Shop

  •

    IPH2 / IPX2 Field-Mount Current-to-Pressure Transmitter , Explosion-proof

      moore_logo_200_85 These 2-wire (loop-powered) I/P transmitters accept a current signal (such as 4-20mA) from a DCS, PLC or PC-based control system. They convert the current signal to a pneumatic signal (3-15psig, 0.2-1bar, 20-100kPa, etc.) to provide precise, proportional control of valves, actuators and other pneumaticallycontrolled devices. The economical IPH2 (Type 4X) is watertight, dust-protected, and resistant to corrosion and chemicals. In addition to meeting Type 3X/4X requirements, the IPX2 can be installed in explosionproof environments. Both units are available with an optional coalescing fi lter/regulator that combines an air fi lter and miniature supply line regulator with a pressure gauge that reads in both psig and bars.
    Details

  • IPT2 DIN-Style Current-to-Pressure Transmitter

    moore_logo_200_85 The high-performance IPT 2 Current-to-Pressure (I/P) Transmitter converts a current signal to a pneumatic signal so that an electronic-based system such as a DCS, PLC, or PC can control a pneumatic actuator, valve, or damper drive. Available models accept a wide range of current inputs (4-20mA, 4-12mA, and 12-20mA) and provide a proportional pneumatic signal (3-15psig, 0.2-1 Bar, 20-100kPA, etc.).
    Details

  • IPX2 / IPH2 Field-Mount Explosion-Proof Current-to-Pressure Transmitter (2-Wire)

      moore_logo_200_85 These 2-wire (loop-powered) I/P transmitters accept a current signal (such as 4-20mA) from a DCS, PLC or PC-based control system. They convert the current signal to a pneumatic signal (3-15psig, 0.2-1bar, 20-100kPa, etc.) to provide precise, proportional control of valves, actuators and other pneumaticallycontrolled devices. The economical IPH2 (Type 4X) is watertight, dust-protected, and resistant to corrosion and chemicals. In addition to meeting Type 3X/4X requirements, the IPX2 can be installed in explosionproof environments. Both units are available with an optional coalescing fi lter/regulator that combines an air fi lter and miniature supply line regulator with a pressure gauge that reads in both psig and bars.   Download Data Sheet
    Details

  • Isolated Barriers

    pepperl_fuches_200_85 H-System connects to the control system via a system connector and cable, reducing planning and start-up time. Pre-wired boards and snap-on interface modules make maintenance simple. Combined with minimized space requirements and low power dissipation in the cabinets, the H-System is a cost-effective solution.
    Details

  • ITC 650 SERIES – UNVERSAL MULTICHANNEL INDICATOR – 8 Inputs

     

    ITC 650 SERIES – UNVERSAL MULTICHANNEL INDICATOR - 8  Inputs

    The Levelpro ITC 650 Universal Data Logger can display current and record values from 8 different measuring channels. Each channel can be individually designated (described) with any engineering measuring unit. The LCD graphical display allows for visualization of the values from all 8 channels simultaneously. A significant advantage is possibility of viewing the trends in each measuring channel.

    Applications:

    • Temperature
    • Flow
    • Pressure
    • PH
    • Level
    • Redox
    • Humidity
    • Current

    Features:

    • Universal Multi-Channel Indicator
    • LCD Graphic Display Up to 8 inputs Universal / (4-20mA)
    • 2 Electronic Relay Outputs
    • 24VDC Power Supply Output: 24VDC / 200mA Will Power All 8 Channels
    • RS-485 / Modbus RTU Standard
    • Temperature / Flow / Humidity / Pressure / PH / Redox / Level / Current
    • Viewing the Trends in each of the 8 Measuring Channels
    • Any Text Description Possible: Name and Units
    • Data transfer to the Master System via RS-485
    • Password Protected 

    Specification:

    • Power Supply:  120VAC -24VDC
    • Inputs:    2 /4 /8 Inputs / 4 - 20mA
    • Relay Outputs:   2 electronic relays / NO type (ER1, ER2 with max. load 24VAC / 35VDC / 200mA
    • Communications:  RS485, Modbus RTU
    • Operating Temperature:  -10°C to +70°C
    Details

  • ITC 7200 SERIES – UNVERSAL CONTROLLER- 48 Inputs

     

    ITC 7200 SERIES – UNVERSAL CONTROLLER- 48  Inputs

    The ITC series advanced controllers and recorders have been designed for to handle and control advanced industrial applications.

