Specifications:
Power Supply 24VDC Output SPST(Std) or PNP/NPN (Opt) Medium Density > 0.6g/cm3 Operation Point Vertically inserted approx 1" (25mm) Oscillation Starting Time About 3mm Response Time About 1 seconds Output DC 30V /3A Hysteresis settings About 3mm Relay Delay Time 1~505 Power Consumption < 1W Process Connection ¾" NPT/G Thread Electrical Connector M20x 1.5 (Electriccoated cable: 6-8mm) Material to Contact Liquid 316 SS Coated PTFE Teflon® Electrical Connection Gland M16 x 1.5 (standard)
The TFZ Programmable FOUNDATION Fieldbus
Temperature Transmitter saves wire and installation
costs by allowing up to 32 field devices to be
networked onto one, low cost FOUNDATION
fieldbus H1 segment. 
The ALH Series of peristatlic pumps provide high levels of volumetric accuracy for sampling and metering applications. ALH Series pumps are available in 15 different sizes that provide flow rates up to 38,000 GPH. The low maintenance, seal-less design eliminates leaks, contamination and wear problems associated with difficult to seal products.
Self priming high capacity pump can be run dry without damage. Flow rates from 0.02 to 387 GPM (1 to 23,220 GPH). Pressures to 217 psi. 
THERMOWELLS
NOSHOK THERMOWELLS are recommended whenever the process being measured may be under pressure, is corrosive, abrasive or may be at a high velocity. They are also recommended as protection to the operator. The correct thermowell will reduce the possibility of damage to the temperature instrument and allows an instrument to be removed and replaced without shutting down and possibly draining the process. Standard thermowells are supplied with 1/2" NPSM instrument connection. The female thread will accept the 1/2" NPT male thread without galling or seizing. 
Thin clients represent a powerful computing technology enabling users to access virtualized applications and information that runs on centralized servers. They don’t feature HDDs or fans so they are extremely economical. 
