Shop

NC-30 Series Non-Contact Liquid Level / Flow Switch
The NC30 Non-Contact liquid Level / Flow Sensor has been designed using high frequency technology to sense the presence of liquid / conductive / non conductive Suitable for Non-Metalic Tubing / Tanks / Drums / Pipe

Non-Contact

Senses through wall

Relay Output

Conductive and Non-Conductive Liquids

Featues:

All Plastic PP Design

Non-Intrusive Liquid Level / Flow Detection through Plastic or Fiberglass Walls

Small Footprint / Easy to Install

LED Display

M12 Disconnect or Fixed Cable Connector

Fits on ½"- 2" Diameter Pipe / Sch 40 / 80

Senses up to 0.3" / (8mm) Wall Thickness

Specifications:

Supply voltage 6 -30VDC Supply current Output type / Pulse Max. 0.6 / 7mA (OFF / ON State) Output type / S - Relay Max. 0.6mA (OFF State) Switched current (Min / Max) Output type / Pulse 100mA Conductive liquids 0.3" (8mm) Non-conductive liquids 0.11" / (3 mm) Ambient temperature range -20 / +80°C Temperature tube/vessel surface -20 / +90°C Housing material Plastic (PP) Protection class NEMA 4X / IP67 Cable Connection PVC Weight (including 2 m cable) Approx. 60 g
Details
OBS-2VU Series Double Sided All Plastic Gauge + Isolator
One Piece / Double-Sided Design No Filling or Assembly Required Adjustable Range Markers

Features:

Industry's First All Plastic Double Sided Gauge

Heavy Duty Rugged Design

Completely Corrosion Resistant

Designed to Act as Visual Pressure Alert

Extra Large Color Display

Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations

Highest Accuracy in Industry / ±1.5%

Factory Filled / Glycerin or Silicone (Opt)

Dual Scale / psi/kPA / psi/bar (Opt)

One-Piece Molded Design

Suitable for Corrosive Media + Slurries

Specifications:

Power Supply 24VDC Output SPST(Std) or PNP/NPN (Opt) Medium Density > 0.6g/cm3 Operation Point Vertically inserted approx 1" (25mm) Oscillation Starting Time About 3mm Response Time About 1 seconds Output DC 30V /3A Hysteresis settings About 3mm Relay Delay Time 1~505 Power Consumption < 1W Process Connection ¾" NPT/G Thread Electrical Connector M20x 1.5 (Electriccoated cable: 6-8mm) Material to Contact Liquid 316 SS Coated PTFE Teflon® Electrical Connection Gland M16 x 1.5 (standard)
Details
OBS Series Pressure Gauge and Isolator
All Plastic Design No Filling Required Excellent Chemical Resistance Pressure Range Markers

Features:

All Plastic / Gauge & Isolator / Filled

Heavy Duty Design / Simple to Install

Completely Corrosion Resistant

Designed to Act as Visual Pressure Alert for Bag / Filter Change-Out

Extra Large Color Display

Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations

Highest Accuracy in Industry / ±1.5%

No Filling Required

Glycerin Fill or Silicone (Opt)

One-Piece Molded Design (No Assembly)

Suitable for Corrosive Media + Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection / ½" Housing PVC / CPVC / PP / PVDF / PTFE Teflon® Diaphragm / One Piece Molded Design Lens High Impact Polycarbonate Dial Red & Black Scale White Background, dial arc 270° Measuring Principle Bourdon Tube Diaphragm / Teflon® Movement SS316 / Brass / (Non Wetted) Gauge Red / Yellow / Green / Movable Plastic Pressure Pressure Markers Connection ½" (M) / (F) NPT / G Type / Flange Filling Glycerin or Silicone (Opt) Accuracy ±1.5% F.S. Operating Temperature PVC - 140°F / CPVC - 180°F / PP - 175°F PVDF - 225°F Pressure Range Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / bar / MPa / Other Scales (Non-Shock)
Details
BAG “BIG ASS” Series Pressure Gauge and Isolator
Excellent Corrosion Resistance No Assembly Required No Filling Required

Features:

All Plastic (Gauge & Isolator) / Filled

Heavy Duty Design / Simple to Install

Completely Corrosion Resistant

Designed to Act as Visual Pressure Alert

Extra Large Color Display

Reduces Pressure Surges / Metering Pump Pulsations

Highest Accuracy in Industry / ±1.5%

Glycerin Filled or Silicone (Opt)

One-Piece Molded Design

Suitable for Corrosive Media + Slurries

Specifications:

