Shop - Page 9 of 31 - CB Automation Inc.

OBS-DGO Series Plastic Double Sided Gauge1/4″ SST NPT

Double-Sided No Filling Required Visual Pressure Range Markers Corrosion Resistant

Features:

Heavy Duty / Double Sided
Suitable for Corrosive Environments
Dual Scales Heavy
Duty Design
3 Range Tabs / Red / Yellow / Green
Large 2½" Color Display
High Accuracy / ±0.75 %
Factory Pre-Filled
Glycerin (Std) / Silicone (Opt)
Visual Pressure Ranges
Simple to Install
Perfect Mate for Plastic Isolators

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection Housing Polypropylene Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 / Brass Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection ¼" (M) NPT / G Type / 316 SST Filling Glycerin / Silicone (Opt) Accuracy ±0.75% Operating temperature Max. Working Temp / PP - 180°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available bar / MPa - Pressures up to 1500 psi available

Details

OBS-A Series All Plastic Center Mount Gauge + Isolator

Corrosion Resistant No Filling Required High Accuracy

Features:

All Plastic Gauge & Isolator / Filled
Heavy Duty Design / Simple to Install
Completely Corrosion Resistant
Range Markers Act as Visual Pressure Alert
Extra Large Color Display
Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
Highest Accuracy in Industry / ±1.5%
Glycerin or Silicone (Opt)
No Filling Required
One-Piece Molded Design / No Assembly
Suitable for Corrosive Media / Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Panel Mount Housing PP / Teflon® Diaphragm - One Piece Molded Design / (No Assembly / Filling Required) Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 Diaphragm / PTFE Teflon® Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Pressure Range Pointers Fitted on the Bezel Connection ½" (M) / (F) NPT / G Type / Flange Filling Glycerin / Silicone (Optional) Accuracy ±1.5% F.S. Operating temperature PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / (Non-Shock

Details

OBS-2VU Series Double Sided All Plastic Gauge + Isolator

One Piece / Double-Sided Design No Filling or Assembly Required Adjustable Range Markers

Features:

Industry's First All Plastic Double Sided Gauge
Heavy Duty Rugged Design
Completely Corrosion Resistant
Designed to Act as Visual Pressure Alert
Extra Large Color Display
Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
Highest Accuracy in Industry / ±1.5%
Factory Filled / Glycerin or Silicone (Opt)
Dual Scale / psi/kPA / psi/bar (Opt)
One-Piece Molded Design
Suitable for Corrosive Media + Slurries

Specifications:

Power Supply 24VDC Output SPST(Std) or PNP/NPN (Opt) Medium Density > 0.6g/cm3 Operation Point Vertically inserted approx 1" (25mm) Oscillation Starting Time About 3mm Response Time About 1 seconds Output DC 30V /3A Hysteresis settings About 3mm Relay Delay Time 1~505 Power Consumption < 1W Process Connection ¾" NPT/G Thread Electrical Connector M20x 1.5 (Electriccoated cable: 6-8mm) Material to Contact Liquid 316 SS Coated PTFE Teflon® Electrical Connection Gland M16 x 1.5 (standard)

Details

OBS Series Pressure Gauge and Isolator

All Plastic Design No Filling Required Excellent Chemical Resistance Pressure Range Markers

Features:

All Plastic / Gauge & Isolator / Filled
Heavy Duty Design / Simple to Install
Completely Corrosion Resistant
Designed to Act as Visual Pressure Alert for Bag / Filter Change-Out
Extra Large Color Display
Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations
Highest Accuracy in Industry / ±1.5%
No Filling Required
Glycerin Fill or Silicone (Opt)
One-Piece Molded Design (No Assembly)
Suitable for Corrosive Media + Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection / ½" Housing PVC / CPVC / PP / PVDF / PTFE Teflon® Diaphragm / One Piece Molded Design Lens High Impact Polycarbonate Dial Red & Black Scale White Background, dial arc 270° Measuring Principle Bourdon Tube Diaphragm / Teflon® Movement SS316 / Brass / (Non Wetted) Gauge Red / Yellow / Green / Movable Plastic Pressure Pressure Markers Connection ½" (M) / (F) NPT / G Type / Flange Filling Glycerin or Silicone (Opt) Accuracy ±1.5% F.S. Operating Temperature PVC - 140°F / CPVC - 180°F / PP - 175°F PVDF - 225°F Pressure Range Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / bar / MPa / Other Scales (Non-Shock)

