ICON Process Controls

  •

    OBS-2VU Series Double Sided All Plastic Gauge + Isolator

     

    One Piece / Double-Sided Design No Filling or Assembly Required Adjustable Range Markers

    Features:

    • Industry's First All Plastic Double Sided Gauge
    • Heavy Duty Rugged Design
    • Completely Corrosion Resistant
    • Designed to Act as Visual Pressure Alert
    • Extra Large Color Display
    • Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
    • Highest Accuracy in Industry / ±1.5%
    • Factory Filled / Glycerin or Silicone (Opt)
    • Dual Scale / psi/kPA / psi/bar (Opt)
    • One-Piece Molded Design
    • Suitable for Corrosive Media + Slurries

    Specifications:

    Power Supply                                24VDC Output                                            SPST(Std) or PNP/NPN (Opt) Medium Density                          > 0.6g/cm3 Operation Point                           Vertically inserted approx 1" (25mm) Oscillation Starting Time          About 3mm Response Time                            About 1 seconds Output                                           DC 30V /3A Hysteresis settings                     About 3mm Relay Delay Time                       1~505 Power Consumption                 < 1W Process Connection                  ¾" NPT/G Thread Electrical Connector                 M20x 1.5 (Electriccoated cable: 6-8mm) Material to Contact Liquid      316 SS Coated PTFE Teflon® Electrical Connection               Gland M16 x 1.5 (standard)

    Details

  • OBS Series Pressure Gauge and Isolator

     

    All Plastic Design No Filling Required Excellent Chemical Resistance Pressure Range Markers

     

    Features:

    • All Plastic / Gauge & Isolator / Filled
    • Heavy Duty Design / Simple to Install
    • Completely Corrosion Resistant
    • Designed to Act as Visual Pressure Alert for Bag / Filter Change-Out
    • Extra Large Color Display
    • Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
    • Highest Accuracy in Industry / ±1.5%
    • No Filling Required
    • Glycerin Fill or Silicone (Opt)
    • One-Piece Molded Design (No Assembly)
    • Suitable for Corrosive Media + Slurries

    Specifications:

    Dial Diameter                         Large 2½" Face / Big Numbers / Clear Markers Mounting                                 Direct Mount / Bottom Connection / ½" Housing                                    PVC / CPVC / PP / PVDF / PTFE Teflon® Diaphragm / One Piece Molded Design Lens                                           High Impact Polycarbonate Dial                                            Red & Black Scale White Background, dial arc 270° Measuring Principle               Bourdon Tube Diaphragm / Teflon® Movement                                 SS316 / Brass / (Non Wetted) Gauge                                         Red / Yellow / Green / Movable Plastic Pressure Pressure Markers Connection                                ½" (M) / (F) NPT / G Type / Flange Filling                                         Glycerin or Silicone (Opt) Accuracy                                    ±1.5% F.S. Operating Temperature          PVC - 140°F / CPVC - 180°F / PP - 175°F PVDF - 225°F Pressure Range                         Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / bar / MPa / Other Scales (Non-Shock)

    Details

  • NC-30 Series Non-Contact Liquid Level / Flow Switch

      The NC30 Non-Contact liquid Level / Flow Sensor has been designed using high frequency technology to sense the presence of liquid / conductive / non conductive Suitable for Non-Metalic Tubing / Tanks / Drums / Pipe
    • Non-Contact
    • Senses through wall
    • Relay Output
    • Conductive and Non-Conductive Liquids

    Featues:

    • All Plastic PP Design
    • Non-Intrusive Liquid Level / Flow Detection through Plastic or Fiberglass Walls
    • Small Footprint / Easy to Install
    • LED Display
    • M12 Disconnect or Fixed Cable Connector
    • Fits on ½"- 2" Diameter Pipe / Sch 40 / 80
    • Senses up to 0.3" / (8mm) Wall Thickness

    Specifications:

    Supply voltage                                             6 -30VDC Supply current                                            Output type / Pulse     Max. 0.6 / 7mA (OFF / ON State)                                                                        Output type / S - Relay  Max. 0.6mA (OFF State) Switched current (Min / Max)                Output type / Pulse   100mA                                                                        Conductive liquids 0.3" (8mm)                                                                        Non-conductive liquids 0.11" / (3 mm) Ambient temperature range                    -20 / +80°C Temperature tube/vessel surface           -20 / +90°C Housing material                                       Plastic (PP) Protection class                                          NEMA 4X / IP67 Cable Connection                                      PVC Weight (including 2 m cable)                 Approx. 60 g
    Details