Dial Diameter Large 3" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection / ½" Housing Polypropylene / PTFE Teflon® Diaphragm / One Piece Molded Design / No Assembly or Filling Required Lens High Impact Polycarbonate Dial Red & Black Scale White Background, dial arc 270° Measuring Principle Bourdon Tube Teflon® Diaphragm Movement SS316 / Brass (Non Wetted) Gauge Optional / Red / Yellow / Green / Movable Plastic Markers - Pressure Range Pointers Fitted on the Bezel Connection ½" (F) / (M) NPT / G Type / Flange Filling Glycerin or Silicone (Opt) Accuracy ±1.5% Operating temperature PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / bar / MPa / Other Scales Available - Consult Factory *(Non-Shock)
Details
OBS-A Series All Plastic Center Mount Gauge + Isolator
Corrosion Resistant No Filling Required High Accuracy

Features:

All Plastic Gauge & Isolator / Filled

Heavy Duty Design / Simple to Install

Completely Corrosion Resistant

Range Markers Act as Visual Pressure Alert

Extra Large Color Display

Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations

Highest Accuracy in Industry / ±1.5%

Glycerin or Silicone (Opt)

No Filling Required

One-Piece Molded Design / No Assembly

Suitable for Corrosive Media / Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Panel Mount Housing PP / Teflon® Diaphragm - One Piece Molded Design / (No Assembly / Filling Required) Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 Diaphragm / PTFE Teflon® Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Pressure Range Pointers Fitted on the Bezel Connection ½" (M) / (F) NPT / G Type / Flange Filling Glycerin / Silicone (Optional) Accuracy ±1.5% F.S. Operating temperature PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available / (Non-Shock
Details
OBS-R 360 Rotating Gauge and Isolator
Head Rotates 360 Degrees No Filling Required Excellent Chemical Resistance

Features:

360 Degree Full Rotation

Filled Heavy Duty Design / Simple to Install

Completely Corrosion Resistant

Designed to Act as Visual Pressure Alert ex. Bag/Filter Change-Out

Extra Large Color Display

Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations

High Accuracy / ±1.5%

Factory Pre-Filled

One-Piece Molded Design / No Assembly

Suitable for Corrosive Media + Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection / ½" Housing PP / PTFE Teflon® Diaphragm / One Piece Molded Design (No Assembly or Filling Required) Lens High Impact Polycarbonate Dial Red & Black Scale White Background, dial arc 270° Measuring Principle Bourdon Tube / SS316 Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Pressure Range Pointers Fitted on the Bezel Connection ½" (M) / (F) NPT / G Type / Flange Filling Glycerin (Std) or Silicone (Opt) Accuracy ±1.5% F.S. Operating Temperature PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Pressure Range* Standard range 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available bar / MPa * (Non-Shock)
Details
PGS SERIES – Plastic Gauge / Mini Pulsation Dampener
Mini Pulse / Surge Suppressor Perfect for Metering Pumps Economical

Features:

All Plastic Gauge & Isolator

Heavy Duty Design / Simple to Install

Completely Corrosion Resistant

Bladder Diaphragm Design

Red Markers Designed to Indicate Optimum Operating Range

Extra Large Color Display

Reduces Pressure Surges caused by Water Hammer / Metering Pump Pulsations

High Accuracy / ±1.5%

Factory Filled / Glycerin

Excellent Chemical Resistance

One-Piece Molded Design / No Assembly

Suitable for Corrosive Media + Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection FNPT / ½" Housing One Piece Molded Design Polypropylene / No Assembly or Filling Required Lens Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube Diaphragm / FPM (Standard) Movement SS316 / Brass / (Non Wetted) Gauge Two (2) Red Adjustable Plastic Markers Pressure Range Pointers fitted on the Bezel Connection ½" FNPT Filling Glycerin Accuracy ±1.5% F.S. Operating temperature Max. 160°F / 80°C Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi Other units available / bar / MPa / Other Scales Available (Non-Shock)
Details
OBS-GO Series All Plastic Gauge Only-1/4″ SST NPT
No Filling Required Suitable for Corrosive Environments High Impact Casing

Features:

Heavy Duty Design

Suitable for Corrosive Environments

Dual Scale / Red / Black

Suitable for Pulsing Applications

3 Range Tabs / Red / Yellow / Green

Extra Large Color Display

High Accuracy / ±0.75 %

Factory Pre-Filled Glycerin

High Impact Casing

Visual Pressure Ranges

Simple to Install

Perfect Mate for GI Series Isolators

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection MNPT / ¼" Housing Polypropylene Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 / Brass Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection ¼" (M) NPT / G Type / 316 SST Filling Glycerin (Std) / Silicone (Opt) Accuracy ±0.75% Operating temperature Max. Working Temp / PP - 180°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) (Pressures up to 1500 psi) Other units available / bar / MPa
Details
OBS-DGO Series Plastic Double Sided Gauge1/4″ SST NPT
Double-Sided No Filling Required Visual Pressure Range Markers Corrosion Resistant