Details

New USB Intrinsic Safety Barrier for Stand-Alone Applications

The SK-PC-Z1D1-UU1-10-HS USB intrinsic safety barrier enables a host device (i.e., an industrial PC) that is in a Zone 2 environment to be connected to an EXTA2/EXTA3 keyboard or similar USB device in a Zone 1/21 environment.

The barrier enables operation of input devices, such as PC keyboards and trackballs, within Zone 1/21 and 2/22 hazardous areas. To transmit USB signals from and into hazardous areas, it converts the two USB channels into intrinsically safe circuits.

The device is IP20 rated. It must be protected accordingly from adverse conditions, such as water spray or dirt, that exceed the conditions of pollution degree 2.

As an associated apparatus, the SK-PC-Z1D1-UU1-10-HS barrier is certified to lead intrinsically safe circuits into Zone 1/21 hazardous areas. It is a one-to-one data connector. Data is passed through without buffering. The SK-PC-Z1D1-UU1-10-HS barrier does not provide galvanic insulation.

Details

NCS NET Concentrator System® Process Control and Distributed I/O System

Designed specifically for demanding industrial applications, the NET Concentrator System® (NCS) provides a real-time signal gateway between the field or factory floor and your control strategy.

Details

NC-30 Series Non-Contact Liquid Level / Flow Switch

The NC30 Non-Contact liquid Level / Flow Sensor has been designed using high frequency technology to sense the presence of liquid / conductive / non conductive Suitable for Non-Metalic Tubing / Tanks / Drums / Pipe

Non-Contact
Senses through wall
Relay Output
Conductive and Non-Conductive Liquids

Featues:

All Plastic PP Design
Non-Intrusive Liquid Level / Flow Detection through Plastic or Fiberglass Walls
Small Footprint / Easy to Install
LED Display
M12 Disconnect or Fixed Cable Connector
Fits on ½"- 2" Diameter Pipe / Sch 40 / 80
Senses up to 0.3" / (8mm) Wall Thickness

Specifications:

Supply voltage 6 -30VDC Supply current Output type / Pulse Max. 0.6 / 7mA (OFF / ON State) Output type / S - Relay Max. 0.6mA (OFF State) Switched current (Min / Max) Output type / Pulse 100mA Conductive liquids 0.3" (8mm) Non-conductive liquids 0.11" / (3 mm) Ambient temperature range -20 / +80°C Temperature tube/vessel surface -20 / +90°C Housing material Plastic (PP) Protection class NEMA 4X / IP67 Cable Connection PVC Weight (including 2 m cable) Approx. 60 g

Details

NC-15 / NC-25 SERIES Non-Intrusive Flow / Level Switch

All Plastic Design
Excellent Chemical Resistant
No Pressure Drop

Featues:

Senses Liquid through Tubing
Tubing Size ¼" to ½"
Flow / No Flow
Non-Intrusive
Air Bubble Detection
All Plastic Design
Simple to Install
Heavy Walled Tubing / Up to 0.062"
Lightweight
Very Accurate / Sensitivity Adjustment
Perfect for Dosing or Metering Pumps

Specifications:

Applicable Pipes Size 3/8 - ½" / (7 to 13 mm) Materials PolyCarbonat Wall thickness 0.62" Sensing Object Liquid Sensing methods Electrostatic Capacitive / Photoelectric Repeat Accuracy ±0.2 mm max. Power Supply 12 to 24VDC /10% max. ripple / (10.8 to 30VDC) Current Consumption 12mA max. Relay Output Load current /NPN / PNP (100mA max) Residual voltage 1V max. (Load current: 100mA Indicators Detection indicator (orange) Ambient Temperature Range Operating: 0 to 55°C (with no icing or condensation), Storage: -10 to 65°C (with no icing or condensation) Ambient Humidity Range Operating/Storage: 25% to 85% (with no condensation)