  • NC-15 / NC-25 SERIES Non-Intrusive Flow / Level Switch

     
    • All Plastic Design
    • Excellent Chemical Resistant
    • No Pressure Drop

    Featues:

    • Senses Liquid through Tubing
    • Tubing Size ¼" to ½"
    • Flow / No Flow
    • Non-Intrusive
    • Air Bubble Detection
    • All Plastic Design
    • Simple to Install
    • Heavy Walled Tubing / Up to 0.062"
    • Lightweight
    • Very Accurate / Sensitivity Adjustment
    • Perfect for Dosing or Metering Pumps

    Specifications:

    Applicable Pipes Size                                3/8 - ½" / (7 to 13 mm) Materials                                                     PolyCarbonat Wall thickness                                           0.62" Sensing Object                                          Liquid Sensing methods                                      Electrostatic Capacitive  / Photoelectric Repeat Accuracy                                       ±0.2 mm max. Power Supply                                            12 to 24VDC /10% max. ripple / (10.8 to 30VDC) Current Consumption                             12mA max. Relay Output                                             Load current /NPN / PNP (100mA max) Residual voltage 1V max. (Load current: 100mA Indicators                                                  Detection indicator (orange) Ambient Temperature Range               Operating: 0 to 55°C (with no icing or condensation), Storage: -10 to 65°C (with no icing or condensation) Ambient Humidity Range                     Operating/Storage: 25% to 85% (with no condensation)
    Ambient Humidity Range                     Operating/Storage: 25% to 85% (with no condensation) Temperature Influence                          ±4 mm of detection level at 23°C in the temperature Range of 0 to 55°C (with pure water or 20% saline solution) Voltage Influence                                    ±0.5 mm of detection level at the rated voltage in rated voltage ±10% range Insulation Resistance                             50 M Ohm min. (at 500VDC) between current-carrying parts and case Dielectric Strength                                  500VAC, 50/60 Hz for 1 min between current-carrying parts and case Vibration Resistance                              Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock Resistance                                    Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of Protection                              IP66 (IEC) Connection Method                               Pre-wired Models (Standard cable length: 2 m) Weight (packed state)                           Approx. 70 g
    Details

  • MLR-70 Series Guided Wave Radar Level Transmitter

     

    Teflon® Coated Guided Wave Radar

    Continuous Liquid Level Meter

    The MLR radar level meters are compact level measurement device that include a transmitter that emits microwave pulses along a rod or wire rope electrode. The pulse propagates along the electrode in the form of electromagnetic wave toward the level surface, where it is reflected and the signal wave component is returned to the receiving module of the electronic housing. The on-board circuitry measures the time of flight of electromagnetic wave and the distance to the surface level is calculated. According to the level height, the level meter output is set and the measured value is shown on the display. Radar level meters are resistant against changes in the atmosphere (pressure, temperature, dust, steam) and to changes in medium parameters (change in dielectric constant and conductivity).

    Features:

    • Suited for Continuous Level Measurement of various Liquid / Bulk Solids / Viscous Materials
    • View Measured Values on the Display
    • Universal Use / Direct Mounting onto Hoppers / Silos / Tanks / Sumps
    • Teflon® Coated Stainless Steel Rod or Rope
    • Electrode Measuring Range up to 40m
    • Explosion Proof / ATEX (Optional)
    • Temperature -40C to 200C
    • Pressure  Steel Rod (30°C/4MPa , 85°C/2MPa , 130°C/2MPa, 160°C/1,5MPa200°C/0.3 MPa) Rope (30°C/1MPa, 85°C/0.5MPa,130°C/0.1MPa)
    • Current Output (4-20mA) / HART® Protocol
    • Supply voltage 18 to 36VDC
    • IP67
    Details

  • MLD-35 Series Teflon® Capacitance Level Sensor

     

    MLD-35 Series Teflon® Capacitance Level Sensor

    MLD-35 Series Continuous Level Sensors are intended for level measurement of liquid and bulk solids in tanks, vessels sumps or silos, hoppers, etc. They are comprised of a housing with electronic module and a electrode that converts a capacitance signal to a current signal of 4-20mA or voltage signal (0-10V) output. The MLD series incorporates a Teflon® encapsulated measuring electrode making it suitable for corrosive chemicals and sticky polymers. 

