-
TYPE 10 STANDARD/ 10H ELEVATED PRESSURE BOLTED REPLACEABLE DIAPHRAGM SEALS NOSHOK STANDARD PRESSURE BOLTED REPLACEABLE DIAPHRAGM SEALS are designed to utilize a replaceable diaphragm clamped between the metal housings. They are rated to 2,000 psi with a displacement capability of 3.2 ml. NOSHOK ELEVATED PRESSURE BOLTED REPLACEABLE DIAPHRAGM SEALS are a threaded connection, off-line seal with a replaceable diaphragm. They are designed for high pressure applications and are rated to 5,000 psi. Displacement capability is 1.4 ml.
-
The TRUNKSAFE Fault-Tolerant Fieldbus System provides a cost-effective, yet highly reliable, strategy to maintain continuous communications between field devices and a host system in the event of any single point failure (such as any open single wire) on a FOUNDATION fieldbus™ H1 or PROFIBUS PA segment.
-
The TRUNKGUARD TPS400 Power Supply enables fast and easy implementation of fi eldbus systems by providing properly conditioned power for simplex and duplex FOUNDATION fi eldbus H1 networks. TRUNKGUARD TPS400 is FOUNDATION fi eldbus registered and fully compliant with FF831-1 (the technical specifi cation for fi eldbus power supplies).
-
THERMOWELLS NOSHOK THERMOWELLS are recommended whenever the process being measured may be under pressure, is corrosive, abrasive or may be at a high velocity. They are also recommended as protection to the operator. The correct thermowell will reduce the possibility of damage to the temperature instrument and allows an instrument to be removed and replaced without shutting down and possibly draining the process. Standard thermowells are supplied with 1/2" NPSM instrument connection. The female thread will accept the 1/2" NPT male thread without galling or seizing.
-
The X4 Series is a rugged family of variable speed AC drives, built and designed for harsh industrial environments. They come with IP66/ UL Type 4X and IP55/UL Type 3R enclosures for the ultimate protection from potential hazards such as moisture, dust or extreme temperatures. Each drive features a built-in braking resistor that not only allows the X4 to handle higher inertial loads out of the box, but allow it to warm itself even in the coldest conditions.
-
The ALP Series Industrial Hose Pump is a two roller Peristaltic pump designed to handle abrasive slurries, viscous fluids, and aggressive chemicals that are normally difficult to pump with other types of positive displacement technologies. The ALP Series is an ideal choice for metering, batching and transfer applications. Peristaltic pumps are becoming the standard for hard to handle fluids such as Sodium Hypochlorite that off-gas and vapor-lock diaphragm pumps. Self priming high capacity pump can be run dry without damage. Flow rates from 1 to 40 GPM (60 to 2400 GPH). Pressures to 60 psi.