Features:

Heavy Duty / Double Sided

Suitable for Corrosive Environments

Dual Scales Heavy

Duty Design

3 Range Tabs / Red / Yellow / Green

Large 2½" Color Display

High Accuracy / ±0.75 %

Factory Pre-Filled

Glycerin (Std) / Silicone (Opt)

Visual Pressure Ranges

Simple to Install

Perfect Mate for Plastic Isolators

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection Housing Polypropylene Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 / Brass Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection ¼" (M) NPT / G Type / 316 SST Filling Glycerin / Silicone (Opt) Accuracy ±0.75% Operating temperature Max. Working Temp / PP - 180°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi (Second Scale: kPA) Other units available bar / MPa - Pressures up to 1500 psi available
Details
OBS-TT SERIES – Plastic ‘Tell-Tale’ Gauge
Upset Pressure Notification Registers Pressure Spikes Suitable for Corrosive Environments

Features:

Heavy Duty Enclosure

Notification of Pressure Spikes

Suitable for Corrosive Environments

Records Pressure Surges

Heavy Duty Design

3 Range Tabs / Red / Yellow / Green

Extra Large Color Display

High Accuracy / ±0.75 %

Resettable

High Impact Casing

Dual Scale

Simple to Install

316 SS ¼" NPT Connection

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection / (M) NPT / ¼" Housing Polypropylene Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 / Brass Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection ¼" (M) NPT / G Type / 316 SST Filling No Fill Accuracy ±0.75% F.S. Operating temperature Max. Working Temp / PP - 180°F Pressure Range* Standard Ranges / 0-60 / 0-100 / 0-160 psi / kPA Other units available / bar / MPa / Other Scales Available - Consult Factory
Details
OBS-V SERIES – Plastic Compound / Vacuum Gauge
No Filling Required Suitable for Corrosive Environments Heavy Duty Design

Features:

Fit & Forget

Suitable for Corrosive Environments

Large 2½" Red / Black Face

Dual Scale

Heavy Duty Design

3 Range Tabs / Red / Yellow / Green

Extra Large Color Display

High Accuracy / ±0.75 %

Factory Pre-Filled

Glycerin (Std) / Silicone (Opt)

High Impact Case Housing

Visual Pressure Ranges

Specifications:

Dial Diameter Large 2½" Face / Big Numbers / Clear Markers Mounting Direct Mount / Bottom Connection Housing Polypropylene Lens High Impact Polycarbonate Dial Red & Black Scale White Background / dial arc 270° Measuring Principle Bourdon Tube / SS316 / Brass Movement SS316 / Brass Gauge Red / Yellow / Green / Movable Plastic Markers Pressure Range Pointers Fitted on the Bezel Connection ¼" (M) NPT / G Type / 316 SST Filling Glycerin (Std) / Silicone (Opt) Accuracy ±0.75% Operating temperature Max. Working Temp / PP - 180°F Pressure Range* Standard Ranges / 0-30 + 30 psi (Second Scale: kPA) Other scale available - Consult Factory
Details
OBS-LE SERIES – Digital LED Pressure Gauge / Transmitter / Switch
Completely Corrosion Resistant Accuracy ±1% 4-20mA + 2 Relay Outputs psi / bar / MPa / Kg/cm2

Features:

All Plastic / Gauge & Isolator

Heavy Duty Design / Simple to Install

Completely Corrosion Resistant

Green LED changes to Red in Upset Condition

Extra Large LED Display

Reduces Pressure Surges

Simple Push Button Programming

High Accuracy / ±1.0%

Visual Notification of Relay Outputs

No Filling Required

One-Piece Molded Design / No Assembly

Suitable for Corrosive Media + Slurries

Specifications:

Dial Diameter Large 2½" Face / Big Numbers Mounting Direct Mount / MNPT / FNPT / ½" Housing PVC / PP / PVDF / PTFE Diaphragm One Piece Molded Design (No Assembly) Lens Polycarbonate Dial LED - Green (Normal) / Red (Relays Active) Connection ½" (M) / (F) NPT / G Type / Flange Accuracy ±1.0% Operating temperature PVC 140°F / CPVC 180°F / PP 170°F / PVDF 195°F Pressure Range* 0-150 psi / 10 bar / (Ambient Temp) *(N0n-Shock) Output 4-20mA + 2 (NPN or PNP) Relay Outputs Power Supply 10-30VDC SPECIFICATIONS
Details
Delta-P Series Digital Pressure Differential Gauge + Relay
Perfect for Basket Strainer / Bag Filter Notification Excellent Chemical Resistance Relay Output

