ICON Process Controls

  •

    GI Series All Plastic Gauge Isolator

     

    Truflo GI Series Gauge Isolators allow inexpensive pressure gauges, or any other pressure instrument to be used in corrosive services. The upper chamber (gauge side)is filled with a stable fluid such as glycerin or silicone. A Teflon® diaphragm separates it from the lower chamber which receives the media under pressure. Customers can easily fill isolators and install their own gauges.

     

    Features:

     
    • Easy to Mount Gauges
    • No Special Equipment is Required
    • Perfect Mate for Truflo OBS Plastic Gauges
    • Provision for Fill Port
    • Housing has a Threaded Vacuum Port for Extracting any Trapped Air during the filling process
    • High Chemical Resistance
    • Choice of Body Materials for a Wide Range of Applications
    • PTFE bonded FPM dished diaphragm for High Chemical Resistance and Sensitivity
    • Heavy Duty Design for Safety
    • Small Footprint
    • Heavy Wall Connection Ports

    Specifications:

    INLET PROCESS CONNECTION :          ½" (M) / (F) NPT / BSP / G / Flange INSTRUMENT CONNECTION :              ¼" NPT / G DIAPHRAGM :                                             PTFE Teflon®

    Details

  • FES Series Heavy Duty PP Plastic Flow Switch

      The FES Series Flow Switch is designed to detect liquid Flow or Low / No Flow. The FES switch encompasses a SPST contact that can be wired to energize a device when liquid flow either exceeds or drops below the set flow rate. The FES Series is an excellent choice for corrosive liquid services, water treatment, waste treatment, liquid pumping and process control systems. The FES Flow Switch can control devices such as pumps, motorized valves and alarm devices.
    • Excellent Pump Protection
    • Corrosion Resistant
    • All Plastic Rugged Design

    Featues:

    • All Plastic Construction
    • In-Line Design / Insertion Style
    • NEMA 4X Enclosure
    • Corrosion Resistant PP Body / Paddle ½" - 8" Pipe / Tee / Saddle
    • Heavy Duty Rugged Design
    • Excellent Chemical Resistance
    • Easy to Install
    • Can be Easily Changed from Normally Open to Normally Closed

    Specifications:

    Body + Thread Paddle Assembly     PP Installation Fitting                              PP / PVC (Optional) O-Ring                                                  Viton® Max. Working Pressure                     150 psi / 10 bar Max. Working Temperature             PP 80°C (NON SHOCK) Max. Contact Current                        1.5A Max. Power Supply                                      200VDC / 250VAC Max. Power                                         50W Contact                                                NO / NC Adjustable Electrical Connections                     DIN 43650A (ISO 4400) socket Opt. Cable Output Socket with Protection Class                                IP65 / NEMA 4X
    Details

  • DELTA-P Series Plastic Differential Pressure Relay Switch / Gauge

      Truflo Delta-P Series is industry's first all-plastic corrosion resistant differential pressure gauge and relay switch. The DPG measures the differential pressure between the upstream port or (High) and downstream port (Low) to provide indication and notification of a filter/strainer element (change, clean or replace), pump (choked flow), valve (cavitation) or tank (level). The pressure difference in turn acts on a piston/magnet assembly within the Truflo device activating the programmable latching relay switch which can be used for Alarm Notification, Pump or Valve Shut-Off.
    • Perfect for Basket Strainer / Bag Filter Notification
    • Excellent Chemical Resistance
    • Relay Output

    Featues:

    • All Plastic Design / Glass Filled Ryton
    • Corrosion Resistant
    • NEMA 4X Rugged Enclosure
    • Liquid Crystal Display
    • Pressure Range / 0-225 psi
    • Easy to Program Relay Set-Point
    • psi or bar Pressure Scale
    • Small Footprint / 2" Diameter
    • Easy to Install
    • EPROM Memory / Retains Set-Point / Criteria
    • Low Power Detection Feature
    • Actual Pressure Difference Displayed on Screen
    • Manual Override Function
    • Programmable Time Intervals / Relay Activation

    Specifications:

    Dry Relay Contact                        0.5 AMP at 24VDC (N/O) Output Body Diameter                             2" Operating Temperature           -20 - 60°C / 4-140°F Supply Power                              24VDC Accuracy                                       ± 0.5% Maximum Inlet Pressure          225 psi / 5 bar Enclosure                                     NEMA 4X / Ryton PPS

    Details

  • Delta-P Series Digital Pressure Differential Gauge + Relay

     

    Perfect for Basket Strainer / Bag Filter Notification Excellent Chemical Resistance Relay Output

     

    Features:

    • All Plastic Design / Glass Filled Ryton
    • Corrosion Resistant
    • NEMA 4X Rugged Enclosure
    • Liquid Crystal Display
    • Pressure Range / 0-225 psi
    • Easy to Program Relay Set-Point
    • psi or bar Pressure Scale
    • Small Footprint / 2" Diameter
    • Easy to Install
    • Eprom Memory / Retains Set-Point / Criteria
    • Low Power Detection Feature
    • Actual Pressure Difference Displayed on Screen
    • Manual Override Function
    • Programmable Time Intervals / Relay Activation

    Specifications:

    Dry Relay Contact                                      0.5 AMP at 24VDC (N/O) Output Body Diameter                                            2" Operating Temperature                           -20 - 60°C / 4-140°F Supply Power                                             24VDC Accuracy                                                     ±0.5% Maximum Inlet Pressure                        225 psi / 5 bar Enclosure                                                   NEMA 4X / Ryton PPS

    Details

  • CFL SERIES Continuous Level Float Measurement

     

    CFL SERIES Continuous Level Float Measurement

    The CFL Series Continuous Float Level Transmitter uses a plastic float that contains a magnet inside, the linear movement is in direct relation to the liquid level being measured. The movement of the float excites the divider circuit that is located inside of the stem which is then converted into a analog 4-20mA output signal.

    Features:

    • Wetted materials PP / PVC / PVDF / 316 SS
    • Tank Measurement up to 10 ft High
    • Excellent Chemical Resistance
    • Suitable for corrosive acids / bases
    • Easy Installation
    • Two-wire 4-20mA Output
    • Epoxy Coated Junction Box
    • 2" NPT Connection
    • Suitable for Corrosive Non-Coating Liquids
    • Temperature max 316SS/140°C , PP/60°C, PVDF/110°C
    • Pressure 75psi

    Notes:

    Select the proper float according to the working Temperature / Pressure / Chemical Service

    Pressure: The maximum pressure for plastic models is 75 psi / SS float is 580 psi

    Viscosity: For viscous liquids, it is recommended to choose a float with a large diameter and low density to overcome the surface tension

    Alcohol and Oil etc: 316SS for food industry applications

    Details

  • BAG “BIG ASS” Series Pressure Gauge and Isolator

     

    Excellent Corrosion Resistance  No Assembly Required  No Filling Required

     

    Features:

    • All Plastic (Gauge & Isolator) / Filled
    • Heavy Duty Design / Simple to Install
    • Completely Corrosion Resistant
    • Designed to Act as Visual Pressure Alert
    • Extra Large Color Display
    • Reduces Pressure Surges / Metering Pump Pulsations
    • Highest Accuracy in Industry / ±1.5%
    • Glycerin Filled or Silicone (Opt)
    • One-Piece Molded Design
    • Suitable for Corrosive Media + Slurries

    Specifications:

    Dial Diameter                        Large 3" Face / Big Numbers / Clear Markers Mounting                                Direct Mount / Bottom Connection / ½" Housing                                   Polypropylene / PTFE Teflon® Diaphragm / One Piece Molded Design / No Assembly or Filling Required Lens                                          High Impact Polycarbonate Dial                                           Red & Black Scale White Background, dial arc 270° Measuring Principle              Bourdon Tube Teflon® Diaphragm Movement                                SS316 / Brass (Non Wetted) Gauge                                        Optional / Red / Yellow / Green / Movable Plastic Markers - Pressure Range Pointers Fitted on the Bezel Connection                               ½" (F) / (M) NPT / G Type / Flange Filling                                        Glycerin or Silicone (Opt) Accuracy                                   ±1.5% Operating temperature          PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Pressure Range*                      Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / bar / MPa / Other Scales Available - Consult Factory *(Non-Shock)

    Details

  • 100 SERIES Continuous Submersible Level Transmitter

     

    100 SERIES Continuous Submersible Level Transmitter

    Continuous Level Sensor Works on Foam / Vapor / Turbulence Excellent Chemical Resistance All Plastic Design PTFE Teflon® Shielded Cable

    The 100 Series Transmitter is designed for Continuous Level Measurement of Aggressive Liquid Media.
    Excellent for Tanks / Sumps / Large (100') / Small (12") The Solution to Tough Applications where Ultrasonic Sensors Simply DO NOT WORK! No Lost Signals

    Applications:

    Sewage
    • Foam / Vapor / Turbulence / Condensate
    • Waste Water Treatment
    • Leachate Collection
    • Waste Sumps or Pits
    • Chemical Dosing
    • Inventory Management
    Aggressive media
    • Acids + Bases
    • Bulk Chemicals
    • Chemical Day Tanks
    • Plating Tanks
    • PH Control Tanks
    • Storage Tank Monitoring

    Features:

    • Suitable for Corrosive Chemicals
    • Built in Weight / Eliminates Floating
    • Excellent Long Term Stability
    • High Accuracy
    • Flush Sensor / Non Clogging Design
    • Heavy Duty PTFE Cable / 5m / 10m / 15m Length - Other Lengths Available
    • Excellent for Foam / Vapor / Condensate
    • Ceramic Sensing Diaphragm
    • Heavy Duty Rugged Design
    • No Moving Parts
    • Automatic Temperature Compensation
    • Pressure measurement for Tanks / Sumps up to 100ft range
    • Output 2-wire/4-20Ma loop powered / HART / RS485 / Voltage
    Details

Title

Copyright 2019 CB Automation Inc | All Rights Reserved
LinkedIn
Go to Top