM 850 / 1900 MHz WLAN
    • E-mail Reporting - Alarms, Text E-mail
    • 24/7 access to data through Cloud Based Sentinel 247TM Online
    • Battery powered up to 5 years (3 calls/day)
    • Low Monthly Cost
    • Powerful - Long Range Antenna    (Perfect For Remote Locations)
    • Access Data Via PC, Laptop, Smartphone, Tablet
    • Secure Cloud Data (password protected)
    • No Hidden Costs
    • Standard Batteries
    • Can be Mounted Directly to Top of Tank - 2" NPT
    • Eliminate Costly Emergency Fills or Pump-Outs
Go to Top