Features:

All Plastic Design / Glass Filled Ryton

Corrosion Resistant

NEMA 4X Rugged Enclosure

Liquid Crystal Display

Pressure Range / 0-225 psi

Easy to Program Relay Set-Point

psi or bar Pressure Scale

Small Footprint / 2" Diameter

Easy to Install

Eprom Memory / Retains Set-Point / Criteria

Low Power Detection Feature

Actual Pressure Difference Displayed on Screen

Manual Override Function

Programmable Time Intervals / Relay Activation

Specifications:

Dry Relay Contact 0.5 AMP at 24VDC (N/O) Output Body Diameter 2" Operating Temperature -20 - 60°C / 4-140°F Supply Power 24VDC Accuracy ±0.5% Maximum Inlet Pressure 225 psi / 5 bar Enclosure NEMA 4X / Ryton PPS
Details
OBS-LC SERIES – Pressure Gauge & Isolator / Battery Operated
One Piece Plastic Design Battery Operated > 3 Years Digital Combo Gauge + Isolator

Features:

All Plastic Gauge & Isolator

No Filling Required

Heavy Duty Design / Simple to Install

Completely Corrosion Resistant

Extra Large LCD Display

Reduces Small Pressure Surges caused by

Water Hammer / Metering Pump Pulsations

Highest Accuracy in Industry / ±1%

One-Piece Molded Design / No Assembly

Suitable for Corrosive Media + Slurries

No Programing Required

PTFE Diaphragm / Standard

Replaceable Lithium Battery

Long Life > 3 Years

Specifications:

Dial Diameter Large 2½" Face / Big Numbers Mounting Bottom Connection / ½" Housing PP / PVDF / (PTFE Teflon®) Diaphragm Lens One Piece Molded Design / No Assembly Display Liquid Crystal Display - LCD Programming Push-Button / Eprom Non-Volatile Accuracy ±1.0% F.S. Operating Temperature PVC - 140°F / CPVC - 180°F / PP - 170°F PVDF - 195°F Connection ½" (M) / (F) NPT / G Type / Flange Pressure Range* 150 psi / 10 bar) * (Non-Shock)
Details
GI Series All Plastic Gauge Isolator
Truflo GI Series Gauge Isolators allow inexpensive pressure gauges, or any other pressure instrument to be used in corrosive services. The upper chamber (gauge side)is filled with a stable fluid such as glycerin or silicone. A Teflon® diaphragm separates it from the lower chamber which receives the media under pressure. Customers can easily fill isolators and install their own gauges.

Features:

Easy to Mount Gauges

No Special Equipment is Required

Perfect Mate for Truflo OBS Plastic Gauges

Provision for Fill Port

Housing has a Threaded Vacuum Port for Extracting any Trapped Air during the filling process

High Chemical Resistance

Choice of Body Materials for a Wide Range of Applications

PTFE bonded FPM dished diaphragm for High Chemical Resistance and Sensitivity

Heavy Duty Design for Safety

Small Footprint

Heavy Wall Connection Ports

Specifications:

INLET PROCESS CONNECTION : ½" (M) / (F) NPT / BSP / G / Flange INSTRUMENT CONNECTION : ¼" NPT / G DIAPHRAGM : PTFE Teflon®
Details
MODEL JS-10 / JS-30 Magnetic Point Level Switch
The JS-10 (1 amp) and JS-30 (3 amp) switches are magnetically actuated point level switches for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps these switches isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly.
Features:

No process piping or valves required

Retrofit onto existing MLG installations

Internal bias magnet maintains state in high-vibration environments

Available in SPDT (one internal switch) or DPDT (two internal switches)

Available with flying leads (no enclosure), Epoxy-coated Aluminum enclosure, or 316 Stainless Steel Enclosure

Class I, Division 1, Groups B, C, D

Class I, Division 2, Groups ABCD

Class II and Class III, Groups EFG

ATEX and IEC ratings (pending)

Maintenance-free
Details
MODEL JP-450 Pneumatic Level Switch
The JP-450 is a magnetically actuated “no bleed” pneumatic point level switch for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps the switch isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly. Two JP-450’s can be coupled with a JPLR latching relay to give plug-and-play dump/fill valve control.
Features:

No process piping or valves required (except customer pneumatic lines)

Retrofit onto existing MLG installations

“Snap-action” design maintains state in high-vibration environments

Accepts filtered air or gas supply

Field configurable (High/Low level)

316 Stainless Steel enclosure
Details
Field Mount Flow Rate Indicator / Totalizer (F110)
The F110 flow transmitter is the most popular model in our range of flow rate indicators / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration.

