613 SERIES CAGE-PROTECTED SUBMERSIBLE LEVEL TRANSMITTERS
NOSHOK CAGE-PROTECTED SUBMERSIBLE LEVEL TRANSMITTERS are ideal for a wide variety of industrial and municipal liquid level measurement applications requiring watertight protection. These anti-clogging transmitters are designed for severe high solids environments such as sewage, lift stations, storm canals, wet wells and slurry tanks where sludge, slurry or turbulence may be present. It features durable all 316 stainless steel construction and a large 2.14” diameter diapragm which is extremely responsive, even when monitoring low levels or buried in media. -
613 SERIES CAGE-PROTECTED SUBMERSIBLE LEVEL TRANSMITTERS
NOSHOK CAGE-PROTECTED SUBMERSIBLE LEVEL TRANSMITTERS are ideal for a wide variety of industrial and municipal liquid level measurement applications requiring watertight protection. These anti-clogging transmitters are designed for severe high solids environments such as sewage, lift stations, storm canals, wet wells and slurry tanks where sludge, slurry or turbulence may be present. It features durable all 316 stainless steel construction and a large 2.14” diameter diapragm which is extremely responsive, even when monitoring low levels or buried in media. -
612 SERIES SUBMERSIBLE LEVEL TRANSMITTERS
NOSHOK SUBMERSIBLE LEVEL TRANSMITTERS offer a previously unequalled level of performance. Utilizing diffused semiconductor and proven sputtered thin film sensor technology they are highly accurate, shock resistant and extremely stable for long periods of time. Reverse polarity protection and short circuit protection have been installed as standard features. Lightning protection is optional. -
Standard Features:
- 2" (50.80mm) and larger
- Process Connection Sizes 2" and 3"
- Maximum Working Pressure Conforms to Flange Pressure-Temperature Ratings per ASME/ANSI B16.5
- Flange Faces (125-250Ra Spiral Finish is standard)
- Raised Face , Flat Face , Ring Type Joint and Special Flange Faces are available
Download Datasheet
-
Standard Features:
- Standard Pressure Rating with Metal Lower Housing
- Process Connection Sizes 1/4 " NPTF through 1 1/2" NPTF
- Maximum Pressure Rating 750, 1500 PSIG (5,18,10.35Mpa) @ 100ºF (38ºC)
Download Datasheet
-
The Pepperl+Fuchs Bebco EPS 6000 series Type X/ Ex px purging system is a complete automatic system that will purge and pressurize the protected enclosure and maintain pressure within the enclosure.
Note: Vents are required for all 6000 series purging systems.
The 6000 series purge system reduces the classification within the protected enclosure from Zone 1 and 21 to non-hazardous area. General purpose equipment can be operated within the protected enclosure.
- Suitable for Class I and II, Division 1/ Zone 1 and Zone 21 to non-hazardous area applications
- Enclosure sizes up to 450 cubic ft. (12.7 cubic meters)
- The Type X/ Ex px system conforms to ATEX, NFPA 496 and ISA 12.4
- DEMKO, UL cULus, IEC Ex
-
600/700 SERIES PROCESS GAUGES NOSHOK PROCESS GAUGES are turret style dry or liquid-filled gauges. These gauges are made with phosphor bronze, 316 stainless steel and brass wetted parts, and phenolic cases that are specifically designed for demanding service in chemical, petroleum and industrial processing industries. They are widely used throughout the world on applications including injection molding machines, laboratory & test equipment, power generation, oil field & offshore, utilities, and water & wastewater. Extreme high pressure and extreme low pressure diaphragm ranges available. -
Automatic and accurate control of chlorine in potable and waste water is more important than ever due to health and regulatory concerns. Poor control can lead to failure of biomonitoring tests leading to an even more costly "Toxicity Reduction Evaluation." The 555 is a cost-effective way to upgrade chlorination and dechlorination processes in an easy to use, rugged 1/4 DIN size package. The 555 can be easily set up to handle flow proportional control, residual control, compound loop control with lag times, and dechlorination with sulfur dioxide. -
5530 SERIES 5-VALVE NATURAL GAS MANIFOLDS
NOSHOK 5-VALVE NATURAL GAS MANIFOLDS are designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve for natural gas applications. These valves are available in block, single flange, double flange, or double flange 90° angle connection for remote or direct installation. Flare Pattern™ configurations are optional, which provides maximum clearance for fingers during operation. The soft seat design features a replaceable Delrin® seat with straight through porting for bi-directional flow and easy roddable cleaning*.
*Isolation valves only -
The Pepperl+Fuchs all-new 5500 Series Type Z purge and pressurization system is the newest system from Pepperl+Fuchs that provides easy selection, installation, and operation for enclosures located in Division 2 / Zone 2 hazardous areas. The Type Z / Ex pz solutions consist of a control unit, vent, and solenoid valves. The combination of automation and configurable functions support even the most difficult applications.
- Automatic systems for alarm, purging, and power to the enclosure!
- Enclosure sizes to 450 cu. ft.
- Conforms to NFPA 496 and ISA 12.4 standards
- ATEX, IECEx, and UL certified systems
- Built-in programming
- Programmable temperature control
- Leakage compensation
-
The Pepperl+Fuchs all-new 5500 Series Ex pz purge and pressurization system is the newest system from Pepperl+Fuchs that provides easy selection, installation, and operation for enclosures located in Zone 2 and 22 hazardous areas.
Our Ex pz purge systems are designed according to European requirements—ATEX directive 94/9/EG. European protection methods allow multiple techniques to be used when designing hazardous area equipment.
- Automatic systems for alarm, purging, and power to enclosure!
- Built-in programming
- Programmable temperature control
- Leakage compensation
-
The 535 is a 1/4 DIN single loop process controller (SLC) designed to control any analog process variable (temperature, pressure, flow, level, etc.) in batch and continuous processes. The 535’s outstanding feature mix enables it to bring processes under control faster, more accurately and easily than competitive SLC’s, PLC, and PC based control systems. -
The 532 Auto/Manual Station ensures the integrity of your processes with maximum reliability. Isolated inputs and outputs guard against electrical interference, the front face meets NEMA 4X standards for watertight operation, and solid metal housing and sturdy rubber keys enhance durability. The 532 has been engineered to be the industry’s most user friendly and comprehensive Auto/Manual Station. It has three digital display areas, with two offering up to 9 characters of true alphanumerics. The bright, crisp vacuum fluorescent display offers better readability than any other display technology. Additional operator friendly features include: custom programmable alarm messages, keys that illuminate when in use and an easy-to-use menu system.