LP 200 SERIES Plastic Pressure Sensor / Transmitter

The Levelpro LP200 was designed to measure Pressure or Level within industry’s most demanding corrosive process applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a threaded process pipe tee fitting. For level measurement applications the LP200 can simply be mounted into the side of the tank utilizing a NPT / G type bulkhead or weld-o-let fitting. The LP200 implements a state of the art ceramic measuring principle that changes the physical pressure which equates to no more than a few microns into a linear electronic signal that can be measured. This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm resulting in high resistance to alternating loads and long-term durability…exactly what is required for tough industrial applications.

Typical Applications:

  • Chemicals / Acids / Bases
  • Tank Level
  • Industrial Process Piping
  • Vapor Pressure
  • Leak Detection Equipment
  • Environmental Protection
  • Scrubbers Filter / Strainer Notification
  • Leachate Collection
  • Weir Flow
  • Scrubbers

Features:

  • PP / PVDF / 316 SST Body
  • Pressure Range / 0 – 225 psi
  • Output / 4-20mA / 2 Wire Loop Powered
  • NPT / G / Union Type Connection
  • Ceramic Sensing Diaphragm
  • Plug & Play Design
  • High Accuracy
  • No Programming Required
  • Temperature Compensated
  • Excellent Chemical Resistance

Specifications:

  • Range 0 – 225 psi / (Other Ranges Available)
  • Medium Gas & Liquid
  • Accuracy 0.2% or 0.5% F.S
  • Working pressure 18 – 36V DC
  • Output signal 4-20mA / two-wire
  • Medium temp -30°C – 85°C
  • Environment temp -30°C – 80°C
  • Store temp -30°C – 80°C
  • Temp. effect ±0.02% FS
  • Pressure connection ¾” NPT / G Type / ½” Union Type
  • Connection DIN Hirschminn Connector