The display shows flow rate, total and accumulated total. On-screen engineering units are easily configured from a comprehensive selection.

Advantages

Robust IP66, IP67 (NEMA Type4X) field enclosure. It is so rugged, you can even stand on it!

Intrinsically Safe available - ATEX and IECEx approval for gas and dust applications

Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!

Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors

Features

Analog and pulse outputs

Displays total and flow rate simultaneously

Large digit selection for flow rate or total

Flow rate: seven 17mm (0.67") or 8mm (0.31") digits

Total - resettable: seven 17mm (0.67") digits

Accumulated total - not resettable: eleven 8mm (0.31") digits

Separate engineering units for flow rate and total on the display

Remote control input to reset total or to lock the "clear total" button

LED backlight

Auto backup of settings and running totals in EEPROM memory

Ambient temperature: -40°C to +80°C (-40°F to 176°F)

Various accessories are available for this product

The F-Series is so rugged, even a truck can stand on it!

Applications

The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).

Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required. Alternative basic model: F070. Alternative basic models: F010, F011, F012, F014. Alternative advanced models: F112, F113, F118 or the D-Series basic DIN panel mount indicators.
Details
2001HK Series Peristaltic Pump With K4 Series Digital AC Variable Frequency Drive
Exceptional self-priming capabilities make the 2001HK Series an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers. A wide range of flow outputs can be obtained by simply changing the tubing size. One size pumphead accepts six standard tubing sizes. The sealed, spring-loaded pumphead rollers provide extended tubing life and automatically compensate for minor variations in pump tube wall thickness. The 2001HK Series pump system also allows you to mount the controller on the wall, away from the harsh environment. All 2001 Series pumps feature a unique sealed peristaltic pumphead, with optional leak detection, which protects against corrosive and dangerous chemical spills. Features:

Flows to 51.4 GPH, Pressures to 100 psi.*

Rugged industrial drive uses NEMA TEFC motors

Seal-less pumping technology

Self-priming – suction lifts to 30 ft.

No check valves – few moving parts

Compact or Remote wall-mount K4 Series Digital AC Variable Frequency Drive with LED digital display & integral keypad

Dry run capability

User selectable manual or automatic control

Various long life chemical resistant tubing options available

Automatic control available via 0-10VDC or 4-20mA
Details
140K Diaphragm Seals

140K Diaphragm Seals for Threaded Off-Line Process Connections All welded - Gasketless Design Process Connection Sizes 1/4inch NPTF or 1/2 inch NPTF Maximum Working Pressure 2000 PSIG (13.80Mpa) @ 100F (38C) Standard 5000 Psig (34.50Mpa) @ 100ºF (38ºC Optional)

Download Datasheet

Details
FR95 Airpak® Filter-Regulator

Conoflow's FR95 Series Airpak®, Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers and other pneumatic control devices. This units design provides high flow capability, durable materials of construction and bubble tight shut-off.

Details
GFH45 Airpak® Filter-Regulator

Conoflow's GFH45 Series Airpak® Filter-Regulators are widely used to provide clean, regulated air pressure to instruments and controls, automatic machinery and other pneumatic devices.

Details
GFX02/GFX04 Series Filters

Conoflow's GFX Series Filters are used to provide clean air to instruments and other pneumatic devices. The 35 micron filter removes foreign particles from the air allowing intermediate and final control devices to operate at peak efficiency. Available in brass or aluminum construction, the GFX Series Filters cover most of today’s instrument and industrial applications. Each filter has a maximum supply pressure rating of 300 PSI (2068 kPa). These units have two 1/4" NPT connections with an arrow on the cap denoting air flow direction. An optional center port is available. Designed for reliable, almost maintenance-free service.

Details
GH04 Series Cushion Loading Regulator

The model GH04 Cushion Loading Regulator is a compact unit designed for industrial and commercial services requiring a constant, regulated air pressure. Primarily used as a cushion loading device for Conoflow Piston Actuators, this unit's design and high exhaust capabilities lend itself to many other application requirements. Constructed of all aluminum, this lightweight unit offers versatility in line mounting and gauge mounting with dual input and output 1/4" NPT connections. It is available with a 0-60 PSI (0-414 kPa) regulated pressure range and Buna "N" elastomers. The controlling ball valve is Viton.

Details