    Applications:

    • Temperature
    • Flow
    • Pressure
    • PH
    • Level
    • Redox
    • Humidity
    • Current

    Features:

    Trending Diagrams
    Universal Data Logger / Controller / Display ITC 7200 Series 1.5 GB for data! The ITC series data loggers can record channels at a speed of 10 samples per second. It has 1.5 GB built-in flash memory intended for data registration. .
     
    DAQ Manager
    To manage large amounts of data we have designed a software package that is free of charge. The software converts the data into easy viewing graphs and tables, and can provide group measurement results, create reports and export data into other files. Its fully functional free version can be downloaded from our website or ordered as a payable CD-ROM version.
     
    Color LCD Touchscreen
    The color touchscreen allows for easier and more efficient use of the device The display reacts accurately to even the slightest touch. The ITC also allows for the use of a traditional keyboard and a USB mouse
     
    Use Java applets
    It is possible to create your own website or use one of the templates included in ITC series. Applications such as tank level via with bar graphs, flow meters indicating flow speed or total liquid flow, a pressure gauge indicating process pressure...all are possible with the ITC series This solution makes monitoring of the entire system much more transparent and simple to use.
     
    Measure / Recalculate / Control and Display
    Calculate the data according to your own requirements; one result can be used as an argument of another action. An example, current measurement from 8 channels and voltage from 8 channels cross checked against the total power from 8 items being measured. All data can be visualized in a range of ways: as numerical values, quasi-analog indicators, phasor charts, horizontal or vertical charts, horizontal or vertical bars.
    Manage a Developed Network of Devices
    For more demanding customers with many needs we have prepared the Advanced Communication Module (ACM). This module includes interfaces such as: Ethernet, USB Host, RS-485 and RS-485 shared with RS-232. All the Modbus interfaces can work in both master and slave mode. Through the utilization of an Ethernet link the user can monitor operation of the entire system via the Internet from anywhere in world, via an INTERNET browser. In addition the data can be monitored via the RS-485 interface along with PC software.

     

    Specification:

    • Power Supply:  19 to 50VDC , 16 to 35VAC , 85 to 260VAC/DC
    • Inputs:    Universal, Thermocouples: J,K,S,T,N,R,B,E(PNEN), L(GOST), RTD 2-3 wire, Pt100, Pt500,Pt1000, (PN_EN),GOST Ni100, Ni500, Ni1000(PN-En), Cu50,Cu100 (Pn-83M-53852), Universal pulse 5kHz
    • Outputs:   4-20madc, SPST Rely 1A/250V
    • Communications:  RS485, Modbus RTU
    • Operating Temperature:  0°C to 50°C
    Details

  • ITC 8000 SERIES – UNIVERSAL CONTROLLER -72 Inputs

     

    ITC 8000 SERIES - UNIVERSAL CONTROLLER - 72 Inputs

    The ITC series advanced controllers and recorders have been designed for to handle and control advanced industrial applications.

    Applications:

    • Temperature
    • Flow
    • Pressure
    • PH
    • Level
    • Redox
    • Humidity
    • Current

    Features:

    Trending Diagrams
    Universal Data Logger / Controller / Display ITC 8000 Series 1.5 GB for data! The ITC series data loggers can record channels at a speed of 10 samples per second. It has 1.5 GB built-in flash memory intended for data registration. .
     
    DAQ Manager
    To manage large amounts of data we have designed a software package that is free of charge. The software converts the data into easy viewing graphs and tables, and can provide group measurement results, create reports and export data into other files. Its fully functional free version can be downloaded from our website or ordered as a payable CD-ROM version.
     
    Color LCD Touchscreen
    The color touchscreen allows for easier and more efficient use of the device The display reacts accurately to even the slightest touch. The ITC also allows for the use of a traditional keyboard and a USB mouse
     
    Use Java applets
    It is possible to create your own website or use one of the templates included in ITC series. Applications such as tank level via with bar graphs, flow meters indicating flow speed or total liquid flow, a pressure gauge indicating process pressure...all are possible with the ITC series This solution makes monitoring of the entire system much more transparent and simple to use.
     
    Measure / Recalculate / Control and Display
    Calculate the data according to your own requirements; one result can be used as an argument of another action. An example, current measurement from 8 channels and voltage from 8 channels cross checked against the total power from 8 items being measured. All data can be visualized in a range of ways: as numerical values, quasi-analog indicators, phasor charts, horizontal or vertical charts, horizontal or vertical bars.
    Manage a Developed Network of Devices
    For more demanding customers with many needs we have prepared the Advanced Communication Module (ACM). This module includes interfaces such as: Ethernet, USB Host, RS-485 and RS-485 shared with RS-232. All the Modbus interfaces can work in both master and slave mode. Through the utilization of an Ethernet link the user can monitor operation of the entire system via the Internet from anywhere in world, via an INTERNET browser. In addition the data can be monitored via the RS-485 interface along with PC software.

     

    Specification:

    • Power Supply:  19 to 50VDC , 16 to 35VAC , 85 to 260VAC/DC
    • Inputs:    Universal, Thermocouples: J,K,S,T,N,R,B,E(PNEN), L(GOST), RTD 2-3 wire, Pt100, Pt500,Pt1000, (PN_EN),GOST Ni100, Ni500, Ni1000(PN-En), Cu50,Cu100 (Pn-83M-53852), Universal pulse 5kHz
    • Outputs:   4-20madc, SPST Rely 1A/250V
    • Communications:  RS485, Modbus RTU
    • Operating Temperature:  0°C to 50°C
    Details

  • iTracker

    eastech_logo_200_85 By combining low-cost wireless sensing with high-speed automated analytics, iTracking® Systems provide Cities, Utilities and Consulting Engineering firms with all the necessary tools for: Inflow & Infiltration Micro Detection Early-Warning Overflow and Backup Prevention Dynamic Condition Assessment Fact-Based Model Validation
    Details

  • K-System Intrinsically Safe Isolation Barriers

    pepperl_fuches_200_85 K-System isolated barriers offer an extensive range of intrinsic safety interface modules for many signals and applications – from simple isolators to highly functional modules. Furthermore, the signal conditioners are the perfect choice for general-purpose. Both types of modules can be mounted on the same Power Rail. They are clearly differentiated by color as signal conditioners have grey front labels. K-System modules are available in a variety of housing widths so they easily fit into any cabinet or enclosure. Whether one chooses the 12.5 mm KC-modules or the 20mm and 40mm KF-modules, the electrical and mechanical characteristics of the K-System are maintained.
    Details

  • Kepware’s KEPServerEX

     

    Kepware's KEPServerEX

    Connects disparate devices and applications, from plant control systems to enterprise information systems

    KEPServerEX is the industry’s leading connectivity platform that provides a single source of industrial automation data to all of your applications. The platform design allows users to connect, manage, monitor, and control diverse automation devices and software applications through one intuitive user interface. KEPServerEX leverages OPC (the automation industry’s standard for interoperability) and IT-centric communication protocols (such as SNMP, ODBC, and web services) to provide users with a single source for industrial data. The platform is developed and tested to meet our customers’ performance, reliability, and ease-of-use requirements.

    Business Value:

    KEPServerEX provides the industrial connectivity, usability, and performance required by the enterprise—offering competitive benefits that can be experience from the plant floor to IT to the boardroom.