Ambient Humidity Range Operating/Storage: 25% to 85% (with no condensation) Temperature Influence ±4 mm of detection level at 23°C in the temperature Range of 0 to 55°C (with pure water or 20% saline solution) Voltage Influence ±0.5 mm of detection level at the rated voltage in rated voltage ±10% range Insulation Resistance 50 M Ohm min. (at 500VDC) between current-carrying parts and case Dielectric Strength 500VAC, 50/60 Hz for 1 min between current-carrying parts and case Vibration Resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock Resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of Protection IP66 (IEC) Connection Method Pre-wired Models (Standard cable length: 2 m) Weight (packed state) Approx. 70 g

Details

N series Batch Controller

The batch controllers of the N-Series are much more advanced compared to our F-Series and D-Series batch controllers. The N-Series distinguishes itself from other batch controllers by its very easy to use numerical keypad. Selecting and entering multiple preset values with the easy to press keys is astonishingly simple. The display is designed for batch processes: at a glance, the operator is aware of the indicated switch points and the actual state of the process. For your convenience the preset and the actual value with their engineering units are displayed simultaneously.

Details

N Series 413 Batch Controller

Fluidwell launches the new N413 Batch Controller with receipt printing functionality. This is very useful for situations where you need a locally printed ticket as evidence of the delivered quantity like tank and truck (un) loading applications. End-of-batch tickets and reprints can easily be printed automatically or on demand. Even in the unexpected event of an uncompleted batch, it is possible to print a ticket. The N413 is a versatile and powerful batch controller, with a printer output, 2 field replaceable, heavy duty relays and three configurable transistor outputs. Relay 1 is fixed as main batch control output. Relay 2 and the transistor outputs can be configured as pump control with time delays, 2-stage batch control, alarm or pulse outputs. This makes the N413 a powerful and versatile batch or delivery controller. The combination of the user-friendly numerical keypad with the compact, clear display, make the N-Series very attractive to our customers. The crystal clear LCD display, provides multiple batch control data simultaneously at a glance, including a graphical indication of the vessel, the batch process and the relay status. The bright backlight is standard available, ensuring perfect readings in all lighting conditions.

Details

MV800 Ultra Compact Electromagnetic Flowmeter Converter

MV800 Ultra compact electromagnetic flow meter converter suitable for connection to full-bore ISOMAG® sensors up to 16

Features:

Ultra compact converter suitable for connection to ISOMAG ® MS1000 or MS2500 sensors up to 16 inches
Suitable for flow measurement of liquids with a minimum conductivity of 20 µS/cm
Measuring accuracy +/- 0.5% of reading
Cast aluminum or 304 SS housing
Nema 6 (IP 67) protection rating
Power supply 10 - 30 VDC @1W, electrical connections via 5-pin connector
Up to two digital pulse outputs and/or 4-20mA outputs available
PC programming via USB cable and dedicated software (MCP Protocol)
No moving parts
Bi-directional flow measurement
Every sensor is factory wet calibrated and tested

Details

MV110 Converter with backlight graphic display for electromagnetic flowmeters

The MV110 converter is mainly designed for application in water and HVAC markets or in other industrial markets where basic measurement requirements or output protocols are needed. Accuracy: ± 0,8% of the read value (on request ± 0,4% of the read value). Repeatability: ± 0,2% Programming through key pad on front plate or via PC connected through mini USB cable adapter Flexible mounting so that display can be seen from the top or form the front Galvanic separation: all inputs and outputs are separated one each other and with the power supply. Housing material: Nylon reinforced with 15% of fiber glass, or Aluminum Protection rate: IP 67 (on request IP68) Available functions: low flow rate cut-off, bidirectional measurement, peak cut-off, empty pipe detection, alarm limit etc. Available accessories: rechargeable backup battery (assures the measurement in case of power loss), 4 GB data logger, built-in Verificator (BIV) for electric characteristic of the sensor. It can be used in combination with any flanged or wafer Isomag® flow sensor.

Details