Limit value switches signal whether the medium being monitored has reached, risen above, or fallen below, a set level (VDI/VDE Directive 3519) based on its installation height.
Examples:
Overflow / dry-run protection
Minimum-maximum control
Overspill protection -
Limit value switches signal whether the medium being monitored has reached, risen above, or fallen below, a set level (VDI/VDE Directive 3519) based on its installation height.
Examples:
Overflow / dry-run protection
Minimum-maximum control
Overspill protection -
Perfect for tank level measurement and control
The FLOMOTION LM7000 provides non-contacting level measurement for a wide variety of applications in both liquids and solids. The system is composed of an ultrasonic sensor and a remote mounted controller for maximum flexibility. Easy calibration and maintenance-free performance means you can install the LM7000 rapidly and with confidence. Features:- Measurement range 33 ft (S330 sensor) or 50 ft (S500 sensor)
- Programmable 4-20mA analog output
- Menu driven programming
- 4-20mA and relay outputs
- 3 or 6 SPDT relays for alarms and external control
- Sensor is weather resistant and safe against submersion (NEMA 6P)
- Automatic temperature compensation
- Datalogging
- Single or Dual Sensor
-
LP 200 SERIES Plastic Pressure Sensor / Transmitter
The Levelpro LP200 was designed to measure Pressure or Level within industry's most demanding corrosive process applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a threaded process pipe tee fitting. For level measurement applications the LP200 can simply be mounted into the side of the tank utilizing a NPT / G type bulkhead or weld-o-let fitting. The LP200 implements a state of the art ceramic measuring principle that changes the physical pressure which equates to no more than a few microns into a linear electronic signal that can be measured. This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm resulting in high resistance to alternating loads and long-term durability...exactly what is required for tough industrial applications.
Typical Applications:
- Chemicals / Acids / Bases
- Tank Level
- Industrial Process Piping
- Vapor Pressure
- Leak Detection Equipment
- Environmental Protection
- Scrubbers Filter / Strainer Notification
- Leachate Collection
- Weir Flow
- Scrubbers
Features:
- PP / PVDF / 316 SST Body
- Pressure Range / 0 - 225 psi
- Output / 4-20mA / 2 Wire Loop Powered
- NPT / G / Union Type Connection
- Ceramic Sensing Diaphragm
- Plug & Play Design
- High Accuracy
- No Programming Required
- Temperature Compensated
- Excellent Chemical Resistance
Specifications:
- Range 0 - 225 psi / (Other Ranges Available)
- Medium Gas & Liquid
- Accuracy 0.2% or 0.5% F.S
- Working pressure 18 - 36V DC
- Output signal 4-20mA / two-wire
- Medium temp -30°C - 85°C
- Environment temp -30°C - 80°C
- Store temp -30°C - 80°C
- Temp. effect ±0.02% FS
- Pressure connection ¾" NPT / G Type / ½" Union Type
- Connection DIN Hirschminn Connector
-
LS Series PP Body Plastic Paddle Wheel Flow Transmitter
ZIRCONIUM CERAMIC SHAFT / BEARINGS ALL PLASTIC CONSTRUCTION RETROFITS into SIGNET® TYPE FITTINGS
Features:
- Industry’s Highest Accuracy-0.75%
- Excellent Chemical Resistance, PP/PVDF, PFA, Ceramic
- Sensor Body Material PVDF / PP
- Rotor Material PFA (Teflon)
- Shaft and Bearings Zirconium Ceramic (Zr02)
- O-ring Material FKM (Viton) / EPDM optional
- Size Range ½” - 24” • Measuring Flow Range (0.33 Ft/Sec To 26 Ft/Sec)
- Excellent For Low Or High Temperatures -20 To 90°C (-4 To 194°F)
- NEMA 4X (IP65) Or NEMA 6 (IP68) Rating
- Extra Long Lasting PFA Paddle Assembly (Zirconium Ceramic Shaft & Bearings-Standard)
- Double FPM O-Ring Seal
- High Pressure Rating (Up To 200 Psi)
- Frequency Output -18.5Hz /Ft/Sec
- NPN Pulse Output
- Supply Voltage 5 to 24Vdc
- Electrical Connection DI Mini-Connector 43650-A (IP65) , Electrical Cable (IP68)
- Cable Type 3 conductor + shield 26AWG (PVC)
- Reverse Voltage Protection Standard
- Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
- Measuring Viscosity Range 0.5 to 20 cts
- Maximum Particle Size <0.5mm2 (Max particle size)
- Maximum Operating Pressure 200psig at -30C
- Maximum Temperature 36 psi at 90C
Technical Information:
- Truflo Clamp Saddles can be used with PE, PP, PVDF PVC Pipe
- The Use of teflon tape is advised.
Materials:
- PPGF. - Polypro Glass Filled
- FPM O-ring
- 316 SSt
- Reinforced Outlet 316 SSt
-
LSS Series PP Body Plastic Paddle Wheel Flow Meter
Features:
- Up to 24" Pipe Size
- Zirconium Ceramic Rotor / Bearings
- Accuracy ±0.75% of Full Scale
- Retrofits Into Signet® Type Fittings
- Large Display Changes from Green to Red when in Alarm State
- Accuracy ± 0.75% Of Full Scale
- Pipe Size (1/2 -24 Inch)
- Heavy Duty Industrial Design
- Sensor Body Material Natural PVDF / PP
- Rotor Material PFA Teflon
- Shaft and Bearing Material Zirconium Ceramic (Zr02)
- Display Housing Material Polymide 66 +PBT + 15% Glass Filled (UL94V-0)
- Flow Rate + Totalizer (Resettable)
- Memory Mode Non-Volatile EPROM
- Flow Velocity Range (0.33 to 26 Ft/S) (0.1 To 8 M/S)
- Measuring Viscosity Range 0.5 to 20 cts
- Maximum Particle Size <0.5mm2 (Max particle size)
- Maximum Operating Pressure 200psig at -30C
- Maximum Temperature 36 psi at 90C
- Eprom Memory-Totalizer Value Will Not Be Lost
- Nema 4X (IP66) Protection • Bright LED Display Flow Units-- Litre, USGPM, M3, Ton
- 4-20mA + Two (7) Amp Relays Output (Standard)
- Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
- Pulse Output Transistor NPN Open-collector (Max. DC 60V/100ma)
- Supply Voltage 14 to 28Vdc
- Communication RS-485 Modbus RTU Mode
- Protection Class IP65/ NEMA 4X
- Corrosion Resistant All Plastic Wetted Parts-PVDF/PP Body Zirconium Ceramic Shaft-PFA Teflon Paddle
- Simple Installation
- Up to 24" Pipe Size
-
The LT260 Series is designed to measure liquid level in a wide variety of applications.
The compact, loop-powered LT260 provides continuous, non-contacting level measurement. With a measuring range of 26ft (8m) the LT260 will accommodate a wide range of applications.
The large LCD display, 4 status lights and 5 button keypad make setup and operation quick and easy.
Features:
- Low Cost
- High Accuracy
- Non-Contact Measurement
- No Moving Parts
- Compact, Lightweight Design
- Corrosion Resistant Materials
- Built-in Temperature Compensation
- Programmable 4-20mA Output
- Selectable Transducer Power Level
- Adjustable Damping
- Displays Level, Distance or Space
- Loss of Echo Indicator
- Interface this level sensor with the FLOMOTION DR5000 Chart Recorder
- Bulk Chemical Storage
- Pump Stations
- Clarifiers
- Filtration Levels
- River Level Monitoring
- Trash Rack Level Monitoring
- Waste Sump
- Tanker Truck Filling
- Water Storage Towers
- Reactors
-
The LT330 Series is designed to measure liquid level in a wide variety of applications.
The compact, loop-powered LT330 provides continuous, non-contacting level measurement. Up to 33ft (10m) range.
The large LCD display, 4 status lights and 5 button keypad make setup and operation quick and easy.