    Features:

    • Accessibility ... KEPServerEX provides access to client applications (like MES and SCADA) and IoT and Big Data analytics software via OPC, proprietary protocols (including GE NIO, SuiteLink/FastDDE, and Splunk), IT protocols (including MQTT, REST, ODBC, and SNMP), and flow measurement export to common Oil & Gas industry and customized formats.
      • OPC
      • Automation Interface
      • IT Interface
      • Cloud Interface
      • Exporters
    • Optimization ... KEPServerEX optimizes communications and reduces network and device load via data conditioning and reduction, customized load balancing, and protocol-specific communications optimization.
      • Data Conditioning and Reduction
      • Redundancy
      • Load Balancing
      • Communications
      • Machine-to-Machine Linking
      • Programmatic Changes
    • Aggregation ... KEPServerEX simplifies the configuration of connected applications by providing a single point of entry to all information—eliminating the need to purchase, operate, troubleshoot, and maintain multiple disparate solutions for discrete connectivity.
      • Centralized Platform
      • Unified Configuration
      • Data Storage and Retention
    • Connectivity ... KEPServerEX supports the broadest range of drivers available, including current and legacy devices across various verticals, a variety of wired and wireless network mediums, and connectivity to databases, custom software applications, and other OPC servers.
      • Driver-Based Access
      • Telemetry Environments
      • Rapid Deployment
      • Simulation
    • Security ... KEPServerEX includes a variety of tools that control user access to the server, data source, or data values, regulate read/write access, provide the ability to disconnect client applications, and support the configuration of secure data tunnels.
      • Configuration
      • Runtime
    • Diagnostics ... KEPServerEX isolates device and application communications for troubleshooting, offering OPC diagnostics for real-time and historical views of OPC events and communications diagnostics to capture the protocol frames transferred between the server and any device.
      • OPC Diagnostics
      • Communications Diagnostics
      • Third-Party Diagnostics Integration
    Details

  • LH Connection Head for Head-Mount Instruments

    moore_logo_200_85 Perfect for Head-Mount Instruments The LH connection heads are ideal for use with head-mount transmitters such as Moore Industries’ TRX/TRY PC-Programmable and THZ2 Smart HART® Temperature Transmitters. The LH heads also protect terminal blocks used for sensor wire terminations.
    Details

  • Limit value switches

    pepperl_fuches_200_85 Limit value switches signal whether the medium being monitored has reached, risen above, or fallen below, a set level (VDI/VDE Directive 3519) based on its installation height. Examples: Overflow / dry-run protection Minimum-maximum control Overspill protection
    Details

  • LM7000 Ultrasonic Level Meter

      flomotion_logo_200_85

    Perfect for tank level measurement and control

    The FLOMOTION LM7000 provides non-contacting level measurement for a wide variety of applications in both liquids and solids. The system is composed of an ultrasonic sensor and a remote mounted controller for maximum flexibility. Easy calibration and maintenance-free performance means you can install the LM7000 rapidly and with confidence.   Features:
    • Measurement range 33 ft (S330 sensor) or 50 ft (S500 sensor)
    • Programmable 4-20mA analog output
    • Menu driven programming
    • 4-20mA and relay outputs
    • 3 or 6 SPDT relays for alarms and external control
    • Sensor is weather resistant and safe against submersion (NEMA 6P)
    • Automatic temperature compensation
    • Datalogging
    • Single or Dual Sensor
    Details

  • LP 200 SERIES Plastic Pressure Sensor / Transmitter

     

    LP 200 SERIES Plastic Pressure Sensor / Transmitter

    The Levelpro LP200 was designed to measure Pressure or Level within industry's most demanding corrosive process applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a threaded process pipe tee fitting. For level measurement applications the LP200 can simply be mounted into the side of the tank utilizing a NPT / G type bulkhead or weld-o-let fitting. The LP200 implements a state of the art ceramic measuring principle that changes the physical pressure which equates to no more than a few microns into a linear electronic signal that can be measured. This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm resulting in high resistance to alternating loads and long-term durability...exactly what is required for tough industrial applications.

    Typical Applications:

    • Chemicals / Acids / Bases
    • Tank Level
    • Industrial Process Piping
    • Vapor Pressure
    • Leak Detection Equipment
    • Environmental Protection
    • Scrubbers Filter / Strainer Notification
    • Leachate Collection
    • Weir Flow
    • Scrubbers

    Features:

    • PP / PVDF / 316 SST Body
    • Pressure Range / 0 - 225 psi
    • Output / 4-20mA / 2 Wire Loop Powered
    • NPT / G / Union Type Connection
    • Ceramic Sensing Diaphragm
    • Plug & Play Design
    • High Accuracy
    • No Programming Required
    • Temperature Compensated
    • Excellent Chemical Resistance

