Jogler Direct-Reading Level Gauges are the simplest, most reliable way to determine the level of liquid in a tank or vessel because they give you a direct view without compromising the integrity of your process system. Jogler level gauges are installed so that the liquid level in the transparent sight tube is always the same as the liquid level inside the tank or vessel.
Simple, reliable and maintenance-free Jogler level gauges are simple: the only components (not including mounting hardware) are the armored shield, the sight tubing and two self-sealing Super-Seal inserts. These products are maintenance-free because only the Teflon SuperSeal inserts and the borosilicate sight tubing are exposed to process fluids. Once the gauges are installed, they do not have to be removed and disassembled for inspection or cleaning. Standard shields are epoxy-coated carbon steel.
SuperSeal inserts for permanent, stress-free sealing All Jogler level gauges incorporate patented PTFE Teflon Super-Seal inserts, which seal on the outside diameter, not the ends, of the sight tube. Since Super-Seal inserts allow sight tube movement without leaking, stresses caused by differential expansion between the sight tube and the housing are eliminated. There are no elastomer seals or o-rings to inspect and replace: Super-Seal inserts last the life of the sight tubing Jogler, LLC is a Baton Rouge, Louisiana manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories. Jogler products are custom designed to meet customer specifications and manufactured to applicable ASME B31.1 and B31.3 code requirements to ensure reliable operation and maintenance free design.
-
Jogler Direct-Reading Level Gauges are the simplest, most reliable way to determine the level of liquid in a tank or vessel because they give you a direct view without compromising the integrity of your process system. Jogler level gauges are installed so that the liquid level in the transparent sight tube is always the same as the liquid level inside the tank or vessel.
Simple, reliable and maintenance-free Jogler level gauges are simple: the only components (not including mounting hardware) are the armored shield, the sight tubing and two self-sealing Super-Seal inserts. These products are maintenance-free because only the Teflon SuperSeal inserts and the borosilicate sight tubing are exposed to process fluids. Once the gauges are installed, they do not have to be removed and disassembled for inspection or cleaning. Standard shields are epoxy-coated carbon steel.
SuperSeal inserts for permanent, stress-free sealing All Jogler level gauges incorporate patented PTFE Teflon Super-Seal inserts, which seal on the outside diameter, not the ends, of the sight tube. Since Super-Seal inserts allow sight tube movement without leaking, stresses caused by differential expansion between the sight tube and the housing are eliminated. There are no elastomer seals or o-rings to inspect and replace: Super-Seal inserts last the life of the sight tubing -
LLT-1000 LIDAR LEVEL TRANSMITTER
Jogler’s LIDAR Level Transmitter is a non-contact, laser based instrument that measures the level in silos, tanks, hoppers, chutes and bunkers. With long measuring range, high accuracy and a narrow beam, the LLT-1000 can be used in many different applications to measure to different types of surface. The 4...20 mA and relay interfaces provide linear and switch point controls while the onboard USB interface provides access to comprehensive, user-friendly configuration settings. With an optional, visible aiming laser and numerous mounting flanges, the LLT-1000 is an easy to use, state of the art, level and position sensing solution. -
Model ILT-6000 (Patented) Magnetostrictive Level Transmitter
Direct Insertion for Tanks or Vessels
Jogler’s ILT-6000 series level transmitter is the latest in Magnetostrictive level sensing technology designed for direct tank insertion. The ILT-6000 contains a low provile waveguide that is inserted into an isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator.
The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment. The isolation well and float are available in a variety of materials including 316SS , CPVC, Alloy 20, Titanium , Hastelloy , PP or PVDF. -
JMG Magnetic Level Gauges are a safe, economical way to measure and control level through a wide range of process pressures, temperatures, and fluids. Each component of the JMG (chamber, float, and indicator) has been engineered to improve on existing designs to ensure reliable, maintenance-free operation right out of the crate. The JMG can be coupled with an MGT magnetostrictive level transmitter and/or any Jogler level switch to provide control outputs configured to specific customer needs.
Features:
- Wide range of materials (316/304SS, Hastelloy C, Inconel, Titanium, CPVC, others)
- ASME B31.3/B31.1 standard design
- ASME compliant extruded outlets available (Stainless Steel or Hastelloy only)
- Process pressures from full vacuum to 5000 psig
- Process temperatures from -320 to 1000F
- Fluid SG as low as 0.25
- Interface fluid DeltaSG as low as 0.025
- Measuring Lengths up to 50 ft
- Custom configurable chamber/process connection designs
- ASME Section XI welding
- ASME Code U and S stamped (optional)
- PED compliance (optional)
- Dual Chamber or Top Mount designs available (see data sheet)
-
The JP-450 is a magnetically actuated “no bleed” pneumatic point level switch for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps the switch isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly. Two JP-450’s can be coupled with a JPLR latching relay to give plug-and-play dump/fill valve control.
Features:
- No process piping or valves required (except customer pneumatic lines)
- Retrofit onto existing MLG installations
- “Snap-action” design maintains state in high-vibration environments
- Accepts filtered air or gas supply
- Field configurable (High/Low level)
- 316 Stainless Steel enclosure
-
The JS-10 (1 amp) and JS-30 (3 amp) switches are magnetically actuated point level switches for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps these switches isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly.
Features:
- No process piping or valves required
- Retrofit onto existing MLG installations
- Internal bias magnet maintains state in high-vibration environments
- Available in SPDT (one internal switch) or DPDT (two internal switches)
- Available with flying leads (no enclosure), Epoxy-coated Aluminum enclosure, or 316 Stainless Steel Enclosure
- Class I, Division 1, Groups B, C, D
- Class I, Division 2, Groups ABCD
- Class II and Class III, Groups EFG
- ATEX and IEC ratings (pending)
- Maintenance-free
-
Model MGT-6000 Magnetostrictive Level Transmitter
Jogler’s MGT-6000 series liquid level transmitter is the latest development in Magnetostrictive liquid level sensing technology that is designed exclusively for magnetic level indicators. The MGT-6000 contains a low profile waveguide that is mounted away from the level gauge chamber. This design isolates the waveguide from excessive vibration and temperature. From enhanced sensor technology, the output signal is very sensitive, fast, stable, and accurate.
The MGT-6000 can be mounted and retrofitted to most magnetic liquid level indicators -
Jogler Sight Flow Indicators have exclusive, patented features for maximum safety and zero maintenance.
Jogler Sight Flow Indicators are the simplest, most reliable way to observe liquid or solids flow without compromising the integrity of your piping system. All models are available in either armored styles for protection in exposed locations or lantern styles for 360-degree viewing. Jogler flow indicators are simple: the only components (not including mounting hardware) are the armored shield or lantern cage, the sight tubing and two self-sealing Super-Seal inserts -
Jogler’s Specific Gravity Analyzers (SGAs) are a dependable and accurate method for measuring and sampling process liquid levels in virtually any application: – Acids – Caustics – Co-generation – Light Hydrocarbons – Beverages, etc.
Specific Gravity Analyzers are engineered for ease of installation and high reliability
SGAs present accurate visual verification of liquid density, can be cross-checked against temperature and are compatible with most requirements. Also, they require only small amounts of product for specific gravity measurement. SGAs are available in two standard configurations and two materials.
The hydrometer sleeve and sight tube are made of heavy wall borosilicate and the sight chamber is sealed with Teflon Super seals. The Jogler SGAs are equipped with 0.25” FNPT valves for flow control and sampling and the hydrometer is high-visibility and accurate. Installation and maintenance are engineered for simplicity and ease of use.