SewerWatch the First Mobile App for Wastewater Infrastructure -
SewerWatch the First Mobile App for Wastewater Infrastructure -
Series 200P NEMA 4 & 13 Pressure Switch/Internal Adjustment
Versatile Nega-Rate® Belleville disc spring pressure switch for a wide range of applications. Series 200P (piston sensor) for hydraulic applications up to 10000 psig system pressure.
Specifications
• Electrical: Snap action electrical switch recognized by Underwriters’ Laboratories, Inc. and CSA International
• Electrical Connection: 1/2 NPT female conduit connection with terminal block
• Pressure Connection: Wetted Material 1 1/4 NPT Female
• Temperature Range*:
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +300°F (-40°C to +149°C)
*Temperature limits change with O-Ring selection
• Adjustment: Concealed wrench flat adjustment with range scale
• Shipping Weight: Approximately 3 pounds -
Series 117P Sanitary Pressure Switch
This field adjustable, compact pressure switch is intended for low- to mid-range process applications. The Tri-Clamp® compatible, polished, process connection makes this switch ideal for food, beverage and other sanitary services. Set point stability and vibration resistance are a function of the Nega-Rate® Belleville disc spring. This unit features 316 stainless steel construction, an explosion-proof/hermetically sealed electrical assembly, 18" standard free leads and SPDT or DPDT electrical forms and a wetted material surface polish of 9 - 11 micro inch Ra (0.23 - 0.28 micron Ra).†
Specifications
• Electrical: Snap action electrical switch listed by Underwriters’ Laboratories, Inc., FM Approval and CSA International
• Electrical Connection: 1/2 NPT male conduit connection with PVC insulated 18 AWG, 18" long leads
• Pressure Connection: 1 1/2" sanitary fitting mates with Tri-Clamp® fitting†
• Temperature Range
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +250°F (-40°C to +121°C)
• Adjustment: Internal, slotted adjustment with range scale
• Shipping Weight: Approximately 2 pounds -
Series 100P (diaphragm sensor) for pneumatic and low impulse hydraulics up to 3000 psig system pressure
Versatile Nega-Rate® Belleville disc spring pressure switch for a wide range of applications.
Specifications
• Electrical: Snap action electrical switch recognized by Underwriters’ Laboratories, Inc. and CSA International
• Electrical Connection: 1/2 NPT female conduit connection with terminal block
• Pressure Connection:
o Wetted Material 1 1/4 NPT Female
o Wetted Material 4, 5, 7 and 9 1/2 NPT Female
• Temperature Range
o Ambient: -40°F to +180°F (-40°C to +82°C)
o Media: -40°F to +300°F (-40°C to +149°C)
• Media temperature limits change with O-Ring selection
• Adjustment: Concealed wrench flat adjustment with range scale
• Shipping Weight: Approximately 3 pounds
-
SENTINEL SERIES TELEMETRY TANK LEVEL MONITORING
The Sentinel is a Cellular Tank or Sump Level Monitoring system that delivers reliable daily measurements that are both scheduled and event driven. Remote monitoring with the Sentinel is exceptionally flexible, eliminating the hassles of network infrastructures and Internet service. Instead, the Sentinel connects via a wireless signal to local cellular networks and transmits Alarms, Inventory, Battery Status and GSM Signal Strength, all of which are available through the Sentinel Cloud Based Website. The Sentinel online provides you with important data readily at your fingertips on your Computer, Tablet or Smart phone.Features:
- Battery Operated - No Programming - One Button Only
- Remote Monitoring through Cellular Networks
- Wireless Communication GSM or Digital Wireless Radio
- Frequency Bands GSM 850 / 1900 MHz WLAN
- E-mail Reporting - Alarms, Text E-mail
- 24/7 access to data through Cloud Based Sentinel 247TM Online
- Battery powered up to 5 years (3 calls/day)
- Low Monthly Cost
- Powerful - Long Range Antenna (Perfect For Remote Locations)
- Access Data Via PC, Laptop, Smartphone, Tablet
- Secure Cloud Data (password protected)
- No Hidden Costs
- Standard Batteries
- Can be Mounted Directly to Top of Tank - 2" NPT
- Eliminate Costly Emergency Fills or Pump-Outs
-
Self-regulating heating cables consist of two parallel bus wires embedded in a networked plastic heating element, doped with surrounding carbon particles. If the temperature increases during operation, the plastic expands due to molecular expansion and the distance between the carbon particles increases. Resistance increases and output drops. When it cools down, this process is reversed and output increases.