    Specifications:

    • Range 0 - 225 psi / (Other Ranges Available)
    • Medium Gas & Liquid
    • Accuracy 0.2% or 0.5% F.S
    • Working pressure 18 - 36V DC
    • Output signal 4-20mA / two-wire
    • Medium temp -30°C - 85°C
    • Environment temp -30°C - 80°C
    • Store temp -30°C - 80°C
    • Temp. effect ±0.02% FS
    • Pressure connection ¾" NPT / G Type / ½" Union Type
    • Connection DIN Hirschminn Connector
    Details

  • LS Series PP Body Plastic Paddle Wheel Flow Transmitter

     

    LS Series PP Body Plastic Paddle Wheel Flow Transmitter

    ZIRCONIUM CERAMIC SHAFT / BEARINGS ALL PLASTIC CONSTRUCTION RETROFITS into SIGNET® TYPE FITTINGS

    Features:

    • Industry’s Highest Accuracy-0.75%
    • Excellent Chemical Resistance, PP/PVDF, PFA, Ceramic
    • Sensor Body Material PVDF / PP
    • Rotor Material PFA (Teflon)
    • Shaft and Bearings  Zirconium Ceramic (Zr02)
    • O-ring Material FKM (Viton) / EPDM optional
    • Size Range ½” - 24” • Measuring Flow Range (0.33 Ft/Sec To 26 Ft/Sec)
    • Excellent For Low Or High Temperatures -20 To 90°C (-4 To 194°F)
    • NEMA 4X (IP65) Or NEMA 6 (IP68) Rating
    • Extra Long Lasting PFA Paddle Assembly   (Zirconium Ceramic Shaft & Bearings-Standard)
    • Double FPM O-Ring Seal
    • High Pressure Rating (Up To 200 Psi)
    • Frequency Output -18.5Hz /Ft/Sec
    • NPN Pulse Output
    • Supply Voltage 5 to 24Vdc
    • Electrical Connection  DI Mini-Connector 43650-A (IP65) , Electrical Cable (IP68)
    • Cable Type  3 conductor + shield 26AWG (PVC)
    • Reverse Voltage Protection  Standard
    • Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
    • Measuring Viscosity Range 0.5 to 20 cts
    • Maximum Particle Size  <0.5mm2 (Max particle size)
    • Maximum Operating Pressure 200psig at -30C
    • Maximum Temperature 36 psi at 90C
    CLAMP SADDLES & TEES LSS + LS Insertion Fittings Truflo offers to the flow market the most complete range in clamp saddles, up to 16”  

    Technical Information:

    • Truflo Clamp Saddles can be used with PE, PP, PVDF PVC Pipe
    • The Use of teflon tape is advised.

    Materials:

    • PPGF. - Polypro Glass Filled
    • FPM O-ring
    • 316 SSt
    • Reinforced Outlet 316 SSt
    Details

  • LSS Series PP Body Plastic Paddle Wheel Flowmeter

     

    LSS Series PP Body Plastic Paddle Wheel Flow Meter

    Features:

    • Up to 24" Pipe Size
      • Zirconium Ceramic Rotor / Bearings
      • Accuracy ±0.75% of Full Scale
      • Retrofits Into Signet® Type Fittings
    • Large Display Changes from Green to Red when in Alarm State
    • Accuracy ± 0.75% Of Full Scale
    • Pipe Size (1/2 -24 Inch)
    • Heavy Duty Industrial Design
    • Sensor Body Material Natural PVDF / PP
    • Rotor Material PFA Teflon
    • Shaft and Bearing Material Zirconium  Ceramic (Zr02)
    • Display Housing Material Polymide 66 +PBT + 15% Glass Filled (UL94V-0)
    • Flow Rate + Totalizer (Resettable)
    • Memory Mode Non-Volatile EPROM
    • Flow Velocity Range (0.33 to 26 Ft/S) (0.1 To 8 M/S)
    • Measuring Viscosity Range 0.5 to 20 cts
    • Maximum Particle Size  <0.5mm2 (Max particle size)
    • Maximum Operating Pressure 200psig at -30C
    • Maximum Temperature 36 psi at 90C
    • Eprom Memory-Totalizer Value Will Not Be Lost
    • Nema 4X (IP66) Protection • Bright LED Display Flow Units-- Litre, USGPM, M3, Ton
    • 4-20mA + Two (7) Amp Relays Output (Standard)
    • Output Frequency 60.5Hz m/s nominal ( 18.45HZ ft/s nominal)
    • Pulse Output Transistor NPN Open-collector (Max. DC 60V/100ma)
    • Supply Voltage 14 to 28Vdc
    • Communication  RS-485 Modbus RTU Mode
    • Protection Class IP65/ NEMA 4X
    • Corrosion Resistant All Plastic Wetted Parts-PVDF/PP Body Zirconium Ceramic Shaft-PFA Teflon Paddle
    • Simple Installation
    Details

