The D053 is a versatile, panel mount pressure indicator with continuous pressure monitoring feature. It offers the facility to set one low pressure and one high pressure alarm value. If desired, an ignore function can be set up to allow for an incorrect pressure for a certain period of time.
Advantages
Unique, robust IP66, IP67 (Type4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
Programming can be done by your own crew with the exact same, plain and sensible menu-driven structure like the F-Series, saving cost and irritation. Know one, know them all! -
The D053 is a versatile, panel mount pressure indicator with continuous pressure monitoring feature. It offers the facility to set one low pressure and one high pressure alarm value. If desired, an ignore function can be set up to allow for an incorrect pressure for a certain period of time.
Advantages
Unique, robust IP66, IP67 (Type4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
Programming can be done by your own crew with the exact same, plain and sensible menu-driven structure like the F-Series, saving cost and irritation. Know one, know them all! -
The F173 is a versatile level indicator featuring linearization and continuous level monitoring. In addition to the average Span, fifteen linearization points can be entered to compensate for the tank shape. The unit will interpolate between these points to increase accuracy. This linearization affects all displayed information as well as the alarm and analog outputs. With the level monitoring feature, two low and two high level alarm values can be set. If desired, an ignore function can be set up to allow for an incorrect level for a certain period of time. Up to five outputs are available to transmit alarm conditions and actual level.
The display shows the actual level, height or percentage, alarm values, alarm messages and status. On-screen engineering units are easily configured from a comprehensive selection. -
The F193 is a versatile large digit Modbus display. All displayed information and signal outputs are controlled through the Modbus ASCII / RTU communication protocol. Information of nine different tanks or products can be displayed with an automatic toggle function or can be selected by the operator. Of course, it can also be selected and locked through communication.
Further, up to four control or alarm outputs can be controlled directly or being linked to an alarm status of the nine products: an alarm message will be displayed and the related relay(s) switched. Also available is an analog output signal, fully controlled through the communication. For security reasons, all outputs can be switched-off automatically in case of a communication break-down.
The display shows the actual value, product / tank ID, measuring unit, alarm messages and status. -
152P8 NEMA 4X, 7, 9 & 13 Ultra Low Differential Pressure Switch
Ultra-low adjustable differential pressure switch. Unique construction using efficient Nega-Rate® Belleville disc spring for stable set points and high proof pressure. Explosion proof enclosure and wide range of wetted materials makes this switch especially well-suited for hazardous or corrosive atmospheres.
Specifications
• Electrical: Snap action electrical switch assembly listed by Underwriters’ Laboratories, Inc., FM Approval and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18” long leads
• Pressure Connection:
o High — 1/2 NPT Female
o Low — 1/4 NPT Female
• *Temperature Range:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -50°F to +250°F (-46°C to +121°C)
• Adjustment: Concealed wrench flat adjustment with range scale
• Shipping Weight: Approximately 4 pounds
*Temperature limits change with O-Ring selection. See Electrical Assembly specification sheet for Temperature Class Ratings. -
100TC NEMA 4X, 7, 9 & 13 Temperature Switch/Internal Adjustment
Remote mount adjustable temperature switch for use in hazardous areas. Utilizes the efficient Nega-Rate® Belleville spring mechanism and saturated vapor sensor for quick response.
Specifications
• Electrical: Snap action electrical switch assembly listed by Underwriters’ Laboratories, Inc., Factory Mutual and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18" long leads
• Process Connection: 1/2 NPT Male Remote mount. Stainless steel 6' capillary with armor jacket, 10" minimum bendable tubing and 1/2" adjustable gland nut. Optional capillary lengths available.
• Temperature Range:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o See Electrical Assembly specification sheet for Temperature Class Ratings.
• System Pressure: 1500 psig maximum
• Proof Pressure: 2250 psig
• Adjustment: Concealed wrench flat adjustment with range scale
• Shipping Weight: Approximately 5 pounds -
125P NEMA 4 & 13 Pressure Switch/Tamper Proof
Designed for high pressure pneumatic or low impulse hydraulic applications requiring a narrow deadband. Has diaphragm sensor with efficient Nega-Rate® Belleville disc spring for excellent accuracy and repeatability.
Specifications
• Deadband (Differential): The deadband can be selected anywhere from 20 psig (1.38 bar) or 8% (whichever is greater) to 45% of the set point
• Electrical: Snap action electrical switch recognized by Underwriters’ Laboratories, Inc. and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG leads 18" long
• Pressure Connection: 1/4 NPT Female
• Temperature Range*:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +300°F (-40°C to +149°C)
*Temperature limits change with O-Ring selection
• Shipping Weight: Approximately 10 ounces -
The H-System is a termination board based interface solution with stationary wiring. Modules can be mounted tool-free and replaced during operation without wiring effort. -
The SC-system is a signal conditioner product family for applications without hazardous areas on the field side.
Modules for analog and digital signals
Transmitter power supplies, isolated amplifiers, passive isolators, signal converters, and switch amplifiers
24 V DC supply
Reduced wiring effort due to Power Bus -
VisuNet operator workstations are rugged and sleek. These operator workstations are approved for; Zone 1/21 (ATEX and IECEx) , Zone 2 (ATEX) , Zone 2 (ATEX), Class I, Div 2, and are also suitable for use in the safe area , Div. 1 , Div. 2 , Class I, Div 2, Zone 2 (ATEX) , Zone 2 (ATEX), Class I, Div 2 -
Terminal Junction Boxes Glass Fiber Reinforced Polyester (GRP) GL***.T
Glass fiber reinforced polyester (GRP) enclosure
Ex e, Ex ia and Ex tb certified
16 enclosure size options
Customizable configuration of terminals, cable entries and cable gland types as per specification
Installation in Zone 1, Zone 2, Zone 21 and Zone 22
Wide range of accessories available -
Series 200P NEMA 4 & 13 Pressure Switch/Internal Adjustment
Versatile Nega-Rate® Belleville disc spring pressure switch for a wide range of applications. Series 200P (piston sensor) for hydraulic applications up to 10000 psig system pressure.
Specifications
• Electrical: Snap action electrical switch recognized by Underwriters’ Laboratories, Inc. and CSA International
• Electrical Connection: 1/2 NPT female conduit connection with terminal block
• Pressure Connection: Wetted Material 1 1/4 NPT Female
• Temperature Range*:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +300°F (-40°C to +149°C)
*Temperature limits change with O-Ring selection
• Adjustment: Concealed wrench flat adjustment with range scale
• Shipping Weight: Approximately 3 pounds -
WXH & WXL Process Duct Heaters are designed for installation in process ducts to heat air or other non-hazardous gases. Installation can be in any position: top, bottom, or side mounting. The heater is inserted into a duct through a hole and secured with suitable bolts, studs or screws.