    Features:

    • Continuous Level Measurement of Liquids or Bulk Solids up to 10 feet
    • 4-20mA Loop Powered
    • Supply Voltage 12-34 VDC
    • Output Current  4-20mA (2-wire) / 0-10 VDC (3-wire)
    • Teflon® Coated Electrode
    • Excellent Chemical Resistance
    • Visual indication of Function and Status of Level via two LED Lights located on housing
    • Wide Selection of Electrical Connections
    • Heavy Duty Design
    • IP67 / IP68
    • Temperature -40°C to 200°C
    Details

  • LSS Series PP Body Plastic Paddle Wheel Flowmeter

     

    LSS Series PP Body Plastic Paddle Wheel Flow Meter

    Features:

    • Up to 24" Pipe Size
      • Zirconium Ceramic Rotor / Bearings
      • Accuracy ±0.75% of Full Scale
      • Retrofits Into Signet® Type Fittings
    • Large Display Changes from Green to Red when in Alarm State
    • Accuracy ± 0.75% Of Full Scale
    • Pipe Size (1/2 -24 Inch)
    • Heavy Duty Industrial Design
    • Sensor Body Material Natural PVDF / PP
    • Rotor Material PFA Teflon
    • Shaft and Bearing Material Zirconium  Ceramic (Zr02)
    • Display Housing Material Polymide 66 +PBT + 15% Glass Filled (UL94V-0)
    • Flow Rate + Totalizer (Resettable)
    • Memory Mode Non-Volatile EPROM
    • Flow Velocity Range (0.33 to 26 Ft/S) (0.1 To 8 M/S)
    • Measuring Viscosity Range 0.5 to 20 cts
    • Maximum Particle Size  <0.5mm2 (Max particle size)
    • Maximum Operating Pressure 200psig at -30C
    • Maximum Temperature 36 psi at 90C
    • Eprom Memory-Totalizer Value Will Not Be Lost
    • Nema 4X (IP66) Protection • Bright LED Display Flow Units-- Litre, USGPM, M3, Ton
    • 4-20mA + Two (7) Amp Relays Output (Standard)
    • Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
    • Pulse Output Transistor NPN Open-collector (Max. DC 60V/100ma)
    • Supply Voltage 14 to 28Vdc
    • Communication  RS-485 Modbus RTU Mode
    • Protection Class IP65/ NEMA 4X
    • Corrosion Resistant All Plastic Wetted Parts-PVDF/PP Body Zirconium Ceramic Shaft-PFA Teflon Paddle
    • Simple Installation
    Details

  • LS Series PP Body Plastic Paddle Wheel Flow Transmitter

     

    LS Series PP Body Plastic Paddle Wheel Flow Transmitter

    ZIRCONIUM CERAMIC SHAFT / BEARINGS ALL PLASTIC CONSTRUCTION RETROFITS into SIGNET® TYPE FITTINGS

    Features:

    • Industry’s Highest Accuracy-0.75%
    • Excellent Chemical Resistance, PP/PVDF, PFA, Ceramic
    • Sensor Body Material PVDF / PP
    • Rotor Material PFA (Teflon)
    • Shaft and Bearings  Zirconium Ceramic (Zr02)
    • O-ring Material FKM (Viton) / EPDM optional
    • Size Range ½” - 24” • Measuring Flow Range (0.33 Ft/Sec To 26 Ft/Sec)
    • Excellent For Low Or High Temperatures -20 To 90°C (-4 To 194°F)
    • NEMA 4X (IP65) Or NEMA 6 (IP68) Rating
    • Extra Long Lasting PFA Paddle Assembly   (Zirconium Ceramic Shaft & Bearings-Standard)
    • Double FPM O-Ring Seal
    • High Pressure Rating (Up To 200 Psi)
    • Frequency Output -18.5Hz /Ft/Sec
    • NPN Pulse Output
    • Supply Voltage 5 to 24Vdc
    • Electrical Connection  DI Mini-Connector 43650-A (IP65) , Electrical Cable (IP68)
    • Cable Type  3 conductor + shield 26AWG (PVC)
    • Reverse Voltage Protection  Standard
    • Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
    • Measuring Viscosity Range 0.5 to 20 cts
    • Maximum Particle Size  <0.5mm2 (Max particle size)
    • Maximum Operating Pressure 200psig at -30C
    • Maximum Temperature 36 psi at 90C
    CLAMP SADDLES & TEES LSS + LS Insertion Fittings Truflo offers to the flow market the most complete range in clamp saddles, up to 16”  

    Technical Information:

    • Truflo Clamp Saddles can be used with PE, PP, PVDF PVC Pipe
    • The Use of teflon tape is advised.