  • LT260 Loop Powered Level Transmitter

      flomotion_logo_200_85 The LT260 Series is designed to measure liquid level in a wide variety of applications. The compact, loop-powered LT260 provides continuous, non-contacting level measurement. With a measuring range of 26ft (8m) the LT260 will accommodate a wide range of applications. The large LCD display, 4 status lights and 5 button keypad make setup and operation quick and easy. Features:
    • Low Cost
    • High Accuracy
    • Non-Contact Measurement
    • No Moving Parts
    • Compact, Lightweight Design
    • Corrosion Resistant Materials
    • Built-in Temperature Compensation
    • Programmable 4-20mA Output
    • Selectable Transducer Power Level
    • Adjustable Damping
    • Displays Level, Distance or Space
    • Loss of Echo Indicator
    • Interface this level sensor with the FLOMOTION DR5000 Chart Recorder
    Applications:
    • Bulk Chemical Storage
    • Pump Stations
    • Clarifiers
    • Filtration Levels
    • River Level Monitoring
    • Trash Rack Level Monitoring
    • Waste Sump
    • Tanker Truck Filling
    • Water Storage Towers
    • Reactors
    Details

  • LT330 Series Ultrasonic Level Transmitter

      flomotion_logo_200_85 The LT330 Series is designed to measure liquid level in a wide variety of applications. The compact, loop-powered LT330 provides continuous, non-contacting level measurement. Up to 33ft (10m) range. The large LCD display, 4 status lights and 5 button keypad make setup and operation quick and easy. Features:
    • 33ft (10m) range
    • Accuracy of 0.2% with 1mm resolution
    • Easy to install 2” NPT fitting
    • Loop powered 4-20mA (max 750 Ω)
    • 5 digit numeric LCD display
    • Integral 5 button keypad
    • 4 status lights
    • Built-in temperature compensation sensor
    Applications:
    • Bulk Chemical Storage
    • Pump Stations
    • Clarifiers
    • Filtration Levels
    • River Level Monitoring
    • Trash Rack Level Monitoring
    • Waste Sump
    • Tanker Truck Filling
    • Water Storage Towers
    • Reactors
    Details

  • MLD-35 Series Teflon® Capacitance Level Sensor

     

    MLD-35 Series Teflon® Capacitance Level Sensor

    MLD-35 Series Continuous Level Sensors are intended for level measurement of liquid and bulk solids in tanks, vessels sumps or silos, hoppers, etc. They are comprised of a housing with electronic module and a electrode that converts a capacitance signal to a current signal of 4-20mA or voltage signal (0-10V) output. The MLD series incorporates a Teflon® encapsulated measuring electrode making it suitable for corrosive chemicals and sticky polymers. 

    Features:

    • Continuous Level Measurement of Liquids or Bulk Solids up to 10 feet
    • 4-20mA Loop Powered
    • Supply Voltage 12-34 VDC
    • Output Current  4-20mA (2-wire) / 0-10 VDC (3-wire)
    • Teflon® Coated Electrode
    • Excellent Chemical Resistance
    • Visual indication of Function and Status of Level via two LED Lights located on housing
    • Wide Selection of Electrical Connections
    • Heavy Duty Design
    • IP67 / IP68
    • Temperature -40°C to 200°C
    Details

  • MLR-70 Series Guided Wave Radar Level Transmitter

     

