4-wire FCT can be used as a
signal isolator, converter, and/or repeater. Compact,
yet highly versatile, the FCT features field-configurable
input and output parameters, and universal
power input. The FCT is the ideal plant standard. -
4-wire FCT can be used as a
signal isolator, converter, and/or repeater. Compact,
yet highly versatile, the FCT features field-configurable
input and output parameters, and universal
power input. The FCT is the ideal plant standard. -
Series 117P Sanitary Pressure Switch
This field adjustable, compact pressure switch is intended for low- to mid-range process applications. The Tri-Clamp® compatible, polished, process connection makes this switch ideal for food, beverage and other sanitary services. Set point stability and vibration resistance are a function of the Nega-Rate® Belleville disc spring. This unit features 316 stainless steel construction, an explosion-proof/hermetically sealed electrical assembly, 18" standard free leads and SPDT or DPDT electrical forms and a wetted material surface polish of 9 - 11 micro inch Ra (0.23 - 0.28 micron Ra).†
Specifications
• Electrical: Snap action electrical switch listed by Underwriters’ Laboratories, Inc., FM Approval and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18" long leads
• Pressure Connection: 1 1/2" sanitary fitting mates with Tri-Clamp® fitting†
• Temperature Range
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +250°F (-40°C to +121°C)
• Adjustment: Internal, slotted adjustment with range scale
• Shipping Weight: Approximately 2 pounds -
ISOIL MS501 Magnetic Flowmeter with ML4-F1 Signal Converter for demanding rapid-filling , batching and dispensing applications
Features
• High sampling rate (400 samples/second) for short duration flows.
• Accuracy to +/-0.2%.
• Lower cost than flanged units.
• Six sizes from .125" to .75" Pipe Diameters.
• Flow ranges from 0.34 to 49.84 GPM.
• Standard Pressure: 230 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Wide range of process connection types; threaded, flanged, tri-clamp or compression.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
The ALP Series Industrial Hose Pump is a two roller Peristaltic pump designed to handle abrasive slurries, viscous fluids, and aggressive chemicals that are normally difficult to pump with other types of positive displacement technologies. The ALP Series is an ideal choice for metering, batching and transfer applications. Peristaltic pumps are becoming the standard for hard to handle fluids such as Sodium Hypochlorite that off-gas and vapor-lock diaphragm pumps. Self priming high capacity pump can be run dry without damage. Flow rates from 1 to 40 GPM (60 to 2400 GPH). Pressures to 60 psi. -
The R-BOX accommodates transmitters, meters, indicators, analyzers, integrators, and many other rail-mounted instruments. The variety of available R-BOX sizes means that we have an R-BOX that will fi t your process needs. Choose from standard internal widths of 3, 6, 9, and 12 inches. Designed to meet Type 4X and IP66 ratings, the R-BOX is resistant to ultraviolet rays and chemicals. Its high-impact structure protects instruments even in harsh fi eld conditions. -
Moore Industries’ durable PIH Pressure–to-Current Transmitter provides an economical solution for any process that requires a rugged instrument capable of interfacing a pneumatic device with a data acquisition / control system, controller, recorder or other electronic instrument. This compact yet powerful unit accepts most pneumatic signals (3-15psig, 0.2-1 bar, 3-27 psig etc.) and accurately converts them to a proportional 4-20mA output. -
From simple signal conditioning, to sensor-level I/O, to complex distributed intelligence, the versatile I/O EQUATION STATION ® is your solution. Even though it’s the same size as a typical process instrument, this multifunction I/O module configures to handle both routine, and one-of-a-kind, applications: -
181P NEMA 4X and 13 Vacuum Switch/Internal Adjustment
Compact, adjustable vacuum switch well suited to numerous applications. Our efficient Nega-Rate® Belleville disc spring offers superior set point stability and vibration resistance. The 181P series vacuum switch also has a selectable deadband feature which can be pre-set at the factory.
Specifications
• Electrical Listings: Switch listed by Underwriters Laboratories, Inc., CSA International and FM Approval
• Electrical Connection: 1/2 NPT male conduit connection, 18" free leads
• Pressure Connection: 1/4 NPT Female and 1/2 NPT Male
• Temperature Range*
o Ambient: -40°F to +176°F (-40°C to +80°C)
o Media: -40°F to +300°F (-40°C to +149°C)
• Adjustment: Internal, slotted adjustment wheel
• Shipping Weight: Approximately 13 ounces
* Temperature limits change with O-Ring selection -
112P NEMA 4X, 7, 9 & 13 Flanged Pressure Switch/Diaphragm Sensor
Flanged pressure switch for installations that formerly required a chemical seal with fill fluids. Reliable Nega-Rate® Belleville disc spring sensing mechanism. Redundant seals with venting between seals for alarm or indication. 316 stainless steel body and hermetically sealed, explosion-proof electrical assembly well suited for hazardous or corrosive atmospheres.
Specifications
• Electrical: Snap action electrical switch assembly listed by Underwriters’ Laboratories, Inc., FM Approval and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18” long leads
• Pressure Connection:
o 1 inch, 1/16 raised face flange per ANSI
o B 16.5 - 1998
o Class 150 (150#)
o Class 300 (300#)
Note: Customer responsible for gasket selection and installation. (Refer to Installation and Operating Instructions supplied with switch)
• Temperature Range*:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +250°F (-40°C to +121°C)
• Adjustment: Internal, slotted adjustment with range scale
• Shipping Weight: Approximately 4.5 pounds
*Limited by gasket material selected -
ISOIL MS501 MicroFlow Magnetic Flowmeter
Features
• Accuracy to +/-0.2%
• Lower cost than flanged units.
• Six sizes from .125" to .75" Pipe Diameters.
• Flow ranges from 0.034 to 49.84 GPM.
• Standard Pressure: 230 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Wide range of process connection types; threaded, flanged, tri-clamp or compression.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated. -
The F197 is a manual set-point generator. The operator enters an analog or a scaled output value or a percentage which will be transmitted as a (0)4 – 20mA or 0 – 10V DC signal to a control device. If available, the F197 can also display the measured actual process value. However, there is no direct control relationship between the input and output value. Further, one low and one high alarm value can be set with an alarm ignore function to monitor the process.
The display shows the pre-set value, actual value and status simultaneously. On-screen engineering units are easily configured from a comprehensive selection. -
4001V ANACONDA INDUSTRIAL HOSE PUMPS. Exceptional self-priming capabilities make the 4001V Series an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers.
Self priming pump can be run dry without damage. Flow rates from 1 to 330 GPH. Pressures to 100 psi.