Features:
- 33ft (10m) range
- Accuracy of 0.2% with 1mm resolution
- Easy to install 2” NPT fitting
- Loop powered 4-20mA (max 750 Ω)
- 5 digit numeric LCD display
- Integral 5 button keypad
- 4 status lights
- Built-in temperature compensation sensor
- Bulk Chemical Storage
- Pump Stations
- Clarifiers
- Filtration Levels
- River Level Monitoring
- Trash Rack Level Monitoring
- Waste Sump
- Tanker Truck Filling
- Water Storage Towers
- Reactors
-
ML210 Millennium 3 Series Converter / Transmitter
For MS Series Electromagnetic Sensors. Programmable microprocessor design with "Empty Pipe Detection" for automatic zeroing of the output signals; EPROM data protection on power failure; system self-diagnostic included -
MLD-35 Series Teflon® Capacitance Level Sensor
MLD-35 Series Continuous Level Sensors are intended for level measurement of liquid and bulk solids in tanks, vessels sumps or silos, hoppers, etc. They are comprised of a housing with electronic module and a electrode that converts a capacitance signal to a current signal of 4-20mA or voltage signal (0-10V) output. The MLD series incorporates a Teflon® encapsulated measuring electrode making it suitable for corrosive chemicals and sticky polymers.Features:
- Continuous Level Measurement of Liquids or Bulk Solids up to 10 feet
- 4-20mA Loop Powered
- Supply Voltage 12-34 VDC
- Output Current 4-20mA (2-wire) / 0-10 VDC (3-wire)
- Teflon® Coated Electrode
- Excellent Chemical Resistance
- Visual indication of Function and Status of Level via two LED Lights located on housing
- Wide Selection of Electrical Connections
- Heavy Duty Design
- IP67 / IP68
- Temperature -40°C to 200°C
-
Teflon® Coated Guided Wave Radar
Continuous Liquid Level Meter
The MLR radar level meters are compact level measurement device that include a transmitter that emits microwave pulses along a rod or wire rope electrode. The pulse propagates along the electrode in the form of electromagnetic wave toward the level surface, where it is reflected and the signal wave component is returned to the receiving module of the electronic housing. The on-board circuitry measures the time of flight of electromagnetic wave and the distance to the surface level is calculated. According to the level height, the level meter output is set and the measured value is shown on the display. Radar level meters are resistant against changes in the atmosphere (pressure, temperature, dust, steam) and to changes in medium parameters (change in dielectric constant and conductivity).Features:
- Suited for Continuous Level Measurement of various Liquid / Bulk Solids / Viscous Materials
- View Measured Values on the Display
- Universal Use / Direct Mounting onto Hoppers / Silos / Tanks / Sumps
- Teflon® Coated Stainless Steel Rod or Rope
- Electrode Measuring Range up to 40m
- Explosion Proof / ATEX (Optional)
- Temperature -40C to 200C
- Pressure Steel Rod (30°C/4MPa , 85°C/2MPa , 130°C/2MPa, 160°C/1,5MPa200°C/0.3 MPa) Rope (30°C/1MPa, 85°C/0.5MPa,130°C/0.1MPa)
- Current Output (4-20mA) / HART® Protocol
- Supply voltage 18 to 36VDC
- IP67
-
The microNCS provides a real-time signal gateway between the field or factory floor and your control strategy. Part of Moore Industries’ NCS NET Concentrator System® family of intelligent distributed I/O, the stand-alone microNCS accepts four or eight fully-isolated analog inputs and four discrete (contact closure) inputs. It “concentrates” this data onto one or multiple communication links, and transmits it long distances back to one or more host DCS, PLC or PC-based control systems. -
The JP-450 is a magnetically actuated “no bleed” pneumatic point level switch for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps the switch isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly. Two JP-450’s can be coupled with a JPLR latching relay to give plug-and-play dump/fill valve control.
Features:
- No process piping or valves required (except customer pneumatic lines)
- Retrofit onto existing MLG installations
- “Snap-action” design maintains state in high-vibration environments
- Accepts filtered air or gas supply
- Field configurable (High/Low level)
- 316 Stainless Steel enclosure