    Teflon® Coated Guided Wave Radar

    Continuous Liquid Level Meter

    The MLR radar level meters are compact level measurement device that include a transmitter that emits microwave pulses along a rod or wire rope electrode. The pulse propagates along the electrode in the form of electromagnetic wave toward the level surface, where it is reflected and the signal wave component is returned to the receiving module of the electronic housing. The on-board circuitry measures the time of flight of electromagnetic wave and the distance to the surface level is calculated. According to the level height, the level meter output is set and the measured value is shown on the display. Radar level meters are resistant against changes in the atmosphere (pressure, temperature, dust, steam) and to changes in medium parameters (change in dielectric constant and conductivity).

    Features:

    • Suited for Continuous Level Measurement of various Liquid / Bulk Solids / Viscous Materials
    • View Measured Values on the Display
    • Universal Use / Direct Mounting onto Hoppers / Silos / Tanks / Sumps
    • Teflon® Coated Stainless Steel Rod or Rope
    • Electrode Measuring Range up to 40m
    • Explosion Proof / ATEX (Optional)
    • Temperature -40C to 200C
    • Pressure  Steel Rod (30°C/4MPa , 85°C/2MPa , 130°C/2MPa, 160°C/1,5MPa200°C/0.3 MPa) Rope (30°C/1MPa, 85°C/0.5MPa,130°C/0.1MPa)
    • Current Output (4-20mA) / HART® Protocol
    • Supply voltage 18 to 36VDC
    • IP67
    Details

  • MNCS microNCS MODBUS RTU Master and Distributed I/O System

    moore_logo_200_85 The microNCS provides a real-time signal gateway between the field or factory floor and your control strategy. Part of Moore Industries’ NCS NET Concentrator System® family of intelligent distributed I/O, the stand-alone microNCS accepts four or eight fully-isolated analog inputs and four discrete (contact closure) inputs. It “concentrates” this data onto one or multiple communication links, and transmits it long distances back to one or more host DCS, PLC or PC-based control systems.
    Details

  • MODEL JP-450 Pneumatic Level Switch

    joglor_logo_200_85 The JP-450 is a magnetically actuated “no bleed” pneumatic point level switch for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps the switch isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly. Two JP-450’s can be coupled with a JPLR latching relay to give plug-and-play dump/fill valve control.  

    Features:

    • No process piping or valves required (except customer pneumatic lines)
    • Retrofit onto existing MLG installations
    • “Snap-action” design maintains state in high-vibration environments
    • Accepts filtered air or gas supply
    • Field configurable (High/Low level)
    • 316 Stainless Steel enclosure
    Details

  • MODEL JS-10 / JS-30 Magnetic Point Level Switch

    joglor_logo_200_85 The JS-10 (1 amp) and JS-30 (3 amp) switches are magnetically actuated point level switches for use with magnetic liquid level indicators. Magnetic coupling through the chamber wall keeps these switches isolated from process fluid and pressure, allowing setpoints to be adjusted on the fly.  

    Features:

    • No process piping or valves required
    • Retrofit onto existing MLG installations
    • Internal bias magnet maintains state in high-vibration environments
    • Available in SPDT (one internal switch) or DPDT (two internal switches)
    • Available with flying leads (no enclosure), Epoxy-coated Aluminum enclosure, or 316 Stainless Steel Enclosure
    • Class I, Division 1, Groups B, C, D
    • Class I, Division 2, Groups ABCD
    • Class II and Class III, Groups EFG
    • ATEX and IEC ratings (pending)
    • Maintenance-free
    Details

  • Multi-Channel Signal Isolators and Converters (2-and 4-Wire)

    moore_logo_200_85 Featuring a very narrow installation footprint, miniMOORE™ Signal Isolators, Converters, Boosters and Splitters combine multiple analog signal channels in a rugged, easy-to-install signal conditioner. Reliable and very economical, the miniMOORE multi-channel family includes the model MIX 2-wire (loop) and the model MIT 4-wire (line/mains) powered models. The complete family delivers cost-effective solutions for an expansive range of signal interface applications.
    Details
Copyright 2019 CB Automation Inc | All Rights Reserved
LinkedIn
Go to Top