This physical property provides several benefits, including the ability to overlap the self-regulating cable and installation without the requirement of a temperature cut-out device.
Benefits:
- Self-regulating with adaptable output
- Various temperature range applications
- High chemical resistance
- No temperature regulation or limiting required
- Easy to lay and to install
- Can be cut to length off the roll
-
CX Screwplug Immersion Heater is used primarily to heat water in tanks through natural convection currents. Typical heaters have standard 1" - 2 1/2" NPT tapered plugs. Other sizes or plugs are available on special order. -
The versatile construction of the SB stainless steel enclosure makes it ideal for use with any manufacturer’s hockey-puck units. It protects all Moore Industries’ hockey-puck instruments. -
The UL Approved ECT-DIN 2-Wire Isolator is now available in a narrow 15mm aluminum housing. The thinner ECT-DIN 2-Wire Isolator with 15mm width retains the same General and Hazardous area approvals as the rest of the ECT family of isolators. It also has the same RFI/EMI protection and -40°C to 85°C operating temperature range. The ECT-DIN 2-Wire Isolator can be installed in hazardous locations and does not require installation in climate-controlled environments, making it perfect for more extreme locations.
The rugged narrow 15mm ECT DIN 2-Wire isolator and converter with 4-20mA, 1-5V and 0-10V inputs and 4-20mA output, permits more isolators to fit in cabinets and field enclosures where installation space is limited, saving space and money.” The ECT DIN 15mm narrow size allows more isolators to fit in cabinets and field enclosures where installation space is a premium. This is ideal for utilizing existing field mounted cabinets. The solid metal housing stands up to the continuous, daily rigors of process control and factory automation applications. An optional externally-mounted flange provides a secure mount, which ensures secure installation in high vibration environments. The ECT is UL approved Class I, Division 2, Groups A, B, C & D T4.
The rugged and reliable ECT family of isolators provides versatile choices to match the type of AC or DC power available at each location. ECT-DIN 2-wire Output-Loop powered models, ECT 2-wire Input-Loop powered models, or 4-wire (Line/Mains) Powered Isolators/Converters and Splitters are also available. The complete ECT family delivers reliable signal isolation and conversion solutions for the most demanding ambient and noisy installation conditions.
Download Data Sheet -
Ideal for Plastic Piping Quick Visual Indication Low Cost Simple Installation No Guide Rods
Features:
- Quick & Clear Visual Indication
- True Union Design for Easy Installation / Removal
- Flow Ranges / 0.02 - 880 GPM
- Ideal for Plastic Piping Systems
- Low Pressure Drop
- PVC End Connections
- Optional Limit Switches
- Low Cost
-
The ROUTE-MASTER™ RM100 Series is an intrinsically-safe fieldbus power supply system providing galvanically-isolated and fieldbusconditioned power for FOUNDATION Fieldbus or PROFIBUS PA segments. Fieldbus devices may be connected into these segments only through RMA100 or RMA100C Device Couplers, and any intrinsicallysafe segment may only contain intrinsically-safe devices, that are approved for the appropriate Zone/Division of use and the appropriate Gas hazard. -
The R-BOX accommodates transmitters, meters, indicators, analyzers, integrators, and many other rail-mounted instruments. The variety of available R-BOX sizes means that we have an R-BOX that will fi t your process needs. Choose from standard internal widths of 3, 6, 9, and 12 inches. Designed to meet Type 4X and IP66 ratings, the R-BOX is resistant to ultraviolet rays and chemicals. Its high-impact structure protects instruments even in harsh fi eld conditions.