Conoflow's Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.
-
Conoflow's Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions. -
Truflo GI Series Gauge Isolators allow inexpensive pressure gauges, or any other pressure instrument to be used in corrosive services. The upper chamber (gauge side)is filled with a stable fluid such as glycerin or silicone. A Teflon® diaphragm separates it from the lower chamber which receives the media under pressure. Customers can easily fill isolators and install their own gauges.
Features:
- Easy to Mount Gauges
- No Special Equipment is Required
- Perfect Mate for Truflo OBS Plastic Gauges
- Provision for Fill Port
- Housing has a Threaded Vacuum Port for Extracting any Trapped Air during the filling process
- High Chemical Resistance
- Choice of Body Materials for a Wide Range of Applications
- PTFE bonded FPM dished diaphragm for High Chemical Resistance and Sensitivity
- Heavy Duty Design for Safety
- Small Footprint
- Heavy Wall Connection Ports
Specifications:
INLET PROCESS CONNECTION : ½" (M) / (F) NPT / BSP / G / Flange INSTRUMENT CONNECTION : ¼" NPT / G DIAPHRAGM : PTFE Teflon®
-
Glass fiber reinforced polyester (GRP) enclosure, Ex e and Ex tb certified, 110 mm x 110 mm x 65 mm, Customizable configuration of cable gland types as per specification, Installation in Zone 1, Zone 2, Zone 21 and Zone 22 -
Conoflow’s Electro-pneumatic Transducers accept a variety of electrical input signals and convert them to proportional output signals of 3-15, 3-27 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa).The GT_8 Series Transducers incorporate low impedance circuitry and a range selector jumper switch which can be positioned to accept 4-20 or 10-50 mA DC current inputs. The selector feature permits stocking only one unit that can be used in various locations throughout the plant. For easy field adjustment these units are equipped with an external zero setting and a built-in potentiometer on the circuit board for span adjustment.Optional input signal of 0-20 mA is available on the GT_8 Series.Specifications:
- Input Range: 4-20 mA DC | 10-50 mA DC
- Nominal Input Impedance: 145 ohms | 60 ohms
- Linearity: ± 1%
- Temperature Effect: 0.2%FS/10°F (-12°C) change for a 2°F/minute rate of change (2)
- Ambient Temperature Range: 0° to +150°F (-18° to +66°C)
- Approx. Shipping Weight: 7 lbs. (0.77 Kg)
-
Conoflow's GT_8 Series Transducers are explosionproof approved by Factory Mutual (FM), Canadian Standards Association (CSA) and CENELEC. These units incorporate the same high-quality standards as our other I/P Transducer lines and are backed by Conoflow's years of experience as a leading manufacturer of instrumentation.These units accept a variety of electrical input signals and convert them to proportional output signals of 3-15, 3-27 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa). Other output signals are also available. Consult the factory for details.Specifications:
- Input Range: 4-20 mA DC | 10-50 mA DC
- Nominal Input Impedance: 145 ohms | 60 ohms
- Linearity: ± 1%
- Temperature Effect: 0.2%FS/10°F (-12°C) for a 30°F (-1°C) change in 15 minutes
- Ambient Temperature Range: 0° to +140°F (-18° to +60°C)
- Approx. Shipping Weight: 13 lbs. (5.9 Kg)
-
Conoflow’s Electropneumatic Transducers accept a variety of electrical input signals and convert them to proportional pneumatic output signals. The miniature transducer is available with two different circuit boards. One board accepts current inputs of 4-20/10-50 mA DC and the other accepts inputs of 0-5/ 1-9 VDC. Each board utilizes a range selector jumper switch which can be positioned to accept a 4-20 or 10-50 mA DC input or a 0-5 or 1-9 VDC input, respectively.
Specifications:
- Supply Pressure Effect: 0.08 PSIG decrease for every 10 PSIG increase in supply pressure
- Air Consumption: 0.1 SCFM (0.003 m3/min)
- Air Delivery Rate (Max.): 4 SCFM (0.1113 m3/min)
- Exhaust Rate (Max.): 1.5 SCFM (0.042 m3/min)
- Linearity: ± 0.75% of Span
- Temperature Range Ambient: 0° to +130°F (-17° to +55°C)
- Approx. Shipping Weight: 1.7 lbs. (0.77 Kg)
-
Description The HCS HART Concentrator System converts a HART digital signal to a serial (RS-485 or RS-232) MODBUS RTU communication protocol. This allows HART transmitters and valves to interface directly with MODBUS-based monitoring and control systems. -
Heated pressure hoses serve to heat media, maintain a constant temperature and transport media such as the following without heat loss: oil, grease, wax, resin, tar, paint, water, glue, plastic, casting compound, food, etc. The heated hose is mounted on movable system and machine parts in most cases. Temperature ranges: up to 250 °C standard.
Advantages:
- Operating temperature: 5 °C to 250 °C as standard
- Nominal widths: 4 mm to 25 mm as standard
- Voltages: 12 V to 400 V
- Operating pressures: up to 500 bar
- Heat output optimised for application
- Heating cables produced in-house
- Available for the automotive industry as silicone free / LABS-free version
-
Heated pressure hoses serve to heat media, maintain a constant temperature and transport media such as the following without heat loss: oil, grease, wax, resin, tar, paint, water, glue, plastic, casting compound, food, etc. The heated hose is mounted on movable system and machine parts in most cases. Temperature ranges: up to 250 °C standard.
Advantages:
- Operating temperature: 5 °C to 250 °C as standard
- Nominal widths: 4 mm to 25 mm as standard
- Voltages: 12 V to 400 V
- Operating pressures: up to 500 bar
- Heat output optimised for application
- Heating cables produced in-house
- Available for the automotive industry as silicone free / LABS-free version
-
HES HART to Ethernet Gateway System converts signals from wired HART devices to Ethernet MODBUS/TCP and HART-IP
Timely knowledge about your process enables better decisions and faster preventive action. Now you can get the process detail that you need from your Smart HART devices to MODBUS/TCP and HART-IP based monitoring and control systems at the speed of Ethernet with the HES HART to Ethernet Gateway System. Connect up to 64 Smart HART devices to the HES and collect the Dynamic Variables and the Device Variables, along with diagnostic bits and bytes, from each device that helps deliver critical information needed to help you address process and device problems before they turn into unplanned downtime. Moore Industries’ rugged HES supports HART 5, 6 and 7 devices with sufficient memory to handle thousands of process variables, and diagnostic data points from up to 64 connected smart HART devices. The HES allows you to further leverage your industrial Ethernet investment by making all of this valuable HART data viewable with any web browser or MODBUS/TCP compliant host. Support for these open industrial protocols enables you to easily interface with any process control or asset management system while taking advantage of any Industrial Internet of Things (IIoT) initiatives that facilitate the propagation of process data to higher level corporate or analytical systems. -
The HIM HART Loop Interface and Monitor unlocks the full potential of new and in-place smart HART multivariable transmitters and valves. Converts HART to 4-20mA Signals The HIM allows up to three additional analog process variable measurements from a smart device with no additional process penetrations or wiring.
Download Data Sheet