The TFZ Programmable FOUNDATION Fieldbus
Temperature Transmitter saves wire and installation
costs by allowing up to 32 field devices to be
networked onto one, low cost FOUNDATION
fieldbus H1 segment. -
The TFZ Programmable FOUNDATION Fieldbus
Temperature Transmitter saves wire and installation
costs by allowing up to 32 field devices to be
networked onto one, low cost FOUNDATION
fieldbus H1 segment. -
The 532 Auto/Manual Station ensures the integrity of your processes with maximum reliability. Isolated inputs and outputs guard against electrical interference, the front face meets NEMA 4X standards for watertight operation, and solid metal housing and sturdy rubber keys enhance durability. The 532 has been engineered to be the industry’s most user friendly and comprehensive Auto/Manual Station. It has three digital display areas, with two offering up to 9 characters of true alphanumerics. The bright, crisp vacuum fluorescent display offers better readability than any other display technology. Additional operator friendly features include: custom programmable alarm messages, keys that illuminate when in use and an easy-to-use menu system. -
The TRUNKGUARD TPS400 Power Supply enables fast and easy implementation of fi eldbus systems by providing properly conditioned power for simplex and duplex FOUNDATION fi eldbus H1 networks. TRUNKGUARD TPS400 is FOUNDATION fi eldbus registered and fully compliant with FF831-1 (the technical specifi cation for fi eldbus power supplies). -
Substantially reduce the cost of transmitting process signals with Moore Industries’ unique problem solver, the CCS® Cable Concentrator System®. The industryfirst CCS provides money-saving solutions for both monitoring and control applications. Data Acquisition—The CCS collects any combination of up to 496 analog and/or digital signals from dispersed devices (transmitters, transducers, contact closures, etc.). It digitizes and concentrates the signals on to an RS-485 communication link, and sends the data miles between locations. Control—With the CCS, you can transmit control signals long distances on a single data link to valves, pumps, motors, and other devices that require precise on/off or proportional control. -
Moore Industries’ family of pressure-to-current transmitters provide an economical solution when a pneumatic device must interface with a data acquisiton/control system, controller, recorder, or other electronic instrument. These compact, yet powerful units accept a pneumatic signal (3-15 psig, 0.2-1 bar, 3-27 psig, etc.) and accurately convert it to a proportional 4-20mA (or 10-50mA) output. Control Room and Field Mounting—Our complete line of P/I transmitters includes models perfect for both control room and field mounting. Moore Industries’ P/I transmitters are available with a wide variety of housings, and with special features and options. For detailed information, see Table 1 and the Ordering Specifications table. -
I-Box accommodates a wide range of instruments and electrical components. Ideal for indoor installations, a high-impact, light weight and chemical resistant structure protects instruments and electrical components even under demanding conditions. -
MX Pipe-Insert Immersion Heater is designed to provide uniformly distributed heat to storage vessels containing high viscosity liquids such as asphalt, molasses, tar, paint, glue, wax and oils without causing charring or coking. Units are installed in a suitable metal pipe contained inside the storage vessel (minimum 2" (51 mm) diameter), then heat is transferred safely from the heating element of the MX heater to the inner wall of the pipe by a combination of convection and radiation. This heater is a safe, cost-effective and virtually maintenance-free solution that eliminates the need for high maintenance pumps or open flames, which may present a fire hazard, especially when the liquid being heated is flammable. -
4001V ANACONDA INDUSTRIAL HOSE PUMPS. Exceptional self-priming capabilities make the 4001V Series an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers.
Self priming pump can be run dry without damage. Flow rates from 1 to 330 GPH. Pressures to 100 psi. -
The F197 is a manual set-point generator. The operator enters an analog or a scaled output value or a percentage which will be transmitted as a (0)4 – 20mA or 0 – 10V DC signal to a control device. If available, the F197 can also display the measured actual process value. However, there is no direct control relationship between the input and output value. Further, one low and one high alarm value can be set with an alarm ignore function to monitor the process.
The display shows the pre-set value, actual value and status simultaneously. On-screen engineering units are easily configured from a comprehensive selection. -
112P NEMA 4X, 7, 9 & 13 Flanged Pressure Switch/Diaphragm Sensor
Flanged pressure switch for installations that formerly required a chemical seal with fill fluids. Reliable Nega-Rate® Belleville disc spring sensing mechanism. Redundant seals with venting between seals for alarm or indication. 316 stainless steel body and hermetically sealed, explosion-proof electrical assembly well suited for hazardous or corrosive atmospheres.
Specifications
• Electrical: Snap action electrical switch assembly listed by Underwriters’ Laboratories, Inc., FM Approval and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18” long leads
• Pressure Connection:
o 1 inch, 1/16 raised face flange per ANSI
o B 16.5 - 1998
o Class 150 (150#)
o Class 300 (300#)
Note: Customer responsible for gasket selection and installation. (Refer to Installation and Operating Instructions supplied with switch)
• Temperature Range*:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +250°F (-40°C to +121°C)
• Adjustment: Internal, slotted adjustment with range scale
• Shipping Weight: Approximately 4.5 pounds
*Limited by gasket material selected -
181P NEMA 4X and 13 Vacuum Switch/Internal Adjustment
Compact, adjustable vacuum switch well suited to numerous applications. Our efficient Nega-Rate® Belleville disc spring offers superior set point stability and vibration resistance. The 181P series vacuum switch also has a selectable deadband feature which can be pre-set at the factory.
Specifications
• Electrical Listings: Switch listed by Underwriters Laboratories, Inc., CSA International and FM Approval
• Electrical Connection: 1/2 NPT male conduit connection, 18" free leads
• Pressure Connection: 1/4 NPT Female and 1/2 NPT Male
• Temperature Range*
o Ambient: -40°F to +176°F (-40°C to +80°C)
o Media: -40°F to +300°F (-40°C to +149°C)
• Adjustment: Internal, slotted adjustment wheel
• Shipping Weight: Approximately 13 ounces
* Temperature limits change with O-Ring selection -
From simple signal conditioning, to sensor-level I/O, to complex distributed intelligence, the versatile I/O EQUATION STATION ® is your solution. Even though it’s the same size as a typical process instrument, this multifunction I/O module configures to handle both routine, and one-of-a-kind, applications: