-
300 SERIES NOSHOK MECHANICAL COMPACT SPDT PRESSURE SWITCHES WITH ADJUSTABLE HYSTERESIS are constructed with a rugged zinc-plated steel housing and process connection, and provide adjustable hysteresis. Utilizing a proven diaphragm or piston type sensing technology, it provides excellent reliability, repeatability, and affordability for use in many applications. The micro switch contacts are silver plated for extended service life and exceptional dependability. Switching functions are field adjustable, while under pressure, and it features an SPDT single changeover contact configuration. These switches are RoHs compliant. -
300/400/600/700/900 SERIES VAPOR ACTUATED REMOTE THERMOMETERS
NOSHOK VAPOR ACTUATED REMOTE THERMOMETERS operate using a temperature actuated liquid in the sensing element and a highly accurate, high quality pressure gauge to indicate media temperature. As the media temperature increases the capillary fill fluid vaporizes, causing an increase of pressure within the Bourdon tube, and activates the movement and pointer for proper indication. Dial scale graduations are non linear, therefore, the highest degree of accuracy and readability is found in the upper half of the scale. -
3000 SERIES 80 CM2 NOMINAL DIAMETER HYDRAULIC LOAD CELLS
NOSHOK 80 CM2 NOMINAL DIAMETER HYDRAULIC LOAD CELLS are constructed from a high grade, corrosion resistant stainless steel and joined with a high quality NOSHOK pressure gauge or transducer to measure axial loads and bearing forces in turning and drilling machines, extruders and other compression force measurement applications. Accuracy levels range from ±0.125% full scale (BFSL) to ±1.5% full scale depending on the measuring instrument with measuring ranges from 360 lbf through 70,000 lbf. -
Our Pepperl+Fuchs Bebco EPS 3000 series, Type Y or Z / Ex pz purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. The system reduces the classification within the protected enclosure from a Zone 2 to non-hazardous area.
- DEMKO, ATEX, UL,cUL & FM classified
- Conforms to NFPA 496 and ISA 12.4 EN 50016, and ATEX standards
- For Type Y, Type Z, and Type pz applications
- Enclosure volumes to 250 cu. ft.(7.08 cu. m)
Type Ex pz purge system models - 3000 series
3003: Class I Enclosure Volumes ≤ 90 ft33004: Class I Enclosure Volumes ≤ 250 ft3 -
The Pepperl+Fuchs Bebco EPS 3000 series, Type Y purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. The system reduces the classification within the protected enclosure from a Division 1 to a Division 2 area.
- UL, cUL & FM classified
- Conforms to NFPA 496 and ISA 12.4 standards
- For Type Y or Type Z applications
- Enclosure volumes to 250 cu. ft.(7.08 cu. m)
Type Y purge system models - 3000 series
3003: Class I Enclosure Volumes ≤ 90 ft3 3004: Class I Enclosure Volumes ≤ 250 ft3 -
The Pepperl+Fuchs 3000 series Type Z purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. Suitable for Class 1, Division 2 to non-hazardous and Zone 2 to non-hazardous.
- DEMKO, ATEX, UL, cUL & FM classified
- Conforms to NFPA 496 and ISA 12.4 EN 50016, and ATEX standards
- For Type Y, Type Z, and Type nP applications
- Enclosure volumes to 250 cu. ft.(7.08 cu. m)
Type Z purge system models - 3000 series
3003: Class I Enclosure Volumes ≤ 90 ft33004: Class I Enclosure Volumes ≤ 250 ft3 -
Download DatasheetStandard Features:
- Standard Pressure Rating with Metal Lower Housing
- Process Connection Sizes 1/4 inch NPT through 1 1/2 inch NPT
- Maximum Working Pressure 1,250 to 2,500 PSIG (8.63 to 17.25 Mpa) @ 100ºF (38ºC)
-
Download DatasheetStandard Features:
- 1 inch (25.40mm) and Larger
- Process Connect Sizes 1, 2 and 3 inches
- ASME/ANSI Flange Ratings up to 2,500lb
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Rating per ASME/ANSI B16.5
- Flange Faces (125-250Ra Spiral Finish is standard)
- Raised Face, Flat Face, Ring Type Joint and Special Flange Faces are available
-
Standard Features:
- 3" (76.20mm) 150# and 3" (76.20mm) 300lb
- Process Connection Sizes 3" ASME/ANSI Flange Ratings 150# and 300# ... other flange ratings available
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Ratings per ASME/ANSI B16.5
- Flange Faces, Raised Face and Flat Face
Download Datasheet
-
Standard Features:
- 1 1/2 inch (25.40mm) through 8 inch
- ASME/ANSI Flange Ratings up to 2,500lb
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Rating per ASME/ANSI B16.5
- Flange Faces (125-250Ra Spiral Finish is standard)
- Raised Face, Flat Face , Ring Type Joint and Special Flange Faces are available
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing 3 inches and larger
- All Pipe Schedules per ASME/ANSI B16.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
Download Datasheet
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing 4 inches and larger
- All Pipe Schedules per ASME/ANSI B16.10 or B36.19
- Maximum Working Pressure Conforms to Pipe Schedule Ratings as calculated by ASME/ANSI B31.1 Equation "4" @ 100 ºF (38ºC)
Download Datasheet
