• Integral o-rings.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
The MS5000 Magnetic Flow Meter Features • Low Cost • Accuracy to +/-1% • Three sizes for 1", 2" and 3" Pipe Diameters. • Flow ranges from 2.4 to 800 GPM. • Standard pressure: 90 PSI. • Fast clamp-on installation.
• Integral o-rings.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
122P NEMA 4X, 7, 9 & 13 Pressure Switch/Internal Adjustment Compact, adjustable pressure switch for low to mid-range process applications. Efficient Nega-Rate® Belleville disc spring for set point stability and vibration resistance. Wide selection of wetted materials, 316 stainless steel body and interior, plus hermetically sealed explosion-proof electrical make this switch ideal for chemical process applications. Specifications • Electrical: Snap action electrical switch assembly listed by Underwriters’ Laboratories, Inc., FM Approval and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18” long leads
• Pressure Connection: 1/2 NPT Female
• Temperature Range*
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +250°F (-40°C to +121°C)
• Adjustment: Internal, slotted adjustment nut with range scale
• Shipping Weight: Approximately 2 pounds -
160P NEMA 4 & 13 Differential Pressure Switch
Mid-range, adjustable differential pressure switch. Efficient Nega-Rate® Belleville disc spring sensing mechanism. Weather proof enclosure and stable set points during system pressure changes makes this switch ideal for a wide variety of applications.
Specifications
• Electrical: Snap action electrical switch recognized by Underwriters’ Laboratories, Inc. and CSA International
• Electrical Connection: 1/2 NPT female conduit connection with terminal block
• Pressure Connections: 1/4 NPT Female
• *Temperature Range:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +250°F (-40°C to +121°C)
• Adjustment: Concealed wrench flat adjustment with range scale
• Shipping Weight: Approximately 3.5 pounds
*Temperature limits change with O-Ring selection -
132T NEMA 4X, 7, 9 & 13 Temperature Switch/Internal Adjustment
Compact, adjustable, direct mount temperature switch featuring the efficient Nega-Rate® Belleville disc spring for set point stability and vibration resistance. Available with all stainless steel exterior and interior construction together with a hermetically sealed, explosion-proof electrical assembly. Ideally suited for applications involving hazardous and corrosive medias or environments.
Specifications
• Electrical: Snap action electrical switch assembly listed by Underwriters’ Laboratories, Inc., FM Approval and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18" long leads
• Process Connection: 1/2 NPT Male, Direct mount
• System Pressure: 1500 psig maximum
• Proof Pressure: 2250 psig
• Adjustment: Internal, slotted adjustment nut with range scale
• Temperature Range:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o See Electrical Assembly specification sheet for Temperature Class Ratings.
• Shipping Weight: Approximately 2.5 pounds -
225P NEMA 4 & 13 Pressure Switch/Tamper Proof A sealed piston sensor with an efficient Nega-Rate® Belleville disc spring makes this switch well suited for high impulse hydraulic applications. Specifications • Deadband (Differential): The deadband can be selected anywhere from the minimum tabulated to a maximum of 45% of the set point • Electrical: Snap action electrical switch recognized by Underwriters’ Laboratories, Inc. and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18" long leads
• Pressure Connection: 1/4 NPT Female
• Temperature Range*:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +300°F (-40°C to +149°C)
*Temperature limits change with O-Ring selection
• Shipping Weight: Approximately 10 ounces -
Thin clients represent a powerful computing technology enabling users to access virtualized applications and information that runs on centralized servers. They don’t feature HDDs or fans so they are extremely economical. -
The Pepperl+Fuchs Bebco EPS 3000 series, Type Y purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. The system reduces the classification within the protected enclosure from a Division 1 to a Division 2 area.
- UL, cUL & FM classified
- Conforms to NFPA 496 and ISA 12.4 standards
- For Type Y or Type Z applications
- Enclosure volumes to 250 cu. ft.(7.08 cu. m)
Type Y purge system models - 3000 series
3003: Class I Enclosure Volumes ≤ 90 ft3 3004: Class I Enclosure Volumes ≤ 250 ft3 -
SRM FS FUNCTIONAL SAFETY RELAY MODULE
SRM Safety Relay Module provides a high level of availability for safety-critical applications and as a part of Safety Instrumented Systems (SIS). It has been developed following the IEC 61508 standard and is certified by exida for single use in Safety Instrumented Systems up to SIL 2. The SRM is a relay repeater model that accepts a single contact closure input from a logic solver trip output such as the Moore Industries STA Safety Trip Alarm or the SPA2 Programmable Limit Alarm Trip. The SRM provides three contacts per alarm input, allowing you to add alarm contacts for your safety processes without special installation or configuration. Force Guided Relay Unlike traditional multi-output off-the-shelf interposing relays, the SRM is built using a safety-rated relay with forcibly-guided contacts. This design is commonly used in control and safety systems where the logic of an application needs to detect the state of the output contacts. This is achieved by monitoring the state of the monitor contact that is also mechanically linked to the same armature as the output contacts. A Force Guided Relay avoids the possibility of having contacts stuck in the Normally Open (NO) and Normally Closed (NC) states at the same time. Also known as a Positively Guided Relay, the Force Guided Relay assures users that mechanical problems such as welded contacts won’t be missed. Rugged Housing The SRM is housed in a DIN case that can be mounted on 35mm Top-Hat DIN-rail. The aluminum housing is more rugged and durable than safety relays housed in a plastic case.Features:
- exida certified to IEC 61508. exida has certified the SRM for single use in a Safety Instrumented System up to SIL 2.
- Comprehensive FMEDA certified safety data.Upon request, exida-certifi ed FMEDA (Failure Modes, Effects and Diagnostics Analysis) data is provided to be used by a competent functional safety practitioner to determine the SRM’s applicability in specific safety-related applications.
- Visual diagnostic information. Front-panel LEDs provide diagnostic information, with three LED indicator lights that show the Input, Output and Power status. The panels provide an instant visual diagnostic on the SRM, setting users quickly see if there are any potential problems.
- Easy to install and configure. The SRM can be installed in a Safety Instrumented System with minimal wiring. Simply provide a contact closure input to the SRM and you get three process relay outputs. A monitor relay is also provided.
- Input Snubber. The Contact Closure input circuit includes an internal snubbing diode across its relay coil, meaning there is no need for external suppression across the input terminals.
- Fuse protection. Input power and all four relay outputs on the SRM are fuse protected.
- RFI/EFI protection. Enhanced RF immunity up to 20V/m, 20-1000MHz when tested to IEC 61000-4-3.
-
The universal CPT PC-Programmable Temperature
Transmitter and Signal Isolator/Converter accepts a
direct signal input from a wide array of sensors and
analog devices -
Universal TDY PC-Programmable
Temperature Transmitter features a large integral
display that shows real-time process status and valuable
loop diagnostic information. Combining smart
digital technology with advanced analog operation,
the TDY delivers superior reliability, accuracy and
ease of use. -
The BULLET WirelessHART Adapter enables new and existing wired smart HART fi eld devices, non-smart analog fi eld devices and remote HART I/O from any supplier to communicate with host applications using WirelessHART technology.
-
The 531 provides automatic PID control backup for critical loops controlled by PLC, DCS or PC systems. Unlike a single loop controller configured to sense and retransmit a control signal, which adds liability and complexity; the 531 has a simple operator interface, special parameters for control states upon host transfer or failure, and a special pass-through circuit that provides redundancy in the control loop. In HOST mode,
the control signal (4-20mA) is hard wired to pass through the 531 without degradation. In LOCAL mode, the 531 generates the CV (control) signal in AUTO or MANUAL mode. Host CV tracking enables a bumpless transfer to LOCAL mode in either LOCAL AUTO or LOCAL MANUAL mode. A special CV line sense function triggers HOST to LOCAL transfer automatically if host CV signal fails. LOCAL/HOST transfer may also be initiated by a dedicated front panel key or a contact input. The 531's setpoint may be set locally or remotely from the host, ensuring bumpless changeover to LOCAL AUTO mode. The 531 may also be operated as a manual loading station in the LOCAL MANUAL mode.