    Materials:

    • PPGF. - Polypro Glass Filled
    • FPM O-ring
    • 316 SSt
    • Reinforced Outlet 316 SSt
    Details

  • LP 200 SERIES Plastic Pressure Sensor / Transmitter

     

    LP 200 SERIES Plastic Pressure Sensor / Transmitter

    The Levelpro LP200 was designed to measure Pressure or Level within industry's most demanding corrosive process applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a threaded process pipe tee fitting. For level measurement applications the LP200 can simply be mounted into the side of the tank utilizing a NPT / G type bulkhead or weld-o-let fitting. The LP200 implements a state of the art ceramic measuring principle that changes the physical pressure which equates to no more than a few microns into a linear electronic signal that can be measured. This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm resulting in high resistance to alternating loads and long-term durability...exactly what is required for tough industrial applications.

    Typical Applications:

    • Chemicals / Acids / Bases
    • Tank Level
    • Industrial Process Piping
    • Vapor Pressure
    • Leak Detection Equipment
    • Environmental Protection
    • Scrubbers Filter / Strainer Notification
    • Leachate Collection
    • Weir Flow
    • Scrubbers

    Features:

    • PP / PVDF / 316 SST Body
    • Pressure Range / 0 - 225 psi
    • Output / 4-20mA / 2 Wire Loop Powered
    • NPT / G / Union Type Connection
    • Ceramic Sensing Diaphragm
    • Plug & Play Design
    • High Accuracy
    • No Programming Required
    • Temperature Compensated
    • Excellent Chemical Resistance

    Specifications:

    • Range 0 - 225 psi / (Other Ranges Available)
    • Medium Gas & Liquid
    • Accuracy 0.2% or 0.5% F.S
    • Working pressure 18 - 36V DC
    • Output signal 4-20mA / two-wire
    • Medium temp -30°C - 85°C
    • Environment temp -30°C - 80°C
    • Store temp -30°C - 80°C
    • Temp. effect ±0.02% FS
    • Pressure connection ¾" NPT / G Type / ½" Union Type
    • Connection DIN Hirschminn Connector
    Details

  • ITC 8000 SERIES – UNIVERSAL CONTROLLER -72 Inputs

     

    ITC 8000 SERIES - UNIVERSAL CONTROLLER - 72 Inputs

    The ITC series advanced controllers and recorders have been designed for to handle and control advanced industrial applications.

    Applications:

    • Temperature
    • Flow
    • Pressure
    • PH
    • Level
    • Redox
    • Humidity
    • Current

    Features:

    Trending Diagrams
    Universal Data Logger / Controller / Display ITC 8000 Series 1.5 GB for data! The ITC series data loggers can record channels at a speed of 10 samples per second. It has 1.5 GB built-in flash memory intended for data registration. .
     
    DAQ Manager
    To manage large amounts of data we have designed a software package that is free of charge. The software converts the data into easy viewing graphs and tables, and can provide group measurement results, create reports and export data into other files. Its fully functional free version can be downloaded from our website or ordered as a payable CD-ROM version.
     
    Color LCD Touchscreen
    The color touchscreen allows for easier and more efficient use of the device The display reacts accurately to even the slightest touch. The ITC also allows for the use of a traditional keyboard and a USB mouse
     
    Use Java applets
    It is possible to create your own website or use one of the templates included in ITC series. Applications such as tank level via with bar graphs, flow meters indicating flow speed or total liquid flow, a pressure gauge indicating process pressure...all are possible with the ITC series This solution makes monitoring of the entire system much more transparent and simple to use.
     
    Measure / Recalculate / Control and Display
    Calculate the data according to your own requirements; one result can be used as an argument of another action. An example, current measurement from 8 channels and voltage from 8 channels cross checked against the total power from 8 items being measured. All data can be visualized in a range of ways: as numerical values, quasi-analog indicators, phasor charts, horizontal or vertical charts, horizontal or vertical bars.
    Manage a Developed Network of Devices
    For more demanding customers with many needs we have prepared the Advanced Communication Module (ACM). This module includes interfaces such as: Ethernet, USB Host, RS-485 and RS-485 shared with RS-232. All the Modbus interfaces can work in both master and slave mode. Through the utilization of an Ethernet link the user can monitor operation of the entire system via the Internet from anywhere in world, via an INTERNET browser. In addition the data can be monitored via the RS-485 interface along with PC software.

     

    Specification:

    • Power Supply:  19 to 50VDC , 16 to 35VAC , 85 to 260VAC/DC
    • Inputs:    Universal, Thermocouples: J,K,S,T,N,R,B,E(PNEN), L(GOST), RTD 2-3 wire, Pt100, Pt500,Pt1000, (PN_EN),GOST Ni100, Ni500, Ni1000(PN-En), Cu50,Cu100 (Pn-83M-53852), Universal pulse 5kHz
    • Outputs:   4-20madc, SPST Rely 1A/250V
    • Communications:  RS485, Modbus RTU
    • Operating Temperature:  0°C to 50°C
    Details

  • ITC 7200 SERIES – UNVERSAL CONTROLLER- 48 Inputs

     

    ITC 7200 SERIES – UNVERSAL CONTROLLER- 48  Inputs

    The ITC series advanced controllers and recorders have been designed for to handle and control advanced industrial applications.

    Applications:

    • Temperature
    • Flow
    • Pressure
    • PH
    • Level
    • Redox
    • Humidity
    • Current

    Features:

    Trending Diagrams
    Universal Data Logger / Controller / Display ITC 7200 Series 1.5 GB for data! The ITC series data loggers can record channels at a speed of 10 samples per second. It has 1.5 GB built-in flash memory intended for data registration. .
     
    DAQ Manager
    To manage large amounts of data we have designed a software package that is free of charge. The software converts the data into easy viewing graphs and tables, and can provide group measurement results, create reports and export data into other files. Its fully functional free version can be downloaded from our website or ordered as a payable CD-ROM version.
     
    Color LCD Touchscreen
    The color touchscreen allows for easier and more efficient use of the device The display reacts accurately to even the slightest touch. The ITC also allows for the use of a traditional keyboard and a USB mouse
     
    Use Java applets
    It is possible to create your own website or use one of the templates included in ITC series. Applications such as tank level via with bar graphs, flow meters indicating flow speed or total liquid flow, a pressure gauge indicating process pressure...all are possible with the ITC series This solution makes monitoring of the entire system much more transparent and simple to use.
     
    Measure / Recalculate / Control and Display
    Calculate the data according to your own requirements; one result can be used as an argument of another action. An example, current measurement from 8 channels and voltage from 8 channels cross checked against the total power from 8 items being measured. All data can be visualized in a range of ways: as numerical values, quasi-analog indicators, phasor charts, horizontal or vertical charts, horizontal or vertical bars.
    Manage a Developed Network of Devices
    For more demanding customers with many needs we have prepared the Advanced Communication Module (ACM). This module includes interfaces such as: Ethernet, USB Host, RS-485 and RS-485 shared with RS-232. All the Modbus interfaces can work in both master and slave mode. Through the utilization of an Ethernet link the user can monitor operation of the entire system via the Internet from anywhere in world, via an INTERNET browser. In addition the data can be monitored via the RS-485 interface along with PC software.

     

    Specification:

    • Power Supply:  19 to 50VDC , 16 to 35VAC , 85 to 260VAC/DC
    • Inputs:    Universal, Thermocouples: J,K,S,T,N,R,B,E(PNEN), L(GOST), RTD 2-3 wire, Pt100, Pt500,Pt1000, (PN_EN),GOST Ni100, Ni500, Ni1000(PN-En), Cu50,Cu100 (Pn-83M-53852), Universal pulse 5kHz
    • Outputs:   4-20madc, SPST Rely 1A/250V
    • Communications:  RS485, Modbus RTU
    • Operating Temperature:  0°C to 50°C
    Details

  • ITC 650 SERIES – UNVERSAL MULTICHANNEL INDICATOR – 8 Inputs

     

    ITC 650 SERIES – UNVERSAL MULTICHANNEL INDICATOR - 8  Inputs

    The Levelpro ITC 650 Universal Data Logger can display current and record values from 8 different measuring channels. Each channel can be individually designated (described) with any engineering measuring unit. The LCD graphical display allows for visualization of the values from all 8 channels simultaneously. A significant advantage is possibility of viewing the trends in each measuring channel.

    Applications:

    • Temperature
    • Flow
    • Pressure
    • PH
    • Level
    • Redox
    • Humidity
    • Current

    Features:

    • Universal Multi-Channel Indicator
    • LCD Graphic Display Up to 8 inputs Universal / (4-20mA)
    • 2 Electronic Relay Outputs
    • 24VDC Power Supply Output: 24VDC / 200mA Will Power All 8 Channels
    • RS-485 / Modbus RTU Standard
    • Temperature / Flow / Humidity / Pressure / PH / Redox / Level / Current
    • Viewing the Trends in each of the 8 Measuring Channels
    • Any Text Description Possible: Name and Units
    • Data transfer to the Master System via RS-485
    • Password Protected 

    Specification:

    • Power Supply:  120VAC -24VDC
    • Inputs:    2 /4 /8 Inputs / 4 - 20mA
    • Relay Outputs:   2 electronic relays / NO type (ER1, ER2 with max. load 24VAC / 35VDC / 200mA
    • Communications:  RS485, Modbus RTU
    • Operating Temperature:  -10°C to +70°C
    Details

Title

Copyright 2019 CB Automation Inc | All Rights Reserved
LinkedIn
Go to Top