Standard Features:
- Standard Pressure Rating with Metal Lower Housing
- Process Connection Sizes 1/4 " NPTF through 1 1/2" NPTF
- Maximum Pressure Rating 1250, 2500 PSIG (8.63, 17.25Mpa) @ 100ºF (38ºC)
-
-
Download Datasheet
Standard Features:
- Standard Pressure Rating with Metal Lower 1/4 inches through 1 inch
- All Pipe Schedules per ASME/ANSI B36.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing 1/4 inches through 1 inch
- All Pipe Schedules per ASME/ANSI B36.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
Download Datasheet
-
Standard Features:
- 1 1/2 inch (25.40mm) through 8 inch
- ASME/ANSI Flange Ratings up to 2,500lb
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Rating per ASME/ANSI B16.5
- Flange Faces (125-250Ra Spiral Finish is standard)
- Raised Face, Flat Face , Ring Type Joint and Special Flange Faces are available
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing 3 inches and larger
- All Pipe Schedules per ASME/ANSI B16.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
Download Datasheet
-
All Welded - Gasketless Design
Standard Features and Options:
- This threaded connection, off-line seal is an all welded , gasketless design.
- The displacement capacity of this series of diaphragm seal is 0.35 cubic inches utilizing a 1.9 inch (48.26mm) diameter diaphragm.
- Due to the limited displacement capability of this series , gauges with dial sizes no larger than 4 1/2 inches (114.30mm) having bourdon tube ranges no lower than 30 inches Hg/ 30 PSIG (0.207 Mpa) are applicable to this series of seal.
- The standard pressure rating is 1,000 PSIG (6.90 Mpa)
- Process Connection Sizes 1/4 inch NPTF through 1 inch NPTF
-
100J3 Diaphragm Seals for Saddle Weld Process Connections Standard Pressure Rating with Metal Lower Housings Complete with Clean-Out Option
Process Connection Sizes 3inch (80mm) and larger
All Pipe Schedules per ASME/ANSI B36.10 or B36.19 Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME B31.1 Equation "4"@ 100ºF (38ºC)
Download Datasheet
-
Standard Features:
- 1 inch (25.4mm) and larger
- Process Connections sizes 1 inch through 3 inch (25.4mm to 80mm)
- ASME/ANSI Flange Ratings up to 2500lb Maximum Working Pressure
Download Datasheet
-
Standard Pressure Ratings with Metal Lower Housings
Process Connection Sizes 1/4 NPTF through 1 1/2 NPT
Maximum Working Pressure 1000, 2000 psig ( 6.9 , 13.80 Mpa) @ 100ºF (38ºC)
Download Datasheet
-
Standard Pressure Ratings with Metal Lower Housings Process Connection Sizes 1/4" NPTF through 1 1/2" NPT Maximum Working Pressure 1000,2000 psig ( 6.9 , 13.80 Mpa) @ 100ºF (38ºC) Download Datasheet
-
Download DatasheetStandard Features:
- Instrument Connection Sizes 1/4" NPTF OR 1/2" NPTF
- Maximum Working Pressure Determined by Piping System Clamp Rating
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing 4 inches and larger
- All Pipe Schedules per ASME/ANSI B16.